Search the Community

Showing results for tags 'factroy talk se v8.0 screen problem'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 72 results

  1. CP1E-N40 + CP1W-TS102

    Hi ! I have a question regarding the handling of the signal from the TS102 connected to my PLC.   I downloaded a .pdf  LINKED from "my omron", read it and put together a small program just to test the expansion unit and sensors. But I cant get any readings from the sensors and can't figure out why. I have never used a TS102 expansion unit before and would be glad if someone have an idea of what I'm doing wrong. Everything is brand new, so I'm quite sure I am the problem here..... If someone have an answer and maybe even an programming example to upload I would really appreciate it. Best Regards!  PT100 sensor test 3.cxp
  2. Factroy talk SE v8.0 screen problem

    Dear Experts!!! I am facing one problem in FT View SE v8.0 : I have 15 screens : 5 "are replaceable" with full resolution and other 10 are popup displays with half the resolution of that of Monitor and are "on the top" type. I have a buttons to go to those pop up screens. Whenever I press any button to open any pop up screen the background screen (Replacable type, full screen) becomes shorten and pop up displays works like they should. i.e. whenever a pop up display opens, full background screen display suppresses automatically. Then i go to another full screen and then come to the main working full screen then it becomes ok. This phenomenon occurs whenever a pop up display open (not VBA controlled). Its a simple display open button ( not VBA controlled) As you can see in the picture the back image is suppressed :- http://postimg.org/image/c5um49c5h/ Normally it comes to full screen , its like :- http://postimg.org/image/vtli1bd7f/ when I go to some other replaceable type screen and come back again to this screen, it becomes OK. Here in this pic below, you can see the properties of the screen which is giving problem :- http://postimg.org/image/gcqpkfb65/
  3. Dear All!!! Please tell me the way how can i delete recipe from Runtime. There are only save and restore options in the inbuild recipe function. I am using inbuild recipe function. Factory Talk View SE v8.0 (all the patches till date are installed) I have RSView32 VBA code but i am not able to use it in FTV SE Please help me with it!!! Private Sub Display_AnymationStart() Dim sRecipes As StringList Dim vRecipe As Variant On Error GoTo ErrHandler Set sRecipes = gProject.GetComponents("recipe;files") For Each vRecipe In sRecipes LstRecipeNames.AddItem vRecipe Next vRecipe ErrHandler: If Err.Number Then gActivity.Log Err.Description Err.Clear End If Set sRecipes = Nothing Set vEachRecipe = Nothing End Sub 'user selects the recipe name in the list box, and then presses delete button Private Sub cmdDeleteRcp_Click() On Error GoTo ErrHandler If LstRecipeNames.ListIndex = -1 Then MsgBox "Select a recipe to delete" Else 'delete the recipe file, and remove from the project gProject.DeleteComponent "Recipe;files", LstRecipeNames.Text 'remove the item from the listbox LstRecipeNames.RemoveItem LstRecipeNames.ListIndex End If ErrHandler: If Err.Number Then gActivity.Log Err.Description Err.Clear End If End Sub The bolded points are problem, Bypased the error handler , but please lemme know how can use use this commands in FTV SE, as VBA in SE is client based blah blah... gProject.DeleteComponent "Recipe;files", LstRecipeNames.Text
  4. PIDE autotune problem

    Dear Experts!!!! Can you tell me the complete clear cut procedure of  PIDE autotune functioin And plz tell me when i shoukd do it ??? I.e. when the set point near the actual or when its far away and reaching to the SP. Can't i do it in FBD in Auto mode :  If yes then how??? Have to put FBD Block in manual mode always???? Any other way to autotune it???  
  5. Dear  Experts!!! I want to log each and every tag if its value changes from the SCADA. Please help me. Please be clear about all the things. I don't wan to write all the tags in the event server in deviation tab. Its a very long time taking process.   Is there any other way to do it efficiently.
  6. Event Logging : Factory Talk View

    Hi!!! Could anyone tell me how can i log a single single event happening in Scada like login/logout, any tag changes value, operator input etc. I don't have any historian. 1. without making event list of every tag in development 2. using VBA 3. with the help of SQL It would be highly appreciable. Thank You.
  7. Hello, I tried to download a .mer file. I have never seen this error before and how to fix this error. This is what I found from panel view plus compact manual. "Error: Unable to load non-Compact Machine Edition application. Please load a compact Machine Edition application." How do I load a compact machine edition application?? I attached a picture of the error I took. Thanks for reading :)
  8. Hello! I am programming with FT view studio version 8. In the program, when I make numeric display, I can not input values for this tag I am using in the display. Then I decided to make 'invisible button' for enabling the input for this tag which is shown in the numeric display. This is okey for me, only if there is other ways to do this please tell me. Now when I have created this numeric display with input enabling -'group', I have a problem, how can I use security levels for this group, so that only logging in values can be set? I have found that there is security code selection for this in the screen displays, but not for the buttons.
  9. GT Designer 3

    I want to put a Numerical Input on the screen to show a timer counting up. How do I make the display show whole seconds instead of tenths of a second as set by K in the timer? Is there somewhere that I can divide the input by 10? Thanks Denbo
  10. OMRON CJ1M CPU 21

    Hello to all Since a certain time I've noticed that the parameters values sent to the plc via IHM are not anymore recognized by the plc I'm obliged to re-enter other parameter values to see the machine working fine again. The plc reference is: CJ1M CP 21 The IHM reference is NS10 What would be the problem,? Best regards.
  11. CS1G-H CPU42 with CS1W-PRM21 problem

    Hello everybody, I have a problem connecting CS1G-H CPU42 with CS1W-PRM21. Prm21 is inserted in slot 9, and i have previously made connection to prm21. After downloading configuration to prm21 i cant connect to prm21 anymore (connection to plc is working fine). The cx-configurator says CS1W-PRM21 PROFIBUS DP-V1 Master Communication Failure with UnitERH is on (red), BF is flashing red, RUN is on (green), PRM is on (green) and BST is flashing green. How can i restore comunication with the cs1w-prm21 to diagnose the problem? After some examination the problem is (probably) that i have configured prm21 to write in the adresses of CIO3000 to CIO3400. That is interfiering with other address. Is there any way to force the output of the prm21 off, or make device go in offline mode.At the power on of the prm21, i can test the connection via cx-configurator and is working and after 2 seconds the prm21 goes to stop mode and begin writing to address of the sysmac bus area. I am thinking if i can stop prm21 from writing to that area i will be able to connect and load default configuration.is that any way to stop the prm21 from automatic start? or is there a way to reset prm21 to factory settings? best regards
  12. Good day, I´m helping with small project and currently i am stuck because of this problem. And I hope you can help me out. I´m using PowerFlex 525 connected with AB CompactLogix 1769-33ER PLC via EtherNet/IP. Connection is working, I can read and write values from/to 525. To configure both devices i´m using RSLogix 5000. 1) First problem occurs after I loaded configuration to 525 and it´s, that 525 keeps overwriting values of Accel and Decel Time 1. It happens when i directly change parameters in Module Properties (online) or after I upload configuration to device. It happens even if i set parameters directly to 525 with its HMI panel. - I kinda get around this problem when i use Accel/Decel Time 2 for Step logic, but if i send direct reference value motor still jump to it and that is not good, especially when changing direction of rotation. 2) Second problem is that I cant get Speed Sources and Start References right. Usually Is working only option 1 and others are not, or they are doing something else that they should. For better imagination this is what i want to do: I have 3-state switch (left = 1 ON(DigIn TrmBlk 02), 2 OFF; center = 1 OFF, 2 OFF; right = 1 OFF, 2 ON(DigIn TrmBlk 03)), In center position I want to control 525 with EtherNet (already working when: Start 1 AND Speed 1 = EtherNet/IP). In left position I want to control motor directly with Drive Pot and In left position a want to start Step Logic (which i have already set) - Funny thing, If I set Start 1 = Ethernet, Speed 1 = Step, Start 2,3 = DigIn, Speed 2,3 = Drive Pot then in all three position motor goes in Step logic.. Or when i get left and right position working then Ethernet is blocked.. and this kind of things.. I Attach print-screen of my current settings, if you need something more just, tell me. Thank you for your time, and I hope someone will be able to help me.
  13. HMI Remote Viewer

    Hello, I'm from Poland. I would like to use the Sony Xperia Z to communicate with Omron NB screens using free software Omron HMI Remote Viewer. Unfortunately, I can not install this software. The attempt ends with the message "Your device is not compatible with this version". Android have software version 5.0.2. Does anyone in this matter can advise me something? Thank you in advance. Bogdan
  14. Hi guys, I have a problem with GX IEC Developer 7.04, i hope some of you can help me. When i try to connect with the PLC type - Melsec FX1s- 30MR-DC, there is an error: I check all COM port settings, and everything is ok. Com_port parameters: FX Parameters: Transfer setup: PLC Type in the program is the same like physical one (FX1s). I try to change all of this stuffs but there is no result. The cable I use for comunnication is this type: Thank you very much in advance. Have a nice day! eng R. Bukov
  15. Hey All, I am trying to do some data storing on a PanelView+ and the built in data logging doesn't quite fit my needs. I was looking into the possibility of creating my own ActiveX control for doing this. Is it possible to create custom ActiveX controls for Factory Talk? If so, are there any tutorials for doing so you recommend? Also, are there any sites that have custom ActiveX controls to download? I realize this may not be the easiest thing to do, but if I could create my own I could use it for various machines and would make things a lot simpler in the long run. Thanks
  16. CPU 314IFM adress

    Hi, I have a CPU 314IFM order number 6ES7 314-5AE10-0AB0 when i select it in hardware config it show I/Q adress 124 -155 while it should be to 129 only (the manual mention that and it covers all inputs and outputs and the special funaction also) I try (offline) to change the order number only (another 314IFM) found it give different address range for each CPU while it all have 20 DI/16DO 4AI and 1AO
  17. We are a vendor specializes in industrial automation field. many customers almost from all the world order industrial products on our website FastToBuy.com. we sale products include industrial control system PLC, HMI, Motors, even industrial PC and accessories, communication device, electronic components. Also we are the agent of many China integrated circuit factory. Not only supply all kinds of low price LCD screen products, you should know most of LCD Made-in-china is cheaper than other famous industrial brands and with a high quality, but also supply efficient solutions to solve our customers, we gained a reputation in industrial automation field, on eBay and AliExpress, you search "fast to buy" can find us,. In a word, we only want to make more people know us, we supply nice products with a high quality service.
  18. Hello all, I'm new to this forum, hope I will be able to get some answers on this forum. I'm wotking on maintanance for machines under productiona and I would like to conect one machine to my work PC. But when I try to setup conection with RSLinx, RSLinx don't see my PLC. Problem is that my PC is on network with IP addresses 192.168.8.XXX and machine is on 192.168.0.1 IP address and between is cisco RV180 routher which is set to have LAN address 192.168.8.168 (company network), and WAN is set as 192.168.0.200 (subnet 255.255.255.0, gateway 192.168.0.201, dns 192.168.0.202). When I conect directly 1756 ENBT/A card to my laptop (laptop is set to same range of IP addresses) I can see PLC and everything is working but this way is not practical for me. Is there any way to conect my office PC to PLC, some settings in RSLinx Clasic? Any idea would be helpful. I attached simplified network drawing for easyer understanding. network.pdf Thank you for your time and help, best regards, baric1007
  19. Keyenece , read PLC KV40

    Anyone know how to read a program of KV 40 with protection MEMSW $ 8,000. It's an old ladder diagram I want to retrieve. I've seen this link which talks Pseudo reading it. Link http://forums.mrplc.com/index.php?showtopic=6782 Thanks, Ágora
  20. I am trying to setup communication between an EIP21 and a AB Compactlogix processor. Setup both units with Network configurator and Logix5000. In Logix5000 I used the Generic Ethernet Module with the correct consumer and producer tags and instances. When I go online Logix can see the EIP and bring up the module information but the connection itself is in Error 16#0114 Electronic keying Error. Unfortunately cannot find a way to disable keying like possible on the Controllogix Ethernet module. Can Anyone help. An application example or some tips how to resolve it would be great. Kind Regards Rolf
  21. Hi, Is there a way to record/log any operator activity in FTView SE? I have been working around FTView SE to find how to log/record operator activity (such as changing setpoints, valve commands, operation modes). I used to work with Wonderware most of the time, and I could just configure to log/record a tag such that any operator activity with that tag is recorded in the alarm history/summary. So, how do we get around this in FTView SE? Thanks, Junot
  22. I am trying to upload from Panel View Plus 600 to my laptop using Factory Talk View ME via Ethernet. The RSLinx Enterprise does see the Panel View but when I hit the upload button I get the following error message: "The source selected is not a valid device. Please select a valid source and try again." Does anyone know what is the issue? I am attaching screen shot to visualize what is happening.