Search the Community

Showing results for tags 'analog programming'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 140 results

  1. Hello, I am trying to have single press and double press etc. functionality in my PLC program where for example, single press will turn on the motor whereas double press will turn on the motor for 5 seconds. Is it possible to achieve using ladder logic in sysmac studio, if yes, how? Thank you in advance.
  2. Hello Friends,This video guide you about the programming of Schneider Altivar 312 VFD using SoMove software. From this video you can learn about1. Using SoMove software to program the Altivar 312 series VFD.2. To control the induction motor using control terminals of ATV312.3. To control the induction motor using the SoMove software control panel.4. To monitor the status of motor speed and thermal state on SoMove software.5. To export the graph of parameters recorded using SoMove software. support my channel by LIKE and SUBSCRIBE to continue these tutorial.ThanksSana ur Rahman
  3. 1747-NI8 Open Circuit

    I have an 8 point analog input card on a rack with a SLC 5/04 CPU.  It has been in operation for 20 years or so.  There have been some power problems at site lately and ever since they fixed them I have been having issues with 3 of the 4-20mA circuits on this card showing open circuit.  I have had my meter on them when they show open circuit.  The signal reads 3.96mA, just below the 4mA minimum and boom, the machine goes down.  Is there a way to adjust this tolerance??  I don't think there is anything wrong with the 3 transmitters so the error is just a nuisance.
  4. Allen bradley Micro850

    Hello, I am new to automation and I do a project with a Micro850 Plc. I am more comfortable with logic block so I write my program in Function Block langage on Connected Component Workbench software version 12. I would like to make flashing a light but I don't know wich block to use and how to program it ... Could you help me. Thank you
  5. Hi guys, I'm in another project with another brand on PLC and this time I thick I hit a pretty solid wall. Long story short, I need to change a -10 +10v signal send to a DC motor drive based on a "recipe" selected with a 10 positions camswitch. I've never programmed schneider PLC, except the zélio one who are pretty simple to understand. Apparently Modicon are much more complex to program with the knowledge I have. Is there documentation available somewhere I can use to understand how to code analog output.
  6. Hey there forum guru's!!! I am trying to read through the manuals for an NX-HAD401 High Speed Analog Input Card.  It is not very clear as to where you assign your variable in order to grab a channels analog input value.  Can you point me in the right direction? I am thinking it is in the "Analog Input Values 1 to 10" and if so why is it set up as an array?  Is it because it takes the average of the samplings and uses the result as the channels input value? I am sure I will have more questions but this may clear up a few.
  7. Omron PrograMming console

    Dear sir, my Omron plc output relay broken.i need to move this output to another output relay.then,i need to modify the i edit the broken output number to another output number by using programming console??? Thanks Kong Fah.
  8. FINS Communication with C++

    Hi, I'm having a little trouble connecting to a PLC from my program. I thought my previous post a few months ago fixed it, but apparently it did not do much. Here is my code: And here is the resulting reply from the PLC after converting it to hexadecimal So far, I've narrowed it down to the issue that my program is sending 64 instead of the 18 that was specified by the FINS command. I assume that the received error is due to the fact that the PLC did not receive the correct instructions from my program. The "End" is not sent by the PLC, it is a personal note for me to know where the received message ends. My goal is to simply receive signals from D00 to D68. I imagine that the received string should be in the form of: 00 C0 00 02 01 01 00 01 00 00 01 01 [Response Code] [Data] Can someone help point out where I can start looking for why my program is sending 64 instead of 18? I do think I am messing up something simple here, but I'm not sure where to start. EDIT: To clarify the models, I am connecting over Ethernet to an Omron CP1L-M40EDT with CP1W-CIF41 Thank you in advance!
  9. Delta PLC Analog Wiring

    Good day all, I recently working an assignment to read analog data from sensors. I connected everything just as what the manual for sensor stated. My PLC is DVP20SX2 and the sensor data i want is 4-20mA. The analog sensor has two wires, Analog Output + and Analog Output GND. I connected the + to I0+ and the GND to the VI0-, but when I work online using the ISPSoft, I can't get any data. My doubt is the wiring. Can anyone guide me on this? Is my wiring wrong? does analog works the same as digital, where we have to connect to same COM?
  10. Hi!Are you tired of skimming through menu bar items in TIA Portal in order to finally find that one command that you were looking for?So was I!So I´ve composed a handy one-page list of keyboard shortcuts to execute those commands in no time (FACT - 99% of them are executed using your left pinky and your left/right index finger ). Check out the list of keyboards shortcuts in the PDF attached below.For more practical tips and tricks on TIA Portal PLC programming -> go and have a look at my video course by clicking on the link below:   Keyboard Shortcuts.pdf
  11. Hello everyone, As the title suggests I am trying to display on a GOT1000 the real time frequency that the inverter is running at. I have attached my CC-Link settings and the associated programming as well. I tried using the example program from Mitsubishi but I got lost. From my understanding I should be seeing the output frequency in W3C4 however, I am not receiving any data. Any help would be appreciated. 
  12. PLC programming languages are used to program the automation devices in the industrial field. The device connect through PLCs can perform certain tasks like moving products or sorting them. The 5 most popular PLC Programing languages nowadays are all part of International Electrotechnical Commission Section 61131-3 Standard. IEC Standard is a set of rules that standardize PLC languages. The PLC programming language can be divided into two section: text-based and graphical.   Text-based Languages: Instruction List (IL) Structured Text (ST) Graphical Languages: Ladder Logic Diagram (LLD) Sequential Function Charts (SFC) Function Block Diagram (FBD)   Five Popular PLC Programming Languages You Need to Know
  13. IC200ALG264 Analog Input module

    Hello all, Thanks for the forum which has provided me with a lot of help overtime. I'm posting my first thread since I can't seem to find an answer to my issue. I'll quickly explain the situation: I'll be installing a RTD sensor to a GE Fanuc IC200ALG264 analog input module using a 4-20mA converter. Everything is fine except I can't seem to understand the polarities of the Fanuc inputs. I'll explain better: the module has an IC200CHS022 for the terminals, 15 terminals total, and the manual is reporting a "number" and a "connection" for each terminal. Now, the "number" seems to correspond to the visible pin of the terminal. But the positive and negative symbols are represented on the "connection", which I can't seem to wrap my head around what it means. Attached are abstracts from the manual and a photo of the terminals. Please tell me where to connect positive and negative outputs of the 4-20mA converter. Thank you. Terminals Table Terminals drawing Terminals photo (front)
  14. Hi guys, since this is a forum for people starting out with TIA Portal, I would like to share with you my course that I developed for the last 6 months.  This course uses a real-life sample application and translates it into a fully functional TIA Portal PLC application.  This course of 2,5 hours consists mainly of video explanations with practical programming assignments to put your newly gained knowledge straight to work.  As a controls engineer, I have over 10 years of hands-on experience with TIA Portal ranging from software development, commissioning and troubleshooting. At the end of this course, you´ll be able to: Structure and program a real-life user application in TIA Portal Download and Troubleshoot a TIA PLC application Program function blocks (FB) using ladder logic Build global data structures using user-defined-data-types (UDT) and data blocks (DB) With the coupon link below, you can enrol for only $12.99 (might vary depending on the country you live in).  The course is normally $99.99, so you get an amazing all-round programming package for almost no money.  So go and check it out  Take me to the Course Now!      
  15. Did you always wanted to get started with Siemens TIA Portal programming, but you were never sure where to start or how to get the best performance out of the platform? Eager to upgrade your TIA skillset from an instructor with over 10 years of TIA experience in the field?   -> Then this course might be just for you! My course "Siemens TIA Portal - PLC Programming Basics" will take you through the steps of creating your very first TIA application - from structuring (very important!) and programming your application, to downloading and troubleshooting your application online.  The course is based on video lectures and is around 2.5 hours long, and consists of 40 lectures divided over 6 main chapters. The enrolment fee is offered at a huge discount at the moment, so take action while it lasts! Take me to the TIA Portal course, I´d like to check it out...   Thank you, and I hope to see you inside the course! Hans
  16. Hello! I am new at PLC programming. I am using TM221CE16R PLC with TM3AI8 analog input module and SoMachine Basic v1.6. I am trying to scale analog input value. I am using 4-20 mA pressure sensor. I managed my wiring so that I get raw values in SoMachine Basic. But I don't know how to scale these values to usable values. My sensor works in range 0 - 16 bar. What is best way to get values? Is it PID function block or multioperand function block using equations to get range 0 - 16? I will appreciate your help.   Thanks in advance!
  17. Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale   Condition is Used   This is a Siemens Field PG for PLC Programming.   Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :-   The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics)    Has Step 7 and Step 5 installed   Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much)   In very good overall condition, a few light marks but that's about it, still looks very good.   Comes with the original branded rucksack    This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine   Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately   I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.
  18. rc01cpu and r60da4 help needed

    Hi every body, could you please help me; i have a mitsubishi plc serie iq-rwith the followings modules:powersupply r61p, r01cpu , rx40c7 inputs , ry10r2 outputs , r60adv8 analoginputs and r60da4 analog outputs. i am newbe with mitsubishi plc ;i would like to learn using the analog output of the R60DA4.for exemple i would send a digital value to the ch1 and convert it a voltage that i can mesure on the output of channel1.i have tried but i didn't succeed.i am using gxwork3.i have configured channel1 as +10v -10v output, normal mode , normal output;then i made a simple program in sfc to try this conversion but i get nothing in the output of channel1. i found that the digital value should be sent to the adress D11 wich is the adress of you will find the file i made with gxworks3.could you please help me. ANALOGOUTPUTSCF.gx3
  19. PID Loop Review

    Hi all, I am trying to set up a PID loop for a project I'm working on, and I was hoping someone could take a look at it for me. Most of what is written comes from the Q, L programming manual, but I've changed a few things so that the program can write changes to the SV as needed. The processor is a Q03UDE and the Analog Module is a Q64AD2DA, using only channels 1 and 5. Thanks for looking! PID Project.gxw
  20. GX works 3 fx5 4ad help

    Hi all, I'm trying to set up the analog on channel 1 of the fx5-4ad module. I've set my parameters but I'm wondering if anyone has an example of the ladder side in GX works 3. I'm looking to read the signal in an hmi. Thanks 
  21. Version 4


    MX Component manual for programming PC - PLC software solutions.   Details MX Component library functions and examples. 
  22. MX Component Programming Manual View File MX Component manual for programming PC - PLC software solutions.   Details MX Component library functions and examples.  Submitter WattUp Submitted 03/13/20 Category Manuals, Tutorials
  23. CS1D Programming

    Hi dears, I'm programming CS1D omron PLC, I created one project but in project tree i dont have function block section. when i change the cpu to CJ1 for example function block section will be add. how can i add function block to CS1D in my project? thanks.
  24. Hi Friends,            I am in a requirement to control huge nearly 300 channels Analog in a system. That is through PLC i  need to give a Voltage output for 250 channels. Which Configuration will suitable for this requirement.        Is it possible?    Any difficult is their in controlling this much Analog output in PLC?   Kindly advice me..  
  25. Analog range

    CP1L-L14DRD CP1W-AD041 I have my configuration words set to #80BB for both output words with the intention of having 0-10 input. With my input voltage at 5.25 I get 6300 the maximum range. I entered the bit wise in my calculator 1000000011011101 and it converts to 80DD. Tried both those options with the same result. Can anyone shed some light on what the problem is?