Search the Community

Showing results for tags 'sysmac studio free programming'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 353 results

  1. My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
  2. Hi all, I uploaded SW from working PLC NJ301 1100 v 1.9. Uploading worked, but when I tried to open program, all rungs were empty (see picture). Does anyone know the cause?
  3. The hyphens (dashes) in Sysmac Studio have been replaced by ASCII "boxes."  Anyone having this problem?  See attached screenshot. Sysmac Studio 1.220.80, Windows 7

  4. Homing servo motors

    scotty134 posted a topic in NJ Series / Sysmac Studio

    Hello everybody, I have a question about homing servo motors. I have a project with new servos from Omron and I would like to know what is the best way to do homing for the servos and how often. Before when we have servos with encoders I was making special homing sequence and was calling by some event. I heard that new servos from Omron pretty smart and remember own position without batteries. So with this 'new generation' of servos what is the key to keep machine robust, easy for motor replacement without useless programming stuff. Regards, Scotty

  5. ANALOGIC BIPOLAR OUTPUT - HELP

    JohnHenry posted a topic in CX-Programmer

    Hello everyone,   I'm a student who recently started programming, and I could really use some help.  I have a CPU-31 CJ2M OMRON PLC and a ADO41-v1 analogic card. I need help programming an analogic scale with a bipolar signal -10V to +10V to then control a drive, which will then control the motor. If anyone could help me out of give me some examples I'd be really thankfull.   Thanks!
  6. I currently have certain amount of Recipe data located in form of Excel file on to a PC with static IP address. Is there a way to get that data inside the Nj501 without using an SQL server as I currently have NJ501-1300 which doesn't support SQL. I am okay to send data to the SD card I currently have on NJ PLC as it is easy to get data from SD card to the NJ501.  If there is any example code or a link that helps me create i would be helpful. Thanks in advance. FYI: I am currently using NB10 HMI with NJ PLC.

  7. PLC Training

    Jay T posted a topic in Product Reviews

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  8. Any new tags I add in studio 5000 the HMI project shortcut cannot locate the tags, it says unresolved route to processor. It's the same shortcut all of the other tags are using. Please help. 
  9. This is my first time to the forum and I am still very new to plc programming. I just had to move all of our software over to a new computer ( kind of new) it's running windows 7 pro. The same is as the computer before. Same computer name, same I'm, same file directory. However when I add tags in studio 5000 and reference them in the HMI, it says it is unresolved in route to the processor. It only does this for the new tags. I used the same shortcut and everything so I am at a complete loss here. What do I do.

  10. Struct as FB input

    Alex Teeuwen posted a topic in NJ Series / Sysmac Studio

    Hello,  I am trying to define a struct as an input variable for a Function or Function Block. For example the function AddDelimiter (This is a standard Sysmac function), has a input variable with the variable type Struct, an it is possible to couple a struct to this input (See picture below). If i try to make my own function block with a struct or Structure as an input data type, i get the following error (See picture below). When I try to define a struct from the data types (In this case struct: Test) it doesn't give a error. But when I try to couple a struct to this input, that is a layer deeper than the function block struct i get the following error (See picture below). How can i define a struct as an function/ function block input? Thanks in advance.
  11. OS: Windows 7 Ultimate 64-bit running on VMware virtual machine. Installed software: Studio 5000 V21.0 Licence: Concurrent (served by licence server on another PC). On starting Setup.exe from the VM's desktop I get the message     "Studio 5000 does not support this version of windows" Any ideas how to proceed?

  12. Remote I/O weidmuller

    Alex Teeuwen posted a topic in Omron

    Hello,  I am trying to connect a Weidmüller UR20 Ethernet I/P  (Hardware version 1) to a Omron NX1P2 PLC via Sysmac Studio. I have imported the Weidmüller EDS file into Sysmac studio and connected two tags to the target variable 101 and 102 (I also tried using a array of bytes and a single word).   When I transfer this configuration to the controller and set the controller in run i get the following error: Tag Data Link Connection Failed (0x84070000). I have tried to update the firmware of the Weidmüller I/O but this doesn't seem to help. Also the web interface shows no connection with the PLC. I also tried to setup the connection with the CX network configurator but this gave the same result. Is there someone who can help me with this problem Thanks in advance.
  13. Hello,   I want to do a small scada for Allen bradley plc  on C#. I did a hmi/scada for Siemens S7-1500 plc on C#, it is working and free. I dont want to use Advanced  Hmi. it is looking free but I can not use it in industries as free. so I decided to use direct C#. Do anybody has sample program, code, document, library, link, etc.. about C# and Rockwell plc communication? second solution and question, if anybody has no solution; I may solve it with modbus TCP. but I dont know Compact logix L27ERM CPU support direct modbus tcp protocol. if anybody has knowledge about the modbus tcp protocol document, sample program etc.. I can try to communicate with modbus tcp C# and Allen Bradley.   Thank you in advance. 
  14. Is there any way to establish a variable as min/max value of a gauge on sysmac studio?
  15. I am using an Omron NJ controller and a Cognex Dataman 260 bar-code scanner.   At this point I can trigger the scanner and receive data from the scanner via ethernet/ip. My issue is in converting the response from the scanner to something human readable. The bar-code I scanned reads "872-3GSq".  The results of the scan are located in the variable Dataman_to_NJ[8]-[11]. At some point I know I need to use the SWAP function but I believe my lack of data type knowledge in this system is hindering me. How can I convert the value in Dataman_to_NJ[8] to the string "87"? Any assistance would be appreciated.  
  16. Hello,  I have a micrologix 1400 plc connected to a length measurement gauge. The gauge sends an analog value to the plc to an analog input. I convert the value into a dimension and send it to F8:0. but I need this value in three different steps in the program. Since i just have one element of float (F8:0) is there anyway i can store the value in a different location or create more floating point tags eg. F8:1. F8:2 ?    Thank You   
  17. Hello everyone, I am working with a NB10W HMI connected to a PLC NJ by Ethernet protocol, I would like to know where to start regarding the sending of data from the PLC to the HMI. I have a 50x15 array and should show all those values in the HMI for read / write. How to proceed? I started working with PLC for a while. I'm using Sysmac Studio to programm the PLC and NB designer to the HMI.

  18. HMI VIEWER APP

    jampc posted a topic in Omron

    Hi recently I have seen Omron Europe and I have download an app for Android and iOS, that app can allow you to remote view HMI types NB,NS and NA9last from Omron). The reason of all of this, is if some body have try this app and also if communication and remote view was creat it. I have try all my best but still can't make it, if some body did it, could you please share it?. Thanks, Jose
  19. I have recently come across a free virtual plc simulator called PLC Fiddle. It will enable you to create simple PLC ladder logic code within your browser. This is an ideal way in understanding PLC concepts for industrial automation. All of the basic PLC instructions that come with most plc units have been incorporated in this virtual PLC software.PLC Fiddle is currently in an early stage of development but is functional enough to be helpful to you in learning and understanding PLC concepts.  http://accautomation.ca/plc-fiddle-online-editor-and-simulator-in-your-browser/ YouTube Video: https://youtu.be/G43ZLOwu2dM www.plcfiddle.com Let me know what you think of this for a learning tool. Thanks, Garry
  20. Hello Friends,  I've been writing a program for several days now, Actually I'm an immature for CX programmer and also for plc programming, So I'd like to ask you, if there is any decent way ,,,,I mean a good method of starting to write a program and keeping the flow of it so, it is easy to keep track on what i've been doing from the beginning.??  Cuz sometimes I face the problem of loosing points that were written by myself but not remembering them, So I'd like to learn how to organize my written lines as a wanna be professional.   Thank you   :) 
  21. Hello, Does anyone have experience with getting online a NJ/NX via USB with Sysmac Studio running on windows 10? At Omrons website it says Sysmac Studio offers windows 10 support from version 1.15 but I can't find drivers anywhere. Have checked in the communication middleware folder as you can see in the attached picture.  https://www.myomron.com/index.php?action=kb&article=1580 I have Sysmac Studio 1.20.1.0 running on Windows 10 Professional. Its not a big problem for me right now, because I can always connect via Ethernet, but if the driver exist I would appreciate having it.  
  22. Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard
  23. Hi,  I am writing some routines to decode the data from my Input: data array to User-defined Array Parameters. Is that possible to have a generic routine to decode data coming from more than one module? I have two Module ENode and ENode_1. I have defined User-Defined parameters for the module. Can I make a generic routine to decode the data coming from these two modules and put them in the defined arrays?  the two arrays ENodeData[0] and ENodeData[1] have the Generic User-Defined parameters.

  24. Enumerations in Recipes

    gunnaraherman posted a topic in NJ Series / Sysmac Studio

    Hello,   Is there a way to limit the input of an ingredient value, possibly by use of an Enum?  For example, I have an ingredient called Press_Speed. I want the values to be either Normal, Slow_1x, Slow_2x, or Slow_3x. On the PLC these values are interpreted as numbers. Can I limit the input to the String representation of the Enum?   I'm using the NA series HMI with Sysmac Studio. 

  25. Programming cables

    Raghvendra posted a topic in Other PLCs

    Is there any website that provide all details about programming cables for all PLCs.  I have one local Indian plc "Genie NX" manufactured by GIC India. I want to make programming cable for same. but unable to get details. please let me know if anybody used it? http://gicindia.com/index.html for more info