Search the Community

Showing results for tags 'logo siemens compact logix network'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 296 results

  1. Tia Portal Program Upload Error

    Dear All i got this error when i upload program from plc to PC  then this error is shown. if i continue then TIA Portal Crashes. Kindly suggest me a solution .    PLC : Siemens 1200 Cable : MPI
  2. Hi all , I have been using MELSEC - Q series plc for the past two project i dont find any issue with that but for the third project  used same PLC same model but there is issue which I found unable to resolve  The issue is when i try to communicate PLC using LAN cable by direct ethernet connection it works normally but by communicating using HUB network I cannot communicate, I checked all the parameters setting, I dont know what is the issue even contacted mitshubshi service to troubleshoot but they are not responding  So here i am for your guidence to solve this issue   see the images below to analyse this issue This connection is direct ethernet connection which works normally    The parameters are set and writed to PLC The IP is set to my PC for communication  When i try to find the cpu in the network it shows the cpu IP  After that I checked for connection Test it show error I have also attached the Network route which i used to communicate  Network Drawing.pdf I hope someone will help me to solve this issue Thank you , madhan ravichandran
  3. Hello there, I have installed TIA Portal V16. There is a logic programming language called "Graph" in the siemens TIA Portal. This language is not installed by default in the TIA Portal. How to install that language Graph Language in TIA Portal ? Refer Images:-   https://we.tl/t-BF2PtDcd7W  
  4. hi, I'm trying to find out what kind of HMI panels can be used for a LOGO!8 ethernet plc. are panels from simens that can be used... they are a bit expensive  
  5. When installing and running SIMATIC Management Console, I am able to see all the computers on the current subnet and connected to the Management Console PC. When trying to add the Management Console pc to Network an error pops up saying: "A SIMATIC Management Console error occurred. Remedy: restart SIMATIC Management Console or restore data, or re-install SIMATIC Management Console." I have tried reinstalling Management Console and Management Agent several times and restarting the pc, but it still gives the same error. The version is V9.1 SP1 Update 3 and running on the latest version of PCS7. I have read the manual many times and checked everything such as user rights and services running, but nothing has fixed it. I have also noticed that SIMATIC Management Agent Configurator does not see Management Console and just has "-----" for where it should name the console. Any help or guidance would be appreciated, thank you!
  6. I currently have two NX1P2 PLCs communicating back and forth over ethernet IP. However, I am looking to expand this project across multiple PLCs and I need a way for one PLC to see all other PLCs that are connected to the LAN network via Ethernet IP. I can use the _EIP_EstbTargetSta[255] function which is a boolean value that returns true if there is an established connection  to a device where the last octet of the IP is specified in the array [255].  This function works well but my PLCs are configured with the subnet 255.255.0.0. And I need to see the connection status based on the third octet. Is there an existing function that I can use, or is there a way to view the full structured text for the _EIP_EstbTargetSta[255] function and modify it to suite my specific application? 
  7. I have a ne1a safety plc I am trying to get online with. I have Network configurator V3.74. I have installed the usb driver and it is connecting to the device. When it shows the network to connect to I click on it and get an error that says: File load was failed. The specified file is protected by user password. In order to use this file, you need to install the Network Configurator for CIP safety,  Anyone know of this software or upgrade? I didn't find it on the omron software listing. 
  8. TIA Portal for beginners

    If you learn more quickly after watching videos about PLC like reading the literature without example, then these videos can help you if you are a complete beginner. Enjoy it  (If this is against the rules of this site then sorry for spam  )   PLC:   1. How to create project in TIA Portal   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgUBs7nrNmq5ManYyQ-hvKK       2. Program blocks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlni7Uw9-lfs8UIykpuubF       3. Bit logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbitdaKvFJv9WZEOj7VrMf_0       4. Timer operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbiaWQL8lXja1_Kd1z-jeDXr       5. Counter operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgfyg2dwDiR7xzsaXtdI9xo       6. Comparator operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgs-WgOvePyRUKgnDBK-qfx       7. Math operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgInRxxraaX6RG5LUS8gcpM       8. Move operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjQQEXr_bhzjKvNCjBeS1Zw       9. Conversion operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsjfMUtVn3QQ6MJM7cBpTW       10. Program control operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgFtnxDkNZ7Amps67nr-KHX       11. Word logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbh6bGa9bgy6cJhVi-RhF0gH       12. Shift and rotate instructions   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlUnK9ECCKUccqt91Qsw6e   HMI:   1.       Beginning with HMI devices   https://youtu.be/EF4Qprf0Mn8   2.       Basic work with screens   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgPAApJCAGcPZOHViTAT9C1   3.       Basic screen objects           4.    Elements objects   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgOSznFb03Rr_St-2WFcygo         5.       HMI Alarms   https://www.youtube.com/playlist?list=PLqYtPgi-xbbi_V7XENgupV7HFjOJI7Yes   6.       User administration   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgDP9dfAOkW3eodC5aH0kmR         7.       Scheduled tasks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsaMlovHL2BDrju8kKgkZi     OTHER: Siemens PLC - Hardware configuration (SIMATIC S7-300) https://youtu.be/WVkAGKsxftw     Siemens HMI/PLC - communication (Basic Example) https://youtu.be/AcN50TShHgY   Siemens PLC - Firmware upgrade/downgrade via TIA Portal https://youtu.be/qEsS7RR7QIw   Siemens HMI/PLC - Recipes (Basic Example 1/2) https://youtu.be/wLmH-QT3T9U   Siemens HMI/PLC - Recipes (Basic Example 2/2) https://youtu.be/_2K6l7dYuqY   Siemens PLC - Upload program from PLC to TIA portal (PC) https://youtu.be/igw-4CxjnLw   Siemens PLC - Add and install GSD file in TIA Portal https://youtu.be/LJKUzv3Zykw   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 1/2) https://youtu.be/WCpiej4S8-U   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 2/2) https://youtu.be/xl4pxLK0CDY   Siemens PLC - Scaling/Converting Analog Input/Output (0-20mA to 4-20mA and vice versa) https://youtu.be/BOjFlhAwO0k   Siemens HMI/PLC - Linear scaling of HMI Tag (PLC/HMI tag scaling) https://youtu.be/XBUknb3JDfE   Siemens HMI - Changing of Date/Time format (12/24 hours format) https://youtu.be/bCVKFrLwzWA   Siemens PLC - Configuring and commissioning of SIRIUS ACT (PROFINET IO) https://youtu.be/yIW6kta34_s   and more...      
  9. Hi everyone, I have a question for you all, Is possible to configure CJ2M-CPU11 with tags trough network configurator to connect Control Logix PLC using EthernetIP? I did a configuration with CJ2M-CPU31 and Control Logix PLC with no problem, but now I need to communicate CJ2M-CPU11 with Control Logix PLC using EthernetIP. Some of you did this configuration between this two PLC before? Regards!
  10. Dear all, I'd like to get your support on the issue with OPC UA certificate. My OPC UA server has been built with Node.js. The PLC S7-1500 (firmware v2.9) acts as OPC UA client. It's working well without certificate but when I use certificate, there are 2 situations: 1. When connecting using "Online access" (as attachment) in the "OPCUA Communication >> Client interfaces", I can connect with certificate (after I export and copy the PLC's certificate to the trusted folder of the server). --> server is ok. 2. When coding and running with real PLC: can't connect, there is even no PLC's certificate on the rejected folder of the server and there is no any error, the Status of block "OPC UA Connect DB" is still 16#0000_0000. So, what I did with certificate in TIA Portal (V17) are: - Enable the Global security setting for certificate manager - Created (and tested) with both self-signed certificate and CA certificate for PLC - Added server's certificate to trusted list in "Certificate manager" of TIA Portal (also added to the "Certificate of the partner devices" in  Device config) - In "OPCUA Communication >> Client interfaces", chose the Security Mode/Policy and PLC's certificate (already tried with and without this setting) In my point of view, the problem is that the PLC received the certificate but somehow it didn't read correctly or didn't compare with the certificate in the trusted list because if the PLC does this step, it should send its certificate to (the rejected folder of) server. Could anyone help me to solve this issue? Thank you in advance.   [Update] 1.The PLC throw the error code 16#8016_0000 (BadCertificateHostNameInvalid/The HostName used to connect to a Server does not match a HostName in the Certificate - as I searched in google) but it's very quick so I could not see this behavior at the beginning. 2. I have tested with UA Expert, I can connect without any problem/warning. So, the high confidence that problem comes from PLC. ----------  Best regards, Danh Vo
  11. Export/Import PDL WinCC

    Hi all, Do you know a way to export/import the graphics screens (PDL) from a human understandable language (XML, CSV, JSON, etc)?? Thanks!
  12.  I've been debating whether to stay at my current employer who uses Emerson PAC software, vs going back to a similar company that uses Rockwell (compact/control logix) mainly because A-B is used by most companies around here. I work as a technical temp, usually 12 month contract jobs. Learning the Emerson PAC (aka Prophecy) seems to be a waste of time, since I am not aware of any companies that use it, other than my current employer. My placement company is pushing back, but I know I am correct. I do not have hard numbers, but I've been around the industry for 20+ yers, and have only seen 1 company use Emerson.   Does any one agree or disagree, or have some circumstantial evidence of the actual market share of A-B vs Emerson. I am mainly working in the Auto industry, in Michigan. Just looking at this site, there are 3200 postings for GE and Emerson combined, vs 58,000 postings for A-B. 
  13. Hi there,  I'm downscaling my business in Western Canada and have some legit software licenses I'm going to sell. This was my first thought as to where I might explore selling/transferring licenses, but I'm also open to polite suggestions.  I have: one Studio 5000 Full Edition ESD Software (9324-RLD600ENE) (software & valid license) two Siemens TIA portal software packages & licenses with Step7 v14sp1 and WinCC Comfort Advanced V14sp1 (software & USB dongles) an unused Simatic WinCC SmartServer license (software & USB dongle) one Progea Movicon 11 Scada/HMI developer license (software & USB dongle) one Progea Movicon NExT DEV3-FL (developer license) (software & USB dongle) an unused Progea Movicon NExT Scada license (RTCS3-F-1K+WB3-1K) for site install (software & USB *unused) one package of Schneider Movicon with license (Vijeo Designer, Unity Pro S, and SoMachine) (software & USB keys) Thanks! Mark
  14. Been seeing a high failure rate on these PLC's on 2 of our processes. The control power is feed through a APC UPS to a 24VDC power supply to power the unit. Getting a hard fault where the OK LED comes on red and stays red. It never sequences through all the LED on power up. Tried the hard boot by holding in the reset button and applying power. Has anyone on else seen a high failure rate on this model PLC? TIA..
  15. Morning all, first off, when it comes to controls I’m pretty green so please bear with me.  I have a bunch of old Modicon TSX Compact plc controllers. Some of them have randomly stopped controlling the outputs, I replaced the output card (module? I don’t know what to call it), but no change. I don’t know if the program is messed up, or the main board or something else. I want to read the plc but don’t have and can’t find the software to do so. Any suggestions is greatly appreciated. 
  16. Please let us know if anyone needs to have their Siemens Moore Mycro controller repaired. We can repair these for you depending on the model. 352EA21NNF, 352EA21N1F, 352BA etc. We can also repair the power supplies that go with them and can upgrade the unit from B level to C level software. If you would like a free quote please contact us at customerservice@OttoAutomation.com  or visit us at www.OttoAutomation.com. All repairs come with a full 1-Year warranty and also include a complete refurbishment and testing to extend your units life cycle. Any member of this site will also get a twenty percent discount on these units. Thank you, Otto Automation
  17. Change Subnet On CP1L PLC

    I am trying to change the subnet of this CP1L plc. Currently it is at 192.168.250.*** and I would like to change it to 192.168.54.***. I already tried starting fresh by writing to the controller with ip 0.0.0.0 and then putting my desired ip address after. When I try to write to the controller with a subnet other than .250 for example 192.168.54.13, the controller saves the node address(.13) but keeps the same .250 subnet which results in me being able to ping 192.168.250.13 successfully but get no response from pinging 192.168.54.13. Yes I did change my local network card when pinging different subnets and also did a network reset in CX-P after every ip change. Let me know if there is anything I am missing!! 
  18. We have just moved our facility and we have discovered a box of Siemens parts (and a few random other signal converters etc). I've attached a list of parts if anyone is interested, they are all all new in the box. We'd be interested in selling at a very fair value, reach out if you're interested. Also if you know of a good surplus place to sell the lot to please let me know.  Siemens Inventory.pdf
  19. Hi,I am running a Windows 10 VM with Rockwell Studio 5000 on a Windows 10 host PC. I communicate to the PLC network through a USB-C to ethernet adapter. Occasionally, the communications drop out, if this happens the only way I can re-establish comms, is to shutdown the VM and restore defaults in the virtual network editor, as this can happens a few times each day, it can be very frustrating.When this happens I cannot ping the host either, until the defaults are restored and the VM re-started.I am using the bridged connection in the VM.Can anyone help with this?Thank you
  20. Currently have a A1SJ71E71-B2-S3 in the system for coaxial (thin) ethernet (10BASE-2), it's connected to a conversion module for TP-cable and from that then to a PC with plain TP network card.  I was thinking about getting an A1SJ71E71N3-T to replace it and that way get rid of the converter from coax to TP. I wonder if it's possible to just have it hooked directly to the computer without hub - if I need a hub there's really no point in swapping - as there's still another thing between the computer and the PLC system that can cause problems. I was looking through the manual at mitsubiSIH.com and they seem to think they are connected to large nets with a bunch of hubs, PLC systems and computers. Appreciate thoughts and help. 
  21. Hi, First of all, thanks in advance for those who support and advises. I have a Modbus/TCP operational network as shown below. However, at any 1 time only 1 LAN is able to communicate instead of both LAN networks of the device. In another system with S.E Premium Unity PLC, both LAN networks are able to communicate at the same time. Thus, I would like to enquire if this is a limitation of Quantum NOE 771 whereby only 1 LAN can communicate at any one time or whether I have missed out any parameter/configuration settings? Any issue on the IP address configurations? Please advise. Thank you very much for the advise and assistance.
  22. Hi, I need help finding the length of a string.  I am using an In-sight 9000 series camera with a compact logix 5380 and communicating over ethernet. Unfortunately, the string length is not provided in the AOP, and the barcode length will constantly change. I told to use the FSC instruction, but I cannot get it to work. Thanks 
  23. LOGO For Excel

    Version 1.0.0

    22 downloads

    LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data.
  24. View File LOGO For Excel LOGO For Excel allows you to retrieve, view, log and write data to one or more Siemens LAN connected LOGO! 8 basic modules using Microsoft Excel without the need of a touchpanel or any other hardware or driver. Configure in no time Excel spreadsheets that contains live LOGO! data. Submitter progpro Submitted 03/25/22 Category Demo Software
  25. New in box Siemens KSBLBDB circuit breaker sub-kit S5/SWBD OEM BUS SUB-KIT, BL/BQD 12-D-5649-05 For BL and BDQ breakers in a P5 panel. Quantity 60 available, all new in box. Some boxes have cosmetic shipping damage. Other Siemens PLC / HMI equipment available, a few OP070, ET200S modules, touchscreen IPCs, CPU200.   PM with your contact info to make arrangements.