Search the Community
Showing results for tags 'read data'.
Found 123 results
-
Hi, data registers are getting full, because of extremely high speed pulsing is there any way , if the data value in register goes above the capacity of 32 bit register, it automatically attaches itself to next set of data registers so lets say if data was written in D10,D11 Upon reaching the limit, it goes to D10, D11, D12, D13 please share if there is an alternate way to do this
-
Hi, data registers are getting full, because of extremely high speed pulsing is there any way , if the data value in register goes above the capacity of 32 bit register, it automatically attaches itself to next set of data registers so lets say if data was written in D10,D11 Upon reaching the limit, it goes to D10, D11, D12, D13 please share if there is an alternate way to do this
-
Hi, I'm Jovel, I'm new to learning how to program PLC. Just want to learn how to use Omron Sysmac Studio . I have a question about the Data Type Data Type - Structure ( Offset Type - Offset Byte ) / Union I Don't Understand this 2 Data types and how going to use them, can anyone teach me and have a sample program? Thank you
-
Hi All I am trying to connect Cognex OPC Server with Mircrosoft SQL Server (SMSS). Do you have any idea how to do that? I couldn't find relevant information online.
-
Hello All, I have a GX Developer project folder file sent by the client. I am not able to open. It opens the GX Developer and says Failed to read the project file. The screen shot is attached. Also the the project is attached. Please help me to open the project. I am using GX Developer version 8.91V 显示器 综合测试.rar
-
I've always had this Allen-Bradley memory map taped on my wall in my office. It used to be handy to use, until I remembered al of the prefix letters for each data type. Now I am using Emerson (GE) the old proficy software now called PAC ME machine edition. Now I'm finding it's about impossible to find the data type list amongst the thousands of help files, videos, ect... it seems like a simple thing to find, but I'm not having any luck. They use I and Q for regular inputs & Outputs, but there are R files, M files, S files, N files, G files, ect.... this is old-school PLC software that doesn't use tag names. Is there a steadfast rule for each type, or can they be used for any type of data? Dazed and confused...
-
I have an old Panelview 800 in a system that consists of the PV, a Micro 850 and 10 Powerflex VFd's running conveyor motors. My problems started when one of the motors would not run. It seemed that the PLC was not sending the Run command or the Speed. The problem got worse as I was working on it when two others did the same thing. The current situation is that 8 of the VFD's are getting a Run command and 2 are getting a flickering command. All 10 are getting a 0.0Hz speed command. I connected to the equipment with my laptop and looked at the PLC program and the PV program. I found that in the PV program that all of the user input data, which consists of Motor Speed (Hz), Accel and Decel times and some other timer values for the timing of some conveyor starts and stops, where all gone, set at '0'. this equipment is several years old and predates my presence here. The PLC program seems to be running and passing the commands that it receives to the VFD's. The data is passed to the PLC via Global Variables. I've never encountered this particular problem before. Any ideas?
-
Hi, I have a problem with Omron PLC and Beckhoff IO. The IO just disconnects in a few minutes and comes back! I received different errors: Link off error, Illegal slave disconnection, process data reception timeout. When I also check "Display Diagnosis/Statistics information" I see errors on all ports A and B of all nodes. I have called and talked to both Beckhoff and Omron. I have two NX1 and one NJ101 to test. And I have three EP2318-0001. I have the same problem with all the PLCs and EP boxes. It does not matter if I have one, two, or three nodes. I have tried different revisions of the EP2xxx from the XML file, different settings for the slave, different task periods, and the error still is persisting.
-
Version 1.0.0
17 downloads
LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data. -
View File LOGO For Excel LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data. Submitter progpro Submitted 03/25/22 Category Demo Software
-
Currently have NX PLC setup as an OPC UA server and an OPC client setup and communicating. The issue is only tags that do not have a Data Type are showing up in the OPC client. I have 2 separate OPC softwares connected to this plc through OPC UA and both are having same issue. If I setup the OPC as a polling service, then all the tags show up as expected. Does anyone know if this is a known issue with Omron and their OPC UA server, or is there something that I am doing incorrectly (possibly a setting within Omron that I am not aware of)?
-
Does anyone have experience with the NE1A-SCUP02-EIP safety PLC? We had a machine shutdown yesterday with a L9n4 error on the NE1A unit. The manual says this is a tag data link error. Does this cause the safety PLC itself to shutdown? I always thought the EIP portion of the safety PLC was only used for status reporting to the PLC. The safety portion is strictly on DeviceNet and is independent of the EIP network. The CJ2 PLC's error log tells me it had problems communicating with the safety PLC, the VFD, and NX I/O's which were all in the same panel going through an Ethernet switch.
-
Function blocks without defining Inputs and Outputs data type
BrunoRamos posted a topic in NJ Series / Sysmac Studio
Hi, I have quite a noobie question. I want to create a function block to do some simple operations on 2 variables. Both variables are In/Outs (see picture attached). How can I make this function accept variables regardless of the data type? Given these is just simple math I am able to use the same instructions in REAL, INT, UINT, etc. But, the function block only lets me assign one Data Type to the In/Out variables. -
Hello, What would be the best data logger for Backhoff automation based automation? Idea is to record some analog and digital tags at certain time intervals. Present them in tabular as well as graphical form and print some reports based on selected time window. I have looked up TwinCAT Analytics and that seems to be one option. But want to check others before making decision.
-
hi everyone i have a question about nx ec0122 i connected an encoder to ec0122. now i want creat a programm for read the pulse and reset pulse. Then write a program to measure the length of a roll. How should I do this? Thank you for your help
-
NX1P2 data exchange with another Omron PLC
adamscott1982 posted a topic in NJ Series / Sysmac Studio
Hi gents, I need to build up a communication between nx1p2 to another omron plc (any type with sql support). This is due to the fact that I have finaly to prepare the plc communication with the sql database, and nx1p2 doesnt support this. Sorry, i know it's probably a noob question, but I'm a beginner. What type of technology i shoud use to make this connection between NX1P2 and another Omron PLC? Or might be some share some project? -
Hey guys, I know this is a topic that has been discussed before, but I am having trouble finding exactly what I am looking for.. I want to know the most efficient way to record data from my PLC to an Excel file on my PC. I want this to be done without the use of the PLC's webserver. Specifically I am trying to record vfd speed every 10seconds with a time and date stamp. How can I do this? Thanks, James
-
Limit RDP access to PanelView HMI to read only
Mr.Sovereign posted a topic in Allen Bradley / Rockwell Automation
Hello, On our DCS we have a button that will open an RDP connection to our PLC server and open the .mer file connecting the DCS to the PanelView HMI. This is supposed to be used for troubleshooting purposes only, but that is not the case. Is there a way to prevent operators from operating the HMI through the RDP while still allowing them to have read only access? Thanks, Michael -
Hi, I have inserted new RTD module into in my SLC500 as replacement to defected RTD module however the module LED is enabled but the channel LED's are blinking. I have checked the following: In the advanced I/O configuration the module configuration is shown as expected In the data file word format it is not corresponding to the channel preferences What should I do and how to fix the word bits?
-
Hi there! I have S7-1200 controller connected to a Comfort Panel. The machine has some pressure and temp sensors, as long as many valves and other stuff. I generate a daily datalog with some of those variables but, the thing is, I've been trying to figure out how to show these data in the HMI without using a trend viewer. I don't know if it's possible, but I want to be able to see what valves were open (for example) the day DD/MM/YYYY at HH:MM:SS, using the generated data log, kind of knowing the state of single bits at different past moments. I've been searching the web but I didn't find something exactly like this, don't know if I'm doing it properly so I'd like to know if you have done this or you can throw some light on the topic. Thanks in advance and hope you can help me!
-
Scenario: You show up on site and the only knowns are Omron PLC and EtherNet/IP network. You have a laptop loaded with CX-One, an ethernet cable, and the ethernet port that is connected to a known EtherNet/IP Omron network (you can not see the PLC). I have previously worked with Siemens systems and used Primary Setup Tool and Proneta with wonderful results. Do similar tools exist for an Omron environment? Question: How to (relatively quickly) scan an EtherNet/IP network for connected devices without knowing their ip addresses?
-
Omron NJ/NX to AB Ethernet/IP String Data type exchange
Brooksy posted a topic in NJ Series / Sysmac Studio
Have been able to exchange data types of BOOL, INT, DINT & REAL between Omron NJ/NX CPU with Allen Bradley Logix CPU's with Ethernet/IP using the CIPUCMMRead & CIPUCMMWrite instructions. I now have a need to exchange "STRING" variable types. Have tried varions string lengths in the NJ without sucsess. AB default string length is 82 & Omron 256 but I think the difference is the length headder that AB has with within their String Tag type. I know I could convert my strings to an array of bytes & sent them this way, but was looking for a solution to sent them as native strings. Hope someone out there has done this & can share their leg work? -
hello, im working with r04 mitsubishi plc with rj71c24-r4 in modbus rtu mode, i need to read and write PM1200 scheneider values, but i have problems, is my first time with this model and very different than fx5u model, i working in GX works3 someone who can guide me, I would appreciate it too much
-
Hi I'm trying to set up Modbus RTU communication between FX3U PLC and a weigh module. I would use the ADPRW command using 0X03 to read the 16 bit Holding Register but in the weigh module the Data Address/Holding Register of the value I want to get is 400047 - 400048. How to translate the value in 16 bit? Thanks, Fabio
-
Hello Im trying to read from my PLC but i cannot see the program file. However, if i try to compare it using other file program, i could see the program file. Is their any restriction in my software?
