Search the Community

Showing results for tags 'data'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 103 results

  1. I am working on resolving issue in Press Machine where previous engineer has developed logic as per attached file. the atatched screen of HMI can only access by Engineer and only Engineer can set value of SPM (Stroke per minute). Once switch is set on the SPM of any job can not go beyond set value. The issue I am facing it when we power cycle, the switch get off and the register D2842 get SPM back to normal (set as per the die data) not by eng. How I can hold that data after Cycle power?  
  2. Emerson (GE) memory map data types

     I've always had this Allen-Bradley memory map taped on my wall in my office. It used to be handy to use, until I remembered al of the prefix letters for each data type. Now I am using Emerson (GE) the old proficy software now called PAC ME machine edition. Now I'm finding it's about impossible to find the data type list amongst the thousands of help files, videos, ect... it seems like a simple thing to find, but I'm not having any luck. They use I and Q for regular inputs & Outputs, but there are R files, M files, S files, N files, G files, ect.... this is old-school PLC software that doesn't use tag names.   Is there a steadfast rule for each type, or can they be used for any type of data? Dazed and confused...  
  3. Hi All, I need access to a the Safety function blocks within a safety CPU using sysmac studio on a machine we are upgrading.. Is there a generic password available to gain access? Best Regards, Paul  
  4. Dear reader, I am writing a C# program using the library  ‘EasyModbus’ that needs to communicate with Siemens WinCC via the connection type ‘Modicon modbus’ I have written a version using the ‘float’ data type in WinCC and that works perfectly. Here my code fragment: Method to convert ‘double’ to bytes in C#: public static byte[] DoubleToModbusFloat(double value) {     byte[] bytes = new byte[4];     float floatValue = (float)value;     int intValue = BitConverter.ToInt32(BitConverter.GetBytes(floatValue), 0);     bytes[0] = (byte)(intValue >> 24);     bytes[1] = (byte)(intValue >> 16);     bytes[2] = (byte)(intValue >> 8);     bytes[3] = (byte)intValue;     return bytes; } Call of the method and loading of the modbus registers in EasyModbus: Bytes = PublicCode.DoubleToModbusFloat(TmpDbl); int n = (int)ModbusStartAddress + ((i - 1) * 2); mb.ModServer.holdingRegisters[n + 1] = (short)((Bytes[0] << 8) + Bytes[1]); mb.ModServer.holdingRegisters[n + 2] = (short)((Bytes[2] << 8) + Bytes[3]); So far so good – this works fine. But I also want to be able to use the ‘Double’ data type in WinCC because I sometimes need more precision than the 7 figures of the ‘float’. I thought it would simply be a case of doubling up the code so I wrote: Method to convert ‘double’ to bytes in C#: public static byte[] DoubleToModbusDouble(double value) {     byte[] bytes = new byte[8];     long intValue = BitConverter.ToInt64(BitConverter.GetBytes(value), 0);     bytes[0] = (byte)((intValue >> 56) & 0xff);     bytes[1] = (byte)((intValue >> 48) & 0xff);     bytes[2] = (byte)((intValue >> 40) & 0xff);     bytes[3] = (byte)((intValue >> 32) & 0xff);     bytes[4] = (byte)((intValue >> 24) & 0xff);     bytes[5] = (byte)((intValue >> 16) & 0xff);     bytes[6] = (byte)((intValue >> 8) & 0xff);     bytes[7] = (byte)(intValue & 0xff);     return bytes; } Call of method and loading of the modbus registers in EasyModbus: Bytes = PublicCode.DoubleToModbusDouble(TmpDbl); int n = (int)ModbusStartAddress + ((i - 1) * 4); mb.ModServer.holdingRegisters[n + 1] = (short)((Bytes[0] << 8) + Bytes[1]); mb.ModServer.holdingRegisters[n + 2] = (short)((Bytes[2] << 8) + Bytes[3]); mb.ModServer.holdingRegisters[n + 3] = (short)((Bytes[4] << 8) + Bytes[5]); mb.ModServer.holdingRegisters[n + 4] = (short)((Bytes[6] << 8) + Bytes[7]); However, this code does not work correctly. I have tried all combinations of byte and word reversal, and whatever I do WinCC either displays nonsensical values or ‘####’ showing that it cannot display the value. I have tried reading as much documentation as I can but it still looks to me as if I am doing the right thing. Also, I have downloaded a number of ‘modbus master’ code examples, and they seem to be able to read the ‘Double’ from my program without any issues. In WinCC I also see that there are two types of double – ‘Double’ and ‘+/- Double’ – I am also unsure as to why this is – there is no ‘+/- Float’ data type, which seems inconsistent to me. I am obviously missing something, but cannot seem to discover what exactly. I hope that someone can point me in the right direction as to what I am doing wrong. Please see attached word file for a picture of the configuration of the connection in WinCC.   Thanks in advance for any help !, Dave Long Double trouble.docx
  5. Data register over flow

    Hi, data registers are getting full, because of extremely high speed pulsing is there any way , if the data value in register goes above the capacity of 32 bit register, it automatically attaches itself to next set of data registers so lets say if data was written in D10,D11 Upon reaching the limit, it goes to D10, D11, D12, D13 please share if there is an alternate way to do this
  6. Data register over flow

    Hi, data registers are getting full, because of extremely high speed pulsing is there any way , if the data value in register goes above the capacity of 32 bit register, it automatically attaches itself to next set of data registers so lets say if data was written in D10,D11 Upon reaching the limit, it goes to D10, D11, D12, D13 please share if there is an alternate way to do this
  7. Hi, I'm Jovel, I'm new to learning how to program PLC. Just want to learn how to use Omron Sysmac Studio . I have a question about the Data Type Data Type - Structure ( Offset Type - Offset Byte )  / Union   I Don't Understand this 2 Data types and how going to use them, can anyone teach me and have a sample program? Thank you
  8. Hi All I am trying to connect Cognex OPC Server with Mircrosoft SQL Server (SMSS). Do you have any idea how to do that? I couldn't find relevant information online.
  9. I have an old Panelview 800 in a system that consists of the PV, a Micro 850 and 10 Powerflex VFd's running conveyor motors. My problems started when one of the motors would not run. It seemed that the PLC was not sending the Run command or the Speed. The problem got worse as I was working on it when two others did the same thing. The current situation is that 8 of the VFD's are getting a Run command and 2 are getting a flickering command. All 10 are getting a 0.0Hz speed command. I connected to the equipment with my laptop and looked at the PLC program and the PV program. I found that in the PV program that all of the user input data, which consists of Motor Speed (Hz), Accel and Decel times and some other timer values for the timing of some conveyor starts and stops, where all gone, set at '0'. this equipment is several years old and predates my presence here. The PLC program seems to be running and passing the commands that it receives to the VFD's. The data is passed to the PLC via Global Variables. I've never encountered this particular problem before. Any ideas?
  10. Hi, I have a problem with Omron PLC and Beckhoff IO. The IO just disconnects in a few minutes and comes back! I received different errors: Link off error, Illegal slave disconnection, process data reception timeout. When I also check "Display Diagnosis/Statistics information" I see errors on all ports A and B of all nodes.  I have called and talked to both Beckhoff and Omron.  I have two NX1 and one NJ101 to test. And I have three EP2318-0001. I have the same problem with all the PLCs and EP boxes. It does not matter if I have one, two, or three nodes. I have tried different revisions of the EP2xxx from the XML file, different settings for the slave, different task periods, and the error still is persisting.
  11. Currently have NX PLC setup as an OPC UA server and an OPC client setup and communicating.  The issue is only tags that do not have a Data Type are showing up in the OPC client.  I have 2 separate OPC softwares connected to this plc through OPC UA and both are having same issue.  If I setup the OPC as a polling service, then all the tags show up as expected.  Does anyone know if this is a known issue with Omron and their OPC UA server, or is there something that I am doing incorrectly (possibly a setting within Omron that I am not aware of)?
  12. NE1A-SCUP02-EIP

    Does anyone have experience with the NE1A-SCUP02-EIP safety PLC? We had a machine shutdown yesterday with a L9n4 error on the NE1A unit. The manual says this is a tag data link error. Does this cause the safety PLC itself to shutdown? I always thought the EIP portion of the safety PLC was only used for status reporting to the PLC. The safety portion is strictly on DeviceNet and is independent of the EIP network.  The CJ2 PLC's error log tells me it had problems communicating with the safety PLC, the VFD, and NX I/O's which were all in the same panel going through an Ethernet switch. 
  13. Hi, I have quite a noobie question. I want to create a function block to do some simple operations on 2 variables. Both variables are In/Outs (see picture attached). How can I make this function accept variables regardless of the data type? Given these is just simple math I am able to use the same instructions in REAL, INT, UINT, etc. But, the function block only lets me assign one Data Type to the In/Out variables.
  14. Data Historian

    Hello, What would be the best data logger for Backhoff automation based automation? Idea is to record some analog and digital tags at certain time intervals. Present them in tabular as well as graphical form and print some reports based on selected time window. I have looked up TwinCAT Analytics and that seems to be one option. But want to check others before making decision.
  15. Hi gents, I need to build up a communication between nx1p2 to another omron plc (any type with sql support). This is due to the fact that I have finaly to prepare the plc communication with the sql database, and nx1p2 doesnt support this.  Sorry, i know it's probably a noob question, but I'm a beginner. What type of technology i shoud use to make this connection between NX1P2 and another Omron PLC? Or might be some share some project?  
  16. Hey guys,   I know this is a topic that has been discussed before, but I am having trouble finding exactly what I am looking for.. I want to know the most efficient way to record data from my PLC to an Excel file on my PC. I want this to be done without the use of the PLC's webserver.  Specifically I am trying to record vfd speed every 10seconds with a time and date stamp. How can I do this?   Thanks, James  
  17. Hi, I have inserted new RTD module into in my SLC500 as replacement to defected RTD module however the module LED is enabled but the channel LED's are blinking. I have checked the following: In the advanced I/O configuration the module configuration is shown as expected In the data file word format it is not corresponding to the channel preferences What should I do and how to fix the word bits?        
  18. Open data log in HMI

    Hi there! I have S7-1200 controller connected to a Comfort Panel. The machine has some pressure and temp sensors, as long as many valves and other stuff. I generate a daily datalog with some of those variables but, the thing is, I've been trying to figure out how to show these data in the HMI without using a trend viewer. I don't know if it's possible, but I want to be able to see what valves were open (for example) the day DD/MM/YYYY at HH:MM:SS, using the generated data log, kind of knowing the state of single bits at different past moments. I've been searching the web but I didn't find something exactly like this, don't know if I'm doing it properly so I'd like to know if you have done this or you can throw some light on the topic. Thanks in advance and hope you can help me!
  19. Have been able to exchange data types of BOOL, INT,  DINT & REAL between Omron NJ/NX CPU with Allen Bradley Logix CPU's with Ethernet/IP using the CIPUCMMRead & CIPUCMMWrite instructions. I now have a need to exchange "STRING" variable types. Have tried varions string lengths in the NJ without sucsess. AB default string length is 82 & Omron 256 but I think the difference is the length headder that AB has with within their String Tag type. I know I could convert my strings to an array of bytes & sent them this way, but was looking for a solution to sent them as native strings. Hope someone out there has done this & can share their leg work? 
  20. Hi I'm trying to set up Modbus RTU communication between FX3U PLC and a weigh module. I would use the ADPRW command using 0X03 to read the 16 bit Holding Register but in the weigh module the Data Address/Holding Register of the value I want to get is 400047 - 400048. How to translate the value in 16 bit?   Thanks, Fabio
  21. Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS  
  22. NB Data log

    Hi there!  I need to implement a data logging that saves the log in a USB storage for a machine and just started searching for some info about data logging in NB HMIs. Up to now I'm clear about using the Data History function and the sampling method I'll be using but I still have some unclarified doubts about this. 1.- The data log should sample the value of, let's say, a couple of words, each second for an entire day (6:00 am to 6:00 am). NB's manual doesn't say a lot about Storage Type and Buffer Storage in "Save Data History" tab. Does "daily file" mean It deletes the .CSV file daily and it generates a new one? If is it, at what time does this occur? Does "single file" mean it generates a file and won't get deleted? Does this mean the sampling stops when completing the first one? Is "storage period" used to keep the file after the next log begins? 2.- Is it necessary to display the element in order to make the log work? Or can it be placed in a random screen you only enter once a day? 3.- In the "Channel Properties" tab. If I need to get the binary value of a word, do I need to set the max. limit to 65535? 4.- I asume that "Sample points" value doesn't matter when selecting Continue sample mode. Am I right? Thanks in advance, any help is appreciated.  
  23. Data Logging with GT Designer3

    Hello, I am trying to log data using GT Designer 3 and I'm having no luck. I found some sort of online documentation and even going through the myriad of steps still find my self unable to log anything. I am using the melsoft project navigator and GX Works 2 to simulate the logging of just one 16 bit signed word with a constant value. As logging data is clearly not as simple as just specifying D100 or D200 as the devices you want to log, I am hoping someone else on here has some experience on this matter and can help me out.  Thanks for any help in advance.
  24. Dear Friends, I have made this video to show you how to take data samples from Delta DVP PLC and save this log file in the Weintek HMI internal memory. The Weintek HMI internal memory is easily accessible using ftp. All the necessary steps are mentioned in the video. The link of the video is given below,    
  25. Hi all, I am currently having a project of polling data from PLC CJ1M using Advantech ECU-1051 IoT gateway which support rs-232 serial connection (Host Link) to poll data from the PLC for data acquisition and monitoring, I would like to use peripheral port since rs-232c port is used for HMI. However, I am currently stuck at make the connection between those two devices. I did setup same transmission configuration between them (baudrate, Unit number, start/stop bits,...). Is there any configuration that I have missed to make the communication works?