Search the Community

Showing results for tags 'data matching software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 145 results

  1. Mitsubishi

    i want mitsubishi plc programming software gt works 2 basic version
  2. Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS  
  3. Hi. I need to troubleshoot a Modicon TSX Momentum 170ISP00100 Weighing Module. This hardware was discontinued by Modicon a few years ago. Does anybody have the configuration/runtime software for this module? Any help would be appreciated. Thanks in advance
  4. Anyone possibly have software for the Mitsubishi Positioning module AD71 (SW0IX-AD71PE) ? It's a servo positioning module for A Series PLCs that can either be programmed by an old programming terminal or a DOS based program for PC. I think SW1IVD-AD71P could also workReally hoping to find the any compatible software for this controller. Maybe someone has leads?
  5. CompactLogixL24ER

    Dear Experts Request to let me know in case it is possible to get communication software to communicate with CompactLogixL24ER. As per my understanding Rs Logix Studio 5000 is needed , version number required is V21.000 Thanks and Regards
  6. password unlock tool

     hi everyone i m traying to   write to plc  a program and getting this message then program is not downloading to plc   'there is a device in the program (main) that is outside of the range  check the program and currect the device that outside of the  range ' I m using mitsubishi fx3ga-60mt  plc. please suggest me about it .                              thank you     hello everyone please let me know about  how to make software  tool for password read from Mitsubishi,delta, omron, siemens plc .                             thank you       
  7. Messung PLC

    Dear Friends, I want Dox mini software for messung plc, i had search in messung dealers in various place, but not available. <edited> Thanks  Boominathan.K
  8. NB Data log

    Hi there!  I need to implement a data logging that saves the log in a USB storage for a machine and just started searching for some info about data logging in NB HMIs. Up to now I'm clear about using the Data History function and the sampling method I'll be using but I still have some unclarified doubts about this. 1.- The data log should sample the value of, let's say, a couple of words, each second for an entire day (6:00 am to 6:00 am). NB's manual doesn't say a lot about Storage Type and Buffer Storage in "Save Data History" tab. Does "daily file" mean It deletes the .CSV file daily and it generates a new one? If is it, at what time does this occur? Does "single file" mean it generates a file and won't get deleted? Does this mean the sampling stops when completing the first one? Is "storage period" used to keep the file after the next log begins? 2.- Is it necessary to display the element in order to make the log work? Or can it be placed in a random screen you only enter once a day? 3.- In the "Channel Properties" tab. If I need to get the binary value of a word, do I need to set the max. limit to 65535? 4.- I asume that "Sample points" value doesn't matter when selecting Continue sample mode. Am I right? Thanks in advance, any help is appreciated.  
  9. Data Logging with GT Designer3

    Hello, I am trying to log data using GT Designer 3 and I'm having no luck. I found some sort of online documentation and even going through the myriad of steps still find my self unable to log anything. I am using the melsoft project navigator and GX Works 2 to simulate the logging of just one 16 bit signed word with a constant value. As logging data is clearly not as simple as just specifying D100 or D200 as the devices you want to log, I am hoping someone else on here has some experience on this matter and can help me out.  Thanks for any help in advance.
  10. Hello Friends,This video guide you about the programming of Schneider Altivar 312 VFD using SoMove software. From this video you can learn about1. Using SoMove software to program the Altivar 312 series VFD.2. To control the induction motor using control terminals of ATV312.3. To control the induction motor using the SoMove software control panel.4. To monitor the status of motor speed and thermal state on SoMove software.5. To export the graph of parameters recorded using SoMove software.https://www.youtube.com/watch?v=GgUKymi3uwAPlease support my channel by LIKE and SUBSCRIBE to continue these tutorial.ThanksSana ur Rahman
  11. Dear Friends, I have made this video to show you how to take data samples from Delta DVP PLC and save this log file in the Weintek HMI internal memory. The Weintek HMI internal memory is easily accessible using ftp. All the necessary steps are mentioned in the video. The link of the video is given below,    
  12. MAM-KY02S

     kindly i need the plc software programmer for plc MAM-KY02S  and the cable connection data 
  13. Hi all, I am currently having a project of polling data from PLC CJ1M using Advantech ECU-1051 IoT gateway which support rs-232 serial connection (Host Link) to poll data from the PLC for data acquisition and monitoring, I would like to use peripheral port since rs-232c port is used for HMI. However, I am currently stuck at make the connection between those two devices. I did setup same transmission configuration between them (baudrate, Unit number, start/stop bits,...). Is there any configuration that I have missed to make the communication works?  
  14. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  15. Hi, I have an old TSX 47 30 that has an I / O fault (red led on) green led on run and plc stopped. I'm writing to see if you can help me to establish communication and achieve the download of the program. I do not have the communication cable or the PL7-3 software under OS 2. So far I have done searches on the schneider page, forums and all the links are lost or deactivated. I have read your answers in plc of the same series and I observe that a converter rs 232 to current loop is needed. In this case here in Venezuela it is difficult to get this converter, however I have observed the black box model 232 CL-E, CL050A and I think it can be useful. I also have an old toshiba laptop with windows xp with a native rs 232 port to avoid another converter and I could make the connection cable DB25-DB9 to the PLC. Now I would miss the procedure to make an OS / 2 bios and get the software or make a virtual machine in which case I require the appropriate software .. thanks for your help
  16. Good day everyone, before I start asking my question, just want to let you all know that my knowledge with PLC is not that good. I'm still learning on how to do it. So currently I'm working on a project that trying to obtain data from Omron PLC. I was told that I can't touch the Omron PLC program or modify it. That Omron PLC is connected in an isolated network within a router. Other than adding Network Card on the device, can I use another PLC (any brands) to get the data from that Omron PLC through the router? The communication protocol using here is Ethernet. Can i just tapped into the network and take the data with that way? Or the other method I'm thinking is that, the Omron PLC will feed the data to a server, can I just obtain that data from server by using OPCUA? I heard there's some PLC that have the OPCUA function, I just make my PLC into the cilent and request the data of that Omron PLC from server through Ethernet. Is this possible? Please let me know whether my method works or not, thanks in advance guys!
  17. I'm editing an old program for a customer that has a zillion user-defined data types. Scrolling through the list trying to find a specific type definition is taking way too long. Is there and easy way to find a specific data type definition? It would help if I knew how to collapse the view so I don't have to scroll through each member of every type. There doesn't seem to be any right-click menu items that would collapse the view.
  18. Hi! I would like to ask how could I send data from PC to CJ1M PLC, by SCU-41 module and RS232 cable, in order to activate an actuator (LED)? In my environment, I have a sensor that sends data from PLC to PC (I'm checking data, "HelloWrld" with Putty), with this configuration: And I have another section where I want to read the data from the PC in ordr to activate a LED I would like when I send for example a letter 'a' trough Putty, the LED activates. How could I do that? Thank you very much!
  19. Hello, I'm using RSLogix 500 application for LAD programming. I would like to convert the float data type to integer data type and vice versa. I tried with the COP instruction as some had mentioned in other forums, but it was not working. So any suggestions on solving that issue would be helpful.
  20. I'm working on simple structured text program which takes in DWORD values, does some math on them and then outputs in DWORD type. What data type should I be using and how can I make this work?  This is one of the lines from the code(everything DWORD) and I get 'operator not supported by DWORD data type' XPos3 := XPos1 + (2*XIncrement);  
  21. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  22. Hi everyone! I have a question to all of you guys - do you ever use any software or online tools to manage your automation/electrical engineering projects? I have worked in a number of companies and have seen various scenarios, from using excel tables to run multi-million dollar projects to using proprietary SW for every little tiny project. Unfortunately I do not have experience working for any major big integrator and am very curious how projects are managed at this level (and if every engineer likes the way it is handled).  Additional question - does anyone have ever used a software to automatically generate the PLC code? I know some companies develop products to generate the "skeleton" of PLC program and I think it is a great thing to have.
  23. I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio).  I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT.  I have been told I should be able to do that, but it still does not work.  The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before?  It may be a setting I have not done right maybe?? Thanks,
  24. Cognex Data Logging

    Anyone know how I can create a log of results from a Cognex vision system?  I have 3 cameras that look at various thinks... clip presence, clip height, clip angle.  There are 2 clips per part and 6 parts per tool.  This makes it hard to zero in on what I areas I need to tweak. Thanks! P.S. I've heard that maybe their OPC Server could do this but I don't have much experience with it (actually I don't have a whole lot of vision experience at all).  From what I've briefly read, I just install the server, set up the tag within the server, start it, and I can just drag and drop the tags into an Excell cell?  If this is true, this just gives me another way to read the values.  How can I create a database or log of these tags?
  25. Hi all, I'm enhancing an Ethernet IP driver but only just learning the ropes in terms of Allen-Bradley PLCs. I'm presently focussing on that part of the driver which specifically supports SLC/500 & MicroLogix 1400, for which I have one controller of each type for testing purposes. I can already cater for a range of standard file types: integer, float, binary, input, output, string, counter, timer, control, status, and this is working well. However, by working with RSLogix500, I can see that there are other data file types which can be hosted in these controller types (dependent on model) and, indeed for test purposes, I have actually created instances of them as follows: ASCII (at A21, 20 elements) for both SLC & ML1400 Long (at L22, 10 elements) for ML1400 Message (at MG23, 8 elements) for ML1400 PID (at PD24, 4 elements) for ML1400 Programmable Limit Switch (at PLS25, 3 elements) for ML1400 Routing Info (at RI26, 3 elements) for ML1400 Extended Routing Info (at RIX27, 3 elements) for ML1400 Now, the driver obviously uses standard DF1 PCCC data types (see below) to read/write individual elements/sub-elements of the file types that I can already support -- and I can see that there's a file type listed below for ASCII. •80 to 83 hex: reserved •84 hex: status •85 hex: bit •86 hex: timer •87 hex: counter •88 hex: control •89 hex: integer •8A hex: floating point •8B hex: output logical by slot •8C hex: input logical by slot •8D hex: string •8E hex: ASCII •8F hex: BCD However, my question is this: since there are no hex file types corresponding to non-elementary data types such as L, MG, PID, PLS, RI and RIX, what file type do I specify in my DF1 PCCC packets to read/write the elements/sub-elements of these six data types ? Thanks in advance.