Search the Community
Showing results for tags 'cc-link c# servo'.
Found 165 results
-
Is there a real-time help resource for this thing other than the worthless AB site, on which the support page has been giving an error message for 2 weeks?
-
Hello everyone! I have problem with understanding the usage/principle of operation of parameter "Mark detection number". In manual i read: "The number of mark detections is stored. "0" clear is executed at power supply ON. Continuous detection mode: 0 to 65535 (Ring counter) Specified number of detection mode: 0 to 32 Ring buffer mode: 0 to (number of buffers - 1) Refresh cycle: At mark detection" My question is which mark detections are stored? Servo detects some kind of marks? I am novice in servo programming, please explain in the easiest way. Thanks for help.
-
Hello, I am using the R88M-1M40030T-BS2 ( 200V 3ph) servo motor. I am looking for a diagram that explains the connections on the top of motor ( for power supply).. there are more than 3 pins and i am not sure why. Can anyone help me understand the pins on the motor for the 3ph supply? Thank you
-
Posted 22 July · Report post Dear Friends, I want to set my servo controller overload setting as per my machine load requirement since all my servo installed in my machine over travelling and hitting trying to run continuously which is resulting servo failures ,repeated timing belt cut issues.Kindly help me resolve this issue.since i am not familiar with servo controllers.Model used A5 II minas servo MADKT 1507 and contol mode in position control setting.
-
Here is a link to a thread on a recent post showing how to communicate serially to an Omron PLC using VB.Net. This uses the Omron Host Link serial protocols. (C-Mode Commands) It will read 10 DM registers and display them on the form. http://accautomation.ca/implementing-the-omron-host-link-protocol-vb-net/ Here is the source program that can be downloaded. Other links: VB6 Program: http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ VBA Program: http://accautomation.ca/how-to-implement-the-omron-host-link-protocol-part-2-vba/ Regards, Garry www.accautomation.ca
-
Dear Friends, I want to set my servo controller overload setting as per my machine load requirement since all my servo installed in my machine over travelling and hitting trying to run continuously which is resulting servo failures ,repeated timing belt cut issues.Kindly help me resolve this issue.since i am not familiar with servo controllers.Model used A5 II minas servo MADKT 1507 and contol mode in position control setting.
-
Hi, I am trying to do a merge move on 1S Servo. The condition are as follows: Task: Move 2 in(absolute value) and then Move back to 1 in (absolute value). I have to do this move 10 times in a row. The application is material leveling after dumping in the mold. The only question i have is if I use just MC_MoveAbsolute command, the only buffer mode for transition available is velocity. Is there a way i can do it with position. I dont want to stop when I can go from 1 to 2 and 2 to 1 again and again. Its time consuming. But rather a nice oscillation motion without stopping to mimic leveling. Can anybody please help me out with this problem. Thanks
-
Hey all, im looking for some way to convert ASCII msg from rfid reader send through rs232 to CC-Link, I've found AJ65 from mitsu and some converter from Anybus, but I would like something much smaller... changing readers for some CC-link compatible is most likely out of question (unless reader will be cheaper than converter), because they are legacy HW with hundreds of them instaled Thank you
-
Hi, I'm trying to set up PLC (CJ1G) to control servo motor. I'm using position control unit CJ1W-NC413, servo relay unit XW2B-40J6-2B and smartstep R7D-AP02H servo drive. I'm reading through manuals and feels little overwhelmed with information. Everything is probably there, but it's going to take lot of effort to put it together. Can I found example program somewhere? EDIT: When I put jumper to pin 25 (X axis RUN), motor shaft is locked and motor is holding position, so wiring should be correct. When I try to run a program, I can see that parameters are changing in CX-position, but servo is not moving. Please see attached picture
-
Hello everybody, I have a question about homing servo motors. I have a project with new servos from Omron and I would like to know what is the best way to do homing for the servos and how often. Before when we have servos with encoders I was making special homing sequence and was calling by some event. I heard that new servos from Omron pretty smart and remember own position without batteries. So with this 'new generation' of servos what is the key to keep machine robust, easy for motor replacement without useless programming stuff. Regards, Scotty
-
Hallo. I want to know if its possible to write to eeprom of an A800E inverter via cc-link ie. I have successfully written and read any parameter to the ram. But now i need some parameters to be stored in the eeprom. Im using the A8NCE card on the inverter. The manual only states a bit to write speed and torque to eeprom, but nothing on any other parameters.
-
Is there a way to change the parameter of a mitsubishi mr-j3a using fx3u plc? Need this to change the pulse output of a master servo amp to change the pitch of the other slave servo amplifier.
-
I am trying to connect a Delta ASDA-A2 Servo internal motor encoder to a Delta DVP28SV high speed counter input. I was successful in connecting the servo to the plc on position mode with an external encoder connected to PLC high speed counter. Currently having trouble in finding the correct wiring between the servo drive and the plc to count the pulses from the internal motor encoder. Attached are some figures from the servo drive manual. OA --> X0 is obvious, tried s/s to GND, COM-, VCC and VDD... no result. Any suggestion would be highly appreciated.
-
Hi Guys! I have a problem with Motion axis move (MAM) command. There is an Allen bradley servo motor what is working well. But I need to add a new program section, wich is in a specified moment, the axis should move a certain distance. I think I need to use the mam command, just I dont know how can I configure the motion control part. I need to make a new tag ? or what ? I need to use a user define ? PLS help me.
-
Gx Works 2 ve fx2n için bir fonksiyon kütüphanesine ihtiyacım var. Servo ve step motor kontrolü için. thank you
-
Hallo. Im hoping someone can shed some light on these topics. The company im working for have been using gx developer iec 7.04 for ages. The setup we have been using is QxUDE plc with beijer HMI and FR-E700 inverters on profibus. Recently(finally) we have been forced to start using gx works 2 because of newer plcs. With new software come new questions as always. And since im feeling we have been hanging in old software for too long. I want to make sure we are up to date this time. The setup we plan on using is QxUDV cpu, CC-link ie (QJ71GF11-T2), FR-A800 inverters and GOT 2000 for HMI I have made a few project in siemens and TIA portal. And software wise it has always annoyed me, that mitsubishi lacked the same integrated software package as siemens. This made me discover navigator. With system labels navigator makes the variable control, hardware setup and project overview im missing from siemens possible. My question to navigator is. Does people use this? i dont see much about it on the forum? is it already outdated? Gx works 2 or 3 Again i cant figure out what is new and what is old. What are the pros and con for choosing either? CC-link ie or CC-link From internet reading. I find that IE is the newest and faster CC-link version? Is the classic CC-link on the way out? If not why should i choose IE over classic? When setting up CC-link IE in navigator i dont get the same hardware in the catalog as CC-link. To setup inverters i need to user general intelligent device station. Whereas in cc-link i can choose FR-inverters. Is this the way it works? or can hardware catalogs be updated somehow? Blocks for FR-A800 Maybe its just me. but i really think the search function on the mitsubishi download page is crap. When i filter QPLC i get LPLC etc. ive been trying to find some blocks to control inverters without luck. Do i start creating it myself or can you point me in the right direction? I know these are a lot of mixes questions. But i feel we have been non-efficient for years because of bad software choices. Hope someone can shed some light one these points.
-
Hello, I have a cp1h-y20dt-d (sinking output) plc supposedly to be wired to a servo controller. The pulse control method is Pulse/Direction. I've did some manual research on the PLC and found the following diagram attached Untitled. Since the diagram above doesnt show which terminals does it connect to in the CP1H side circled red, I want to ask if those connections belong to the following diagram attached Untitled1? If so, assuming im planning to use only Pulse Output1 (Pulse/Direction method) from the PLC side, is the connection from the first diagram no.1=CCW0- , no.2=CCW1- , no.3=COM (connected to -ve) *Note: these diagrams are from omron's manual SYSMAC CP Series CP1H-X40D_-_ CP1H-XA40D_-_ CP1H-Y20DT-D CP1H CPU Unit Your replies would greatly help. Thanks and best regards, Summer
-
Hello. There is a controller FX5U-32MP in the presence, the inscription "CC-Link IE Field Basic" and the Inverter (FR-A840-00170-E2-60) near the connector, the inscription "CC-Link IE Field Basic" on the front panel. I set up both devices according to the instructions. It turns out to read the state of the inverter (state, frequency). And I can not manage from the controller. Already all the settings that could have changed. Can you scribble what is wrong? p.s. Sorry for the bad english.
-
How to allocate memory in rcpu to link datas of FXcpu . through CC link configuration
-
hi all, anyone can hep..i use servo mr j4.. now got error 121..anything can help..i read from manual error code but cannot understand..
-
Hello, I want to connect the Siemens PLC S7-200 with MR J2S 350CP using Serial communication (RS232/422) so, is it possible or no , any one have an idea... Thank you in advance
-
Hi all,I tried connect to CJ1M-CPU12 with Host Link Protocol from PC.I sended(without spaces) "@00FA F 00000000 0101 82 0038 0A +FCS *Cr" through peripheral port for read Dm area.But PLC didn't answer.I tried again with 19200 7E2,9600 7E2,115200 8E1.But result is same no answer.DIP switches on the PLC are are ON all of them.I read W342-E1-14 CS_CJ_CP+HostLink FINS ReferenceManual.But I didn't solve this problem.Finally hooked Rs232 Port and sended same code with 19200 7E2.PLC sended to me "@00???".Is peripheral port settings wrong?If it is not what's wrong? Thank you
-
I new to the Cx-programmer. I'm facing a problem where i need make the servo motor go to certain direction and stop at the direction until other signal is sensed. Is there any instruction which can be used to do the ladder diagram? is it using PWM instruction? Is my servo motor (sg90) suitable for PLC ? do i need motor driver for this servo motor? or i just have to connect to the PLC 5v ? Im using CJ1M CPU21 PLC module. Im doing a sorting system project that use the servo motor to slide the item to certain angle.
-
Hello everyone, Is there any way to communicate with Mitsubishi Servo amplifier MR-J2S-350CP through RS232 ,I prefer to use 224XP because i already have it... thank you
-
Wanting to write to Balluff Smart Lights via IO Link Master IP #BNI EIP-502-105-Z015. I can find lots of literature on setting up the communication via E/IP in RSLogix 5000 but haven't located anything with Machine edition for writing the data over IP. I am utilizing an Rx3i platform with IC695CPU315 and IC695ETM001 for network access
