Search the Community

Showing results for tags 'rockwell controller'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 71 results

  1. UNABLE TO MAKE CONNECTION

    TRENDS ARE NOT SHOWING ON MY FTVIEW SE V8 . AS DATALOG MODEL STARTS IT SHOWS UNABLE TO MAKE CONNECTION IN DIAGNOSTIC VIEWER .  YOU CAN CHECK THE SCREENSHOT FOR THE SAME . I THINK DATALOG MODEL IS NOT ABLE TO CONNECT TO SQL DATABASE . WHAT MIGHT BE THE PROBLEM ? Please Help Guys .....
  2. Can anyone explain to me what this would mean in a COP instruction? Source: #N[N187:4]:[N187:5] Dest: #N[N187:1]:0 Length: 20 I am doing a PLC5 conversion to rslogix5000 and some (most) of it has been a nightmare -.-
  3. Hello Engineers, I  am Will from Levetop semiconductor. Our main product is LCD/TFT graphic controller. Support 8/16-bits MCU parallel interfaces, and SPI, I2C serial interfaces Built-in Ggeometric Drawing Engine: provide Point Drawing, Line Drawing, Curve Drawing, Ellipse, Triangle, Rectangle, Rounded Rectangle Drawing Built-in 2D Graphics Processing Unit: provide Magic Rotation, Reflect, PIP (Picture in Picture), Hybrid Graphics and Transparent Display Built-in 128Mbit Display Memory Support 16/18bits RGB type TFT Panel from 320*240  QVGA to 1280*1024 SXGA Built-in Standard ISO/IEC 8859 Fonts Built-in Two 16-bits PWM Timer Support SPI and I2C Master Interface Three Power Saving Modes: Standby,Suspend and Sleep mode Package: 128pin LQFP We have STM32/ST51C demo code open for developers, function libarary and Arduino Library available, too. Our product P/N as follow: LT7681   640*480   8/16bits/SPI/I2C LT7683+  1024*600    8/16bits/SPI/I2C LT7686   1280*1024  8/16bits/SPI/I2C LT7680A  640*480   SPI/I2C LT7680B  800*600   SPI/I2C LT7680+  1280*1024  SPI/I2C any questions, feel free to contact us   www.levetop.tw/en
  4. Dear automation friends,   I just like to put some issue in the clear that I have seen no reported issues on yet, but it is killing me. Maybe some other people in the world also have this issue. We use Windows 2016 on FT View v10. All patched with all compatible patches (both Windows and Rockwell). We install this software a lot but we only got this issue seen/reported on windows 2016. I never had a Rockwell issue that took so long without getting it fixed. Support is also not really helping.   We just have a setup of Windows 2016 with 2x redundant FT View Servers and about 10x Clients with each 4x screens. The HMI clients run perfectly but every few days, 1 application (on 1 of the 4 screens) just crashes "DisplayClient.exe application crash...". That closes the HMI interface and then the users needs to click on the hmi.cli file to launch that screen again. Refering to ntdll.dll in the windows events. No additional info except for the windows error reporting that is unable to contact the internet to send the crash report. Looking in the FT Diagnostics, it happens while the operator is operating the hmi screen. Not when there is no activity.   We reinstalled 1 client completely from scratch, including the OS, domain integration, everything brandnew. And 10 hours later: crash on 1 of the 4x screens. In a control room with almost 30 screens, this is very annoying and unacceptable.   If you have a similar issue or got the issue fixed, please let me know. If you have a similar issue and don't have it fixed, we can share more detailed logs.   Best Regards,
  5. Please could you assist with the software required to download data tables from 4 off DIRIS A10 Multifunction Meters into TM221CE40R Logic Controller via TMC2SL1 Comms Cartridge using Modbus Protocol over RS485. I have downloaded the Modbus tables from Socomec but not sure how to get these into the PLC. I would really appreciate your help in achieving this. I am using EcoStruxure Machine Expert - Basic to program the PLC & DAQ Factory Developer Release for my Touchscreen. Link to Socomec Modbus tables: https://www.socomec.com/files/live/sites/systemsite/files/SCP/6_gestion_energie/diris/diris_a10/DIRIS-A-10_COMMUNICATION-TABLE_2018-01_DCG01013_MULTI.html#General
  6. Omron_control

    Version 1.0.0

    93 downloads

    New app developed - Omron_control for connection Android smartphone and OMRON controllers.
  7. View File Omron_control New app developed - Omron_control for connection Android smartphone and OMRON controllers. Submitter sasha Submitted 08/17/19 Category Utilities
  8. CompactLogix E/IP to Kuka KRC 4

    Hello everyone,   I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ?
  9. Hi all I have a project where i am building a bread softness tester.  To do this i am using a smc electric actuator and an A&D scale. The electric actuator will push down on a slice onto an A&D scale.  A micro830 plc is then reading the data from the scale and storing the real variable in an array 80values long.  I would like to display on the hmi (panelview800) the peak/maximum value in the array. I am struggling on how to do this though and have not found much information online. any help would be much appreciated Thanks in advance Trevor
  10. Please help find a controller. We require a controller for 8 nema 23 stepper motors. Must have pulse direction and at least 8 axis or more (16 would be nice). Must have kinematics for linear and circular motion. Must be able to use gcode such as G01 X10 Y10 Z10 A10 B10 C10 U10 V10. Must have axis parameters for all 8 axis eg velocity, rotations, etc. We also need the drivers. Must be reasonably priced under $1000 or so. We found Dynomotion KFLOP which can do 6 axis and we kind of made it work for 8 axis. It is super cheap at around $250 plus KStep drivers so under $1000 total with free software, unfortunately, it can not do kinematics for 8 axis. 
  11. Hi everybody I have a elau c400 controller trying to connect it to a mc-4 pacdrive. But I realized that the wd led on my c400 is on and it can be a fetal error. Anybody has this experience? Regards.
  12. i want to connect omron vision controller fh l550 with Soft PLC (IPC) from Siemens  through Ethernet or  RS232c interfaces, should i use a unit for the communication or can i directly connect the Omron Controller with IPC ?  the IPC is connected with other devices via profibus .
  13. Mitsubishi PID controller design help

    Dear all, I need help in design of PID controller in Mitsubishi PLC fx3u, I what should be parameters for initial, and how to start and stop auto tuning.
  14. I keep getting a 404 whenever I try downloading anything. Is anyone else having this problem? 
  15. Hi Everyone. I need help bad. For some reason the RSLinx Classic on my computer was not working. I decided to re-install it but could not do that. Then I uninstalled it  but would not. I reinstalled all others but RSLinx would not. I cleaned the registry and again did not succeed either to install or uninstall. Does anybody have an idea what is going on? Please help. Thanks.
  16. controllogix and 500 on IPAD

    Hi, Is it possible to get RS5000 or slc 500 software on an ipad to fault find and troubleshoot or even make edits.
  17. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?
  18. Hello everyone, Working in Automation for the first time as a Co-op student so i'm fairly new to PLC's and the Automation field in general. I've recently been tasked with converting a RSlogix 5 program from an old PLC 5 project into a Studio5000 project. I referenced the manual (I'll attach link below), and had no issues using the RSlogix Project Migrator tool that I downloaded off the Rockwell website. My problem is that once I convert the program, my I/O tags that were originally sequenced in octets(0-7, 10-17, 20-27, ...) from the RSlogix 5 program, are switched into a sequential scheme in Studio5000 that just increments them in order (1, 2, 3, 4, ...). I hope this make sense, but basically the first seven tags match between the projects, but then I:010 in rslogix 5 is equivalent to I[8] in 5000, I:011 is I[9], and so on and so forth. Has anyone had this issue before and found a way to have Studio5000 keep the original octet scheme? I don't see this normally being an issue, but the customer has specifically asked that the I/O tag names be kept the same as the original program. Thanks for any help. - Ben   Converting PLC-5 reference manual link: https://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1756-rm085_-en-p.pdf
  19. RSLogix 5000 Code Generation using C#

    I put together a demo of the c# library I am working on for Rockwell PLC. It basically allows you to parse/construct the L5X files for code generation, documentation, and other uses. https://www.youtube.com/watch?v=kV0nXSyM7Gg
  20. Pls help set up QD75P4N

    Good day sirs,  i am a newbie at this motion controller setting. I would kindly like to ask for an assistance from all of you. i copied all the necessary data that i have on this project. I installed the wiring correctly i am able to Jog the servo motor. But when i try to Jog the motor Using GXWorks 2 i wasn't able to do so because its not showing any movement on the Mr J4 and the motor it self. is there any settings that i should have change? thank you for the time if you will need any information i am willing to give it thank you   I have also attached the GXworks program and the servo conifiguration   Please help me thank you project 1.gxw Servo 1.mrc2
  21. Square Wave Problem With Micrologix

    Hello all, this is my first post. I am using an AB Micrologix 1400 (1766-L32BXB Ser C FW 21). I was trying to generate a pulse train using the PTO instruction. I have modified PTOX funct. file. The ladder is just a simple XIO followed by PTO, (The Quick Start ladder from 1766-RM001). When I looked at the output waveform on my oscilloscope, I noticed that it wasn't a square wave. I decided to run it at several different frequencies to see how the wave form would change. At 10Hz i got a square wave. As I increased the frequency the falling edge became sloped and almost horizontal. Is this how the output should behave? The data sheet indicates a max frequency of 100kHz, but at frequencies over 150 Hz. The wave form looks like the output of SMPS. 
  22. 1756-L55/A Controller

    Respected Friends, Good day. I face a serious issue please help me to fix the problem.  We have a 1756-L55/A controller with 1756/M13 A memory card. after 2 or 3 months the program washout and the LED status on the controller are following 1. RUN --- SOLID GREEN 2. I/O--- OFF 3. RS232 --- SOILD RED 4. OK --- SOLID RED 5. BAT-- OFF 6. FORCE-- OFF  At that time CONTROL NET MODULES OK Light for Chanel A and Chanel B are also blinking and communication not established via control net and serial port AB-DF1. I switched off the power supply and after 10 second again power up the controller then OK LED becomes solid green.  i download the program and its run fine. But the problem is still there. In the controller properties the major fault shows  TYPE 01 [ POWER UP FAULT] CODE 60 [NON RECOVERABLE FAULT] what are the possible reason for wash out the program from the memory?  At that time version 16.03 firmware installed and the rslogix program convert from version 10 to version 16.03.  Is 1756 L555/A with 1756/M13 A support the version 10 firmware? i ask because the original program is in version 10 if its supported then i update the firm ware and download the original program.   Hope you will help me in this issue. Regards
  23. Hello I have a scenario that's been bugging me for some time now. The scenario consists of a Micrologix 1400 that I need to control it's output from modbus/tcp. In detail what I really need is to be able to manipulate the O0:0 through modbus/tcp. The PLC would be the master and I would be the slave that triggers the connection to the master. I'm using a Modbus-Client on my PC and that should be the slave. Any idea as to how I can manage that? Currently I can send data to the master but everything is "stored" on B10 and I have no idea how I could write directly on O0. Thanks a bunch guys. PS: I'm borderline noob. 
  24. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.
  25. Hello I am  a Robot Programmer. Fortunately  I would be beginning the PLC Programmer Interview Process. From Initial CV Screening and first round of Interview. Screening was easier. But unfortunately I am not good with PLC tech questions apart from that is involved with Robot Programming. I need a few questions to judge whether the applicant is faking his experience or does he has the qualities. If any PLC Programmers can help me, It would be a great help for me.   Thank You