Search the Community

Showing results for tags 'omron error'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 623 results

  1. Here is a step by step tutorial... Utilizing the CX Server DDE Manager will allow us to provide a link to the information in the Omron PLC. This link can be placed on an Excel spreadsheet. Charts, graphs, etc. can be made from the data. We will create links on an excel spread sheet from a CQM1H and a CP1L PLC. The information will then be displayed as a bar graph comparing the first ten memory areas. Here is a step by step tutorial... Watch on YouTube : Implementing the Omron CX Server DDE and Excel Let me know what you think. Regards, Garry
  2. Hi. I have this project where we read out data from temp sensors and vaccuum stuff. We use Pfeiffer vaccum cpt 200 for the vaccuum, and we create a frame to send to the modbus unit to pull a value from example '306'. With all the current items we pull data, all the values are only updated every 5 seconds, is there a way to perhaps pull several frame/addresses in one request per device? Current codes we read, some are in sequence of each others, but more has a bit of gap like 00, 02, 306, 307, 398, 330 and so on.    

  3. C# - Compolet missing

    Stefan009 posted a topic in Other Omron Software

    Hi.  I have the CD with SYSMAC Gateway Runtime V1.6 and installed the full CD. I still cannot add a reference to Omron.Compolet in Visual Studio 2019. And the project i am trying to open, complains about OMRON.Compolet is missing. Any idea whats missing to get the OMRON.Compolet to show up in VS.Net 2019?
  4. Added new tags to an existing (and operational) PDB file.  Using DEMO mode switch (/t) to quickly add without USB dev dongle.  When switching from Workspace to Runtime all tags and graphics work.  However, when I switch out of DEMO mode and restart iFix, all tags show up as "Not Defined". the IGS OPC Quick Client shows good comms and data with the new PLC sources, so it's not a PLC comms issue.Truth be told, I do not work on iFix very often, so I'm hoping I just missed a simple step.Thanks in advance!
  5. Hello every one in this video, you will learn about AccumulationTimer in Omron Sysmac Studio. The AccumulationTimer instruction accumulates time during which the timer input In is TRUE. The time is set in nanoseconds. If reset Reset is FALSE, the timer starts when In changes to TRUE. Total time ET is incremented as time elapses. The timer stops when In changes to FALSE. The value of ET is held.  https://www.youtube.com/watch?v=KSSmApnKHR0  
  6. Dear all. I have the issued with Sysmac Studio 1.30. it can not show the Library setting and Library create. just show the reference only. can you pls help me this issued. Many thanks.
  7. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  8. Hello Everyone, I am writing one logic and need some help regarding that logic.   CURRENT LOGIC -  -There are two timers TON_1 and TON_2. -TON_1 timer will start as soon as PLC turns on. -After the done bit of TON_1 timer, the TON_2 timer goes on. -After the done bit of TON_2 timer, again the TON_1 timer will start. -This logic cycle will run continuously, both timers will run turn by turn. Code (Codesys/Schneider Eco Structure Machine Expert)- PROGRAM POU_1 VAR      TON_1: TON;     TON_2: TON; END_VAR TON_1(IN:=(NOT(TON_2.Q)) , PT:= T#100S); TON_2(IN:=(TON_1.Q) AND (NOT(TON_2.Q)) , PT:= T#20S);   Actual Requirement -  -There is a BOOL tag. -If the BOOL tag gets high during the TON_1 running, the logic should move to the TON_2 immediately. -If the BOOL tag does not get high during the TON_1 running, the logic should move to the TON_2 after completion of TON_1. -after the completion of TON_2, again restart TON_1. -Logic Runs continuously in a cyclic mode.   Give me your valuable idea to fulfill the logic requirement.
  9. Hi everyone, To explain the problem a little bit: I have 2 systems that are equal, they have 1 PLC, 1 Inverter and 1 Servo Axis (Image01). The devices are connected via EtherCat. The thing here is tht in these systems the PLC and Servo Axis is the same but the inverter is different. My goal is to have the same project on both systems and depending on the inverter detected use the correct program. What worked: If I add the 2 Inverters and 2 Servo Axis on the project on different nodes (Image02), I can detect which is present using the variable _EC_EntrySlavTb[n]. My issue is that if I want to make more replicas of the systems using different inverters I will eventually hit the Axis Number limit for the PLC while in reality I am only using on Servo Axis at a time. What I wanted: I would like to be able to control 1 Servo Axis with 2 different inverters (only one active per PLC) (Image03). What I tried: The axis parameters can be set using a variable of the type _sAXIS_PARAM, however it seems that the option to change the axis basic settings is not available (Manual: NJ/NX-series Motion Control Instructions Reference Manual (W508) page 5-58) (Image04). The axis basic settings is where the definition of the output device plus control words are set (Image05). Is there a work around to solve this issue? I would really like to avoid having to manually change the output device for the Servo Axis every time I make an update on all the systems.   Best Regards, BR  
  10. Hi All,  I am trying to limit the number of character for user to key in data edit . However, I put numbers inside it shows me invalid number of character. Anyone know how to solve it ? Note; My variable is in String Type   
  11. Hi there I am working on a project where Omron servo drags a part to a certain position using belt mechanism, But to avoid any slippage we decided to put an external encoder directly on the part. I was wondering what is the best to approach to drive the servo using the position of this external encoder. Is there any way that it can be configured directly with the servo? I am fairly new to coordinated motions, any help will be appreciated. Thanks
  12. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,

  13. How to use NB Data Logging

    Link068 posted a topic in Omron

    Good Afternoon All, Just wondering if anyone would have any example code of using the Data Logging on NB designer? I am wanting to use a PID controller and display set point and process variable etc. I have looked in the manual but a coded example would be extremely helpful.    Hope you have a good weekend. Thanks
  14. hello Every one,    I am using a CP1-L PLC and want to communicate to domino ax350i printer over TCP/IP socket programming. For socket programming, I used Omron Function Block CPU012_SendCommand.  I defined network ID and node address. However, I am getting 0502 error which means routing table is not set yes. So, how can I set routing table for both devices?. my PLC on 192.168.250.1 and Printer is on 192.168.250.123 node 7000.    Can any one suggest me best way to do.  Thank you   attached file is for what I did in setting and program for the communication.      
  15. Good Afternoon, I am new to CX-Programmer so excuse this question.  I have written a FB in ST to trigger BOOL and Integer variables. Within the FB I have written ST with a case statement which is working correctly. The issue I am having is that It seems the integer variables in the FB (HMI_Q_FAN_STATUS) are not being passed to the assigned global variable (assigned to D register) on the output of the FB.  In the attached screen shot, the FB is in case 3 therefore the integer variable should display HMI_Q_FAN_STATUS=3, however is still displaying 0. Any help with this would be great. Thanks and have a good day.  
  16. Hi all, currently I'm using NX1P2 PLC for my project. So I'm just using it to transfer data from PLC to my PC but I faced 1 major problem right now which is the connection. I have few experience working on PLC but this time I faced an issue which I don't know how to solve it. So the problem here is, my NX1P2 can't connect stable to my my PLC, initially I thought it was the cable problem, after I changed several cable it's still the same, so I thought it was my ethernet port problem but I can connect it to the internet and also Delta PLC, at last I thought it was PLC problem so I connected it to my colleague PC, they got a stable connection and able to program it. My ethernet keep on displaying "Enabled > Identifying > Unplugged", I check my Ethernet port, it using Intel(R) Ethernet Connection (6) I219-V. Tried to solve it for few days already, anyone faced this problem before? 
  17. Hello everyone! I am quite new to communications between different brands of PLC's. As I have mentioned in the title, machine has a siemens s7-300 series pn/dp PLC with no CP modules (programmed in Simatic Manager). And they are adding an another machine with an OMRON NX102-9000 model PLC (Sysmac Studio). Siemens side also has PC connection over winCC flexible. Somehow i need to communicate between these two devices. Now, I have been looking into this for a while. There are mentions of sockets, but i have no prior experience with them. From what i ve researched omron has "Send" and "Rcv" blocks, but i cant find my way through on how to use them. For example, i dont know "where" to write in the siemens plc. I feel lost to be honest. Can anyone point me to the right direction? Sample program snippets, documents ?
  18. Hi there! I was working on EPLAN Electric P8 when suddenly, the program stopped working (mouse didn't barely move, couldn't click) which resulted in a blue screen after trying to close the program (didn't manage to force stop of the VMWARE process where I execute it).  So, the thing is I can open projects and all, but everytime I close a component window I get this error window: (S275024) Couldn't find setting USER.SYSTEM.GUI.Control.MGGrid.DeviceTagGUI.116.1002.LastIndex.index. And it happens when other different windows (for example when opening Layer Manager I get the same error with LayerManger instead of DeviceTag. Also, if I try to close Eplan by clicking the red X of the window, It won't close. What can I do? There's very little info about this error code in the net and I'm running out of ideas. Thanks in advance!
  19. Hello guys, I experience interesting behavior on NX102 PLC. I have an application with NX102-1200 v1.41 and 7 R88*-1S servos in total. All axes were added as a single-axis position. During servo set-up and tuning we periodically experience a communication error. Connection between laptop and PLC over ethernet. Did anybody have similar problem?  Error message #1: -MC Test Mode was interrupted in the controller. The MC test run is terminated. Error message #2 following error: -A communication error has occurred. 

  20. CP1L-EM40DT-D

    eln_keln posted a topic in CX-Programmer

    Hi there... I'm working on my final project using PLC CP1L-EM40DT-D. I want to set the stepper motor output pulse to match the 3 types of height I want. I used the PLS2 instruction but the simulation results showed the stepper motor rotation did not match the number of pulses and also the frequency I entered. Has anyone here ever used a stepper motor before? If yes, please help by sharing the exact pulse calculation formula on a stepper motor with a load. I really had a hard time finishing my final project because of this. I beg your help. Thank you

  21. plc-plc via internet

    ozeufu posted a topic in Omron

    Hello all, I wonder that is it possible to communicate 2 CJ2M plcs or 2 NJ controllers via internet? Those are far from each other. There is WE70 wirelles unit however distance between them more than 5 km. Any idea how can i solve this issue? Thanks in advance. Have a nice day.
  22. Hey Guys,  So i am working with Omron software to integrate it with the HMI screen.  Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it,  the alarm does not go away from the screen,  it is acknowledged though.    Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ??   Please help guys !!!
  23. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...

  24. EEPROM Error

    Danneil posted a topic in NJ Series / Sysmac Studio

    Hello,I am Danneil. I had a problem with 1s EEPROM. I used the TWINCAT 3  online mode to control 1s Ready,JOG,MoveAbs all are ok. But I made a silly operation that I press the "update the EEPROM" function ,after that I can't control by TwinCAT3. Even I used the SysmacStudio ,there was an error 88 03 on 1s.  The ESI  files    From： https://www.fa.omron.co.jp/member/product/tool/23/esi/download.htm Is there a good way to solve?     Thank you!

  25. CX-Designer || Get error history

    Stefan_CJ posted a topic in CX-Designer

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!