Search the Community

Showing results for tags 'simulator network ethernet'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 298 results

  1. Hello All, I would like to control Powerflex 525 drive with Omron NJ301-1200 PLC via Ethernet/IP (Set speed, start, stop). I've gotten until the part where I downloaded the necessary .eds files of the drive and imported into my Sysmac studio. However, I'm stuck after this point while assigning target variables and Originator variables and eventually setting speed and controlling the vfd. I've attached images for your reference.

  2. Change Subnet On CP1L PLC

    OmronOmicron posted a topic in CX-Programmer

    I am trying to change the subnet of this CP1L plc. Currently it is at 192.168.250.*** and I would like to change it to 192.168.54.***. I already tried starting fresh by writing to the controller with ip 0.0.0.0 and then putting my desired ip address after. When I try to write to the controller with a subnet other than .250 for example 192.168.54.13, the controller saves the node address(.13) but keeps the same .250 subnet which results in me being able to ping 192.168.250.13 successfully but get no response from pinging 192.168.54.13. Yes I did change my local network card when pinging different subnets and also did a network reset in CX-P after every ip change. Let me know if there is anything I am missing!! 
  3. Hi,I am running a Windows 10 VM with Rockwell Studio 5000 on a Windows 10 host PC. I communicate to the PLC network through a USB-C to ethernet adapter. Occasionally, the communications drop out, if this happens the only way I can re-establish comms, is to shutdown the VM and restore defaults in the virtual network editor, as this can happens a few times each day, it can be very frustrating.When this happens I cannot ping the host either, until the defaults are restored and the VM re-started.I am using the bridged connection in the VM.Can anyone help with this?Thank you
  4. I'm trying to understand the basics of using a serial to ethernet converter such as this Comtrol DM-EIP-2101, with Studio5000 code. Basically I have a weighing machine that only outputs data via RS-232 and I need to send that data to a PC that will process it through a Studio5000 program and have the data displayed on an HMI using FTview SE. Is it as simple as just connecting the serial and ethernet to the converter and it does all the work? Obviously checking ip addresses and firmware will need to be verified. The main thing I am unsure of is the process of passing the individual data packets from the machine to the Logix code on the PC,  things like what the weight of the item was, was it over weight or under, etc....  Would there be an AOI or tags built into the software for a machine like this Checkweigher? I've worked with much smaller items like Cognex Dataman cameras and I know you can just use their AOI that allows you to simply call a tag if you want to display information like if a scanned barcode was correct or whatever. If anyone has done something similar I'd appreciate any guidance. It can be difficult getting the information from the manufactures so I'm looking for answers anywhere I can. EDIT: I guess I should also clarify that only using one or the other (serial or E/IP) is not an option. It will be a serial connection from the Weighing machine to the converter and then Ethernet to the PC.
  5. Currently have a A1SJ71E71-B2-S3 in the system for coaxial (thin) ethernet (10BASE-2), it's connected to a conversion module for TP-cable and from that then to a PC with plain TP network card.  I was thinking about getting an A1SJ71E71N3-T to replace it and that way get rid of the converter from coax to TP. I wonder if it's possible to just have it hooked directly to the computer without hub - if I need a hub there's really no point in swapping - as there's still another thing between the computer and the PLC system that can cause problems. I was looking through the manual at mitsubiSIH.com and they seem to think they are connected to large nets with a bunch of hubs, PLC systems and computers. Appreciate thoughts and help. 
  6. Hi, First of all, thanks in advance for those who support and advises. I have a Modbus/TCP operational network as shown below. However, at any 1 time only 1 LAN is able to communicate instead of both LAN networks of the device. In another system with S.E Premium Unity PLC, both LAN networks are able to communicate at the same time. Thus, I would like to enquire if this is a limitation of Quantum NOE 771 whereby only 1 LAN can communicate at any one time or whether I have missed out any parameter/configuration settings? Any issue on the IP address configurations? Please advise. Thank you very much for the advise and assistance.
  7. I'm trying to set up an Ethernet/IP communication with a CIP block between a Micro850 and a SMC EX600-sen3 pneumatic Module. I can read the inputs of the module with the configuration below, but I CANT write to SET or RESET the digital outputs. There are NO errors showing communications issues in the CIP Generic Block I am using... I read that for some reason, it seems that there are problems with writing thru Ethernet/IP protocol between Micro family and other devices not from Rockwell... Does anyone know if there is a way to make it work? Configuration that is working to READ: CIP Service Code:     14 CIP Class ID:         4 CIP Instance ID:     100 CIP Attribute:         3 CIP Member ID:         0 Configuration that is NOT working to WRITE: CIP Service Code:     16 CIP Class ID:         4 CIP Instance ID:     150 CIP Attribute:         3 CIP Member ID:         0

  8. Hmi modbus TCP/IP device communication

    mustafa.celik posted a topic in HMI & SCADA

    Hi all; I have Delta DOP110 IS hmi and i have a modbus tcp device. I want to communicate hmi and device with modbus tcp/ip but i didnt understand device's register address. For example, input bytes 0,1 analogue control word, What is the register address? 40.000 or 40.001 can you help me ?  
  9. Hello. I start learn GXW3  and i have problem with simulation. I trying to connect GT Simulator with GX simulator 3, but it's doesn't work. GT Simulator 3 easy connecting with GX Simulator and GX Simulator 2 and it's working. So i can't say that problem in GT Simulator 3, but GX Simulator 3 works too, when i starting it. All software configurated without any errors (IQW,GTW3,GXW3). I using GX Works3 1.026C, GT Designer3 1.151H, IQ works (melsoft navigator) 2.12N.   All time when trying to connect, popups this msg. Settings of GTS3 Note from HELP. Does someone know how fix this problem?  

  10. Real world simulator

    Aneesh posted a topic in CX-Programmer

    When we simulate a plc program we have to manually input the changes in input(like magnetic reed switch) For example when a cylinder goes from up to down reed turn OFF and reed down turns ON Is there any program available where we can define such things that will turn on and off during the process automatically.

  11. GOT1000 HMI with Q03UDE PLC issue

    python01 posted a topic in Mitsubishi

    I have a bit of an issue with communication between GOT1000 HMI (I think the exact model is GOT1675V) and Q03UDE PLC over Ethernet. The GOT is set to 192.168.1.4 and PLC is set to 192.168.1.2 but I get the error "Communication Error. Refer to System Alarm in Utility Menu". Now how do I access the utility menu? I have tried to tap and hold on the upper corners of the HMI but nothing happens. I also can not switch between screens when I press buttons even though they are directly linked via screen #. Almost like the HMI froze up. Wonder if anyone had similar issue and what the solution might be. Thanks for your help.
  12. Hi! I would like to ask your help. I want to know more about the communcation systems what allen bradley use. Most important for me, is Ethernet IP communication, Controlnet communication, Sercos (servo) communication, maybe devicenet communication.  I know I can find some manulas on the web, but I thought I ask it here too, maybe you guys have some more documents which is contain more information. Every information is highly appreciated. Thank you very much guys.  

  13. Help with LAN network

    Cwayman posted a topic in Mitsubishi

    I am trying to set up a brand new network of PLCs and GOTs in a classroom. Something I haven’t ever done before.  I’m using simple Ethernet and going from a pc to a switch then the switch to each device.  I can not get anything to communicate to each other.  I can read from one GOT or one PLC but that’s it.  Any help would be appreciated, thank you!
  14. Hi I am looking for a way to read and write data from PLC omron words, bits via FINS or EtherNet/IP protocol using python programming lang. Does anyone have any results in this? I really want to see your work, because all my attempts have failed. Thanks.
  15. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I

  16. KINCO PLC as MODBUS RTU slave

    Francisco1998 posted a topic in Other PLCs

    Hello to everyone. I hope you are doing well. I'm trying to establish a communication between my PC and my KINCO PLC. The manual states it supports MODBUS RTU protocol, so I downloaded two different Modbus Master simulator I found out: Multiway from OMRON and qModMaster. None of them seem to work properly. I attached some pictures of the messages I get. https://ibb.co/f1mCSNt Multiway message https://ibb.co/bP5cX1t qModMaster message I include the configuration of the communication parameters. https://ibb.co/nMty8D9 PLC parameters https://ibb.co/6RTqVfC Multiway parameters https://ibb.co/N1XTccd qModMaster parameters According to the manual, in order to play the role of Modbus master with the PLC it's necessary to configure some instruction blocks (I'm programming in ladder). However, I could not find any block to configure as Modbus slave. I don't know what else I can do. I'm in trouble with this task. Am I making some mistake? Thanks for your attention.  Kind regards!
  17. Hey all, I am having some issues with a Keyence IV2 camera which has Ethernet/IP functionality.  To summarize briefly, it has been configured and reading the data into my PLC (NJ501) into a structure data type.  The issue I'm having is that I cannot control this on a bit level for triggering the camera, etc.  I was reading that a Union type is the way to go, but unfortunately, I stopped getting data into the PLC when setting it up that way.  According to the configuration guide for Rockwell and setting it up in the Network Configurator, I needed to go with the SINT type.  When registering the device, the 8-bit option was necessary since the Input/Output sizes needed to match.  This was predetermined by the EDS file for the IV2. I am stumped as to how to get the data to read into the Union Type, and any suggestions would be greatly appreciated. Thanks, -K  
  18. I am trying to set up a ifm AL1322 EtherNet/IP IO Link Master to communicate with a NX1P2 or CS1 PLC. When using Network Configurator I have added the EDS file and added the AL1322 to the network and set its IP address.  It shows all the parameters in the device but if you make a change it says it has downloaded but nothing on the unit changes.  If you make a change to a parameter and then verify it says there are no difference even though there are.  I have set up the communication with the PLC but there is an error  Establishing a tag data link connection failed. This is the same for both the CS1 and NX1P2. I have also tried setting it up using Sysmacstudio for the NX1P2 and get the same result.   I have had the unit back to ifm and there is no issue with it running with an AB PLC.  I can also communicate with the unit using the ifm LR software. Any ideas why the Omron software is unable to read from or write to the unit? ifm_IOL_Master_AL1322.eds
  19. Hello, I have to make communication using Ethernet between omron CP1H and siemens s7-1500 plc. I was thinking about Modbus TCP or Ethernet IP using theese adapters: Modbus TCP - CP1W-MODTCP61 Ethernet IP: CP1W-EIP61 But I am quite new in Omron, and I am looking for some exapmple codes, FB. Do you anyone have experience with that?   Thanks for all responses.
  20. Good day everyone, First post here so hopefully I'm not violating community guidelines in anyway. I've got a system that has some 50 odd Micrologix 1100 and 1400 in use and I'm currently working on setting up an auto timesync for all of them using just 1 of the PLCs that will be my master time PLC. So far I've put together the logic for all the message instructions with the corresponding IP of the slave devices. I'm running. Into an issue with not being able to terminate/break the message connection on a PLC that I have already synced. Is this even possible to do on the ML1100. Once I get to 16-17 messages DN it starts to ER and will not complete any further messages. What I have is a message instruction ladder with a timed trigger to activate a MSG and write the RTC data then time down and connect and write to the next and so on. When it triggers the message instruction of one PLC it also fires an OTE to trigger the BK of the previous message instruction. However it doesn't seem to be actually cutting the message connection and holds it persistent until a power cycle/download event.
  21. I want to establish Ethernet IP communication between the following PLC CPUs. Schneider Electric - BMEP582040 Honeywell - ControlEdge UOC CPU900-CP1. Where the Schneider must be master and Honeywell must ne adapter. Let me know if anyone have done this or can help me to do so.
  22. Hi. When i run the plc in the simulator, only certain stuff seems to work, most logic seems to work. Timers seems to refuse to start at all, the sim is in RUN mode using Sysmac 1.45 Standard edition.

  23. QCPU to 2x kyence iv2

    sczot posted a topic in Mitsubishi

    Hello all, we are using Q03UDECPU and via built-in ethernet port its connected to two IV2-G30. (through unmanaged switch) to establish connection we are using FB LQnUDEEthActive (hereinafter referred to as  FBLQ) two instances of FBLQ in two instaces of our FB which is responsible for creating messages that are then send via FBLQ Both keyence devices have different IPs, ports and connection number. Problem is that it is working flawlessly, except the time its not working :/ from time to time it simply doesnt trigger Keyence device. It looks so far like its independt of turning machine OFF/ON, also both keyence devices are used in different times (about 10-20seconds of difference) Im currently working on sime kind of internal diagnosis to see whats happening when its not working, but im just curious if there is something obvious we are missing? any help will be apreciated Thanks  

  24. Fatek Ethernet PLC Module online

    Yasir_66 posted a topic in Other PLCs

    Dear All,  Anybody can help me in communication between Fatek 20MAR2 & CBEH2A. The jumpers setting are JP1 is on left two pins (No password protected) & JP3 is on right two pins (forced boot operation mode). The Ethernet cable i used is type b T568. Fatek Ethernet module config software detecting module successfully (shown in attached pic) but on online PLC via ethernet cable its showing connection failed.   please help   thanks in advance
  25. Hi, I'm currently in a project where I'm putting up together a network where a CJ2M-CPU33 is reading the memory of 4 G9SP safety controller and communicating with an unchosen HMI. Since I'm new to Omron communications, I've decided to set up a network composed of only 1 CJ2M-CPU33 and 1 CJ2M-CPU31, both equiped with built-in EIP21 port, to help me understand the FINC protocol used to Read/Write and other commands from one PLC to another. I'm currently trying to use the CMND(490) function in the CJ2M-CPU33 to attempt and read part of the D memory in the CJ2M-CPU31 without success. I've tried many ways of sending the Hexa code to the PLC I'm trying to read the memory from but always come up with a 0401 end code (Service unsupported: Undefined command) or nothing at all when my Hexa code is really messed up. It's also good to know that the informatician of the company has succesfully read from the memory area but with his computer. I have provided with this topic an overview of my setup, settings and program in the PLC that is performing the CMND(490) function. I'd also like and take this opportunity to say that I really don't understand the settings in the FINS/UDP and FINS/TCP menu and when and how the PLC is using these protocols even if I've read tons documents on the FINS protocol. I find that that Omron's doc is complete but kinda lacks of setting and program examples. FINS_Problem_description.docx