Search the Community
Showing results for tags 'omron plc analog value read with vb with fins udp ethernet connection'.
Found 855 results
-
Hello All, I have a GX Developer project folder file sent by the client. I am not able to open. It opens the GX Developer and says Failed to read the project file. The screen shot is attached. Also the the project is attached. Please help me to open the project. I am using GX Developer version 8.91V 显示器 综合测试.rar
-
Hi community, i need help .... I want to connect my HMI GOT 1455 to a PLC OMRON CP2MC by RS-232, but i cant do it. I'm using the following connection: HMI GOT1455 - PLC CPM2C (Interfaz CS1W-CN118) 2 (RX) - 2 (TX) 3 (TX) - 3 (RX) 5 (SG) - 9 (SG) - 4 (RTS) - 5 (CTS) * PIN 4 (RTS) IS CONNECTED WITH PIN 5 (CTS) In the HMI I configurated driver OMRON SYSMAC, CHANNEL 2 RS-232, TRANSMISSION SPEED 19.200, DATA BIT 7, STOP BIT 2, PARITY EVEN. But with all of that I can't connect both devices. In the PLC i can see the led COMM blinking, so it should have communication, but the HMI show me "Communication error. Refer to System Alarm in Utility Menu"
-
Hi One of my friend want use more analog output on his vfd. Its a Mitsubishi FR-A740 type. Currently the AM signal is for current, but he needs the speed and frequency too. As we saw its only one analog output is avaiable, but you guys might know better. Can someone confims our theory. Thank you.
-
halo, i'm newbie in HMI and PLC. i have a problem connect HMI omron NB7W-TW00B TO PLC OMRON CP1E. i done setting same baudrate,data bit,parity check, and stop bit in HMI and PLC and i use nb designer for create a HMI display. and this is attachment: a cx programmer, bit switch and bit lamp in nb designer. and the output in hmi is [2]PLC No Response:00-00-1 can you help me? thanks
-
Hi: Has anyone use Fins Command with NX1P2 (or any NX/NJ). I try with Multiway with "[!]: Command format error (1004)" Below is the command from multiway 800003000100000100060101820001000003 Data memory are define in global variable table as A as %D1, B as %D2 and C as %D3. The relevant setting are done on Fins Setting and Memory Setting in the PLC. Anyone ?
-
Hi: Has anyone use Fins Command with NX1P2 (or any NX/NJ). I try with Multiway with "[!]: Command format error (1004)" Below is the command from multiway 800003000100000100060101820001000003 Data memory are define in global variable table as A as %D1, B as %D2 and C as %D3. The relevant setting are done on Fins Setting and Memory Setting in the PLC. Anyone ?
-
Hello all, I am looking into creating a system where I have an NX102 in a main panel, and numerous satellite panels (up to 20) with EtherCat Slaves which would then have daisy-chained EtherCat slaves. Essentially, the main panel would need a GX-JC06 to allow branching out, but this only has 6 ports. 1 of them would be used to connect to the master (NX102), but would I be able to connect one GX-JC06 to another? I highly doubt the GX-JC06 behaves like a typical router, but I can't find any documentation about creating more than 5 branches. Thanks, K
-
Hi there! Today a CP1E-E10DR-D suddenly stopped working. RUN led was off and I couldn't connect to it via USB getting this error: "Selected port does not exist. Select proper port number from Change PLC dialog and press OK button", and automatic online function didn't work as well(it's not a cable/driver problem since I successfully connected to a CJ2 CPU using same cable and PC). Since I also tried to connect with the CPU outside the control cabinet with no success, I asume there is something wrong at hardware level. My question is, have you ever faced something like this? My plan is to try to revive it somehow (maybe trying to locate any defective component in the PCBs or something). So I was just wondering if you have any advice in order to achieve it. Thanks in advance!
-
PLC:- FX3u-48MR Analog card:- Fx2n 2AD Signal source:- 4-20mA Signal generator Tried rd3A Command Tried TO & FROM Command PLC doesnot read the signal, yet no error, wired as per manual... Please suggest if anyone has answer to this problem?
-
How to use a serial to Ethernet converter to send data to RSlogix
Walks posted a topic in Allen Bradley / Rockwell Automation
I'm trying to understand the basics of using a serial to ethernet converter such as this Comtrol DM-EIP-2101, with Studio5000 code. Basically I have a weighing machine that only outputs data via RS-232 and I need to send that data to a PC that will process it through a Studio5000 program and have the data displayed on an HMI using FTview SE. Is it as simple as just connecting the serial and ethernet to the converter and it does all the work? Obviously checking ip addresses and firmware will need to be verified. The main thing I am unsure of is the process of passing the individual data packets from the machine to the Logix code on the PC, things like what the weight of the item was, was it over weight or under, etc.... Would there be an AOI or tags built into the software for a machine like this Checkweigher? I've worked with much smaller items like Cognex Dataman cameras and I know you can just use their AOI that allows you to simply call a tag if you want to display information like if a scanned barcode was correct or whatever. If anyone has done something similar I'd appreciate any guidance. It can be difficult getting the information from the manufactures so I'm looking for answers anywhere I can. EDIT: I guess I should also clarify that only using one or the other (serial or E/IP) is not an option. It will be a serial connection from the Weighing machine to the converter and then Ethernet to the PC. -
Hello! We are looking to find a replacement for our Omron NS Screens in what seems like about 20 systems...there are so many third party/other vendor options available, I am honestly overwhelmed, so I thought maybe some of you had great experience with other vendors screens that I could look into using in our equipment. The screen will have to communicate with an Omron CJ PLC, serial or Ethernet is fine, Ethernet is preferred. Would also prefer screens that actually have Omron drivers. Thank you!!
-
Hi,I want to read transducer signal on PLC.I am using 7kg60008ab/nn transducer and it's analog (4-20mA) output is connected with analog meter.Can I connect the transducer current output (4-20mA) signal to PLC analog input in series with analog meter display???So that I can read the value on PLC simultaneously with analog meter?
-
Hi to everyone! Our company is planning to build >10 same machines. Some features will be developed later down the road. And here I'm facing a problem where I need to start tracking PLC and HMI program build revisions. Has Omron any internal tools to generate program build revision? Regards, Scotty
-
Hi all, I'm new here and need an opinion from you guys on how to set the Gateway for PLC CP2E in CX Programmer ? From my discussion with supplier (OMRON), they mentioned it was unable to set any gateway for CP2E model but I found on some sources that for previous model for CP1L is able to set the gateway. Supposed to be the Gateway function can be supported by latest model, am I right ? Need an explanation on this, Thank You
-
Ethernet/IP Communication - Micro850 and SMC EX600
Aeg.Engenharia posted a topic in Allen Bradley / Rockwell Automation
I'm trying to set up an Ethernet/IP communication with a CIP block between a Micro850 and a SMC EX600-sen3 pneumatic Module. I can read the inputs of the module with the configuration below, but I CANT write to SET or RESET the digital outputs. There are NO errors showing communications issues in the CIP Generic Block I am using... I read that for some reason, it seems that there are problems with writing thru Ethernet/IP protocol between Micro family and other devices not from Rockwell... Does anyone know if there is a way to make it work? Configuration that is working to READ: CIP Service Code: 14 CIP Class ID: 4 CIP Instance ID: 100 CIP Attribute: 3 CIP Member ID: 0 Configuration that is NOT working to WRITE: CIP Service Code: 16 CIP Class ID: 4 CIP Instance ID: 150 CIP Attribute: 3 CIP Member ID: 0 -
I would like to get some feedback or alternate suggestions in terms of monitoring a database connection. The attachment here shows the current programming for the DB_Connect function block which requires the Execute input to constantly be ON. From what I can tell, if the connection is dropped - let's just say the Ethernet cable is unplugged - this input will still be on, and according to the function block, still connected. The Get1minClk is in place to continuously try establish this connection once powered on, but I cannot find any way to periodically check this connection without dropping it and reestablishing it. My understanding is the _DBC_Status.Run only checks that the PLC service is running properly, but is there a way to monitor a heartbeat of the connection TO the database? The only way I've found thus far is to drop the connection and reconnect. But this would be detrimental to the system as it would possibly be reconnecting to the database while trying to write to out to it and hold up the show. As it stands in the second image, the Ethernet cable is unplugged, but the connection shows no errors. Thanks and happy Friday! -K
-
Hello, I am using Omron’s safety G7SA to relay 24 volt line. But the strange thing happening is that, one relay’s output is only 5 voltage, even the relay is on. I exchanged relays, it remains the same. Maybe the base socket is problematic? Or is this just G7SA failure? 5v (exactly 4.96v) is strange. Please give me some advice. Many thanks in advance. Ting
-
Hi all; I have Delta DOP110 IS hmi and i have a modbus tcp device. I want to communicate hmi and device with modbus tcp/ip but i didnt understand device's register address. For example, input bytes 0,1 analogue control word, What is the register address? 40.000 or 40.001 can you help me ?
-
Hi, So I have a problem, that BootP DHCP server doesn't find my 1734 AENTR series B and so I can't assign IP address to it. Been trying many things. Any advice? I'm new to AB and I guess it may be a really easy thing but so far I didn't find a solution.
-
Hello, I am rather unexperienced with PLC's but have some experience. I Currently have 2 Lexium ILS1 motors which we want connected over RS485. I have read a couple of manuals. I have found which format they want to receive their data and what the pinout of their pre assmbled cable is (which hasn't been delivered yet). I am currently unsure about a couple of things. The wiring the formatting of my data i'm sending, and the program. The pictured below show my motor (which runs when i connect it to the PC and run it using the software provided so it is in working order) and the PLC with option port (which i used to transmit data to another PLC, so again i can't blame the hardware for being at fault here). However when i connect the cable and try to communicated I Don't see the LED light up. I followed Lexiums guide on which pins to use. But i figured for good form i might include these pictures to be certain hardware is correct. Finally here is my program. I followed Omrons quick start instructions. But: my send ready flags never become high and the way data has to be formatted for these lexiums seems very labour intensive. But this is how i understood it needed to be done. Am i doing something (or a lot) wrong here? I hope someone can help me out here! If any further information is needed i'll do my best to provide it. Kind regards.
-
Hello every one in this video, you will learn about Omron PLC PID Control (CX-Programmer) you could see it for free by using the below referral link for 5 days. https://www.udemy.com/course/omron-plc-training-course-fa/?couponCode=0384FB604CD8E26CDD09 I hope it will be useful for you. Regards Mehdi
-
Hello every one in this video, you will learn about Omron PLC PID Control (CX-Programmer) you could download as free by using the below referral link: Omron PLC PID Control (CX-Programmer) | Udemy I marked free download for 1000 people. I hope it will be useful for you. Regards Mehdi
-
Hi, I have a CP1L and CP1E Omron PLC, and I try to make communication between my PLCs and my system (raspberry pi with Linux OS) using Node-red and specifically using the OMRON-FINS node ( https://flows.nodered.org/node/node-red-contrib-omron-fins) and more detail ( https://github.com/ptrks/node-omron-fins ). So I’m looking for a module to create an Ethernet port for my PLCs. ( both PLCs have RS232 port) . Can you please guide me to find a compatible RS232 to Ethernet module for my PLCs? Thank you
-
hi im new to omron and ladder. im trying to get the mombers from a analog input to be shown on a hmi screean how is tis done? i have sett up the hmi screan and tested with making a button that acts like a start button but i cant get the numbers from the analog inn to show on my (nummber innput component) in nb_designer pliz help btw plc = cp1L-L14DR-A with a CP1W-AD041 analog module.
-
NX1P EtherCAT Master to Beckhoff EtherCAT Coupler
TigerLily posted a topic in NJ Series / Sysmac Studio
Hello! I am working on a quote for a new project that will use EtherCAT but also requires DeviceNet for some legacy components. Has anyone successfully used the Beckhoff EtherCAT coupler (EK1100) with the DeviceNet Master Terminal (EL6752) and an Omron PLC as the EtherCAT master? My concern is that the coupler will only communicate with the Beckhoff EtherCAT master, but since it is so much more expensive to get the new Omron parts to communicate DeviceNET i am hoping this could be an option. The equipment is extremely simple and price is a major consideration. Thank you!!!
