Search the Community
Showing results for tags 'omron ethernet/ip'.
Found 697 results
-
I recently had an issue where a system shipped to a customer's site with a mismatch between the IP address loaded into the CJ1W-ETN21 card and the node dials on the card itself. We had been testing the settings of the card by pinging the address and had assumed if the node dials were wrong we would not be able to ping the card. As we just found out that is not the case! Both our quality department and our customer's end user were able to ping the Ethernet card, but the end user could not establish FINS communications because the node dials were not correctly set. Is there a way to test that the dials are correctly set? Thank you!!!
-
how to connect cpm1a to ns5 hmi? cant do it
-
Here is a link to a thread on a recent post showing how to communicate serially to an Omron PLC using VB.Net. This uses the Omron Host Link serial protocols. (C-Mode Commands) It will read 10 DM registers and display them on the form. http://accautomation.ca/implementing-the-omron-host-link-protocol-vb-net/ Here is the source program that can be downloaded. Other links: VB6 Program: http://accautomation.ca/how-to-implement-the-omron-plc-host-link-protocol/ VBA Program: http://accautomation.ca/how-to-implement-the-omron-host-link-protocol-part-2-vba/ Regards, Garry www.accautomation.ca
- 16 replies
-
1
-
- host link
- c-mode commands
-
(and 2 more)
Tagged with:
-
PLC to PLC Comms via Generic Ethernet Module
Powerchamp posted a topic in Allen Bradley / Rockwell Automation
Is it possible to add another AB Rockwell PLC to the network tree as a Generic Ethernet Module and use it as IO? Any idea where I would find information regarding assembly instance and size of I/O/C for AB Rockwell products? If possible, what are the pros and cons when compared to produce/consume and MSG instructions? Don't need to use it real world, just curious. Many thanks in advance. -
Hello I'm new for PLC, I need to set pump turn ON/OFF in 4 time/day every day => [8:00-8:10]a.m, [11:00-11:20]a.m, [2:00-2:10-14:10[p.m, [5:00-5:20]p.m ** I have Omron PLC CP1E-N30 , Could you advise me, please ?
- 12 replies
-
1
-
- real time clock
- omron
-
(and 1 more)
Tagged with:
-
My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub... But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
- 10 replies
-
- ace software omron
- adept
-
(and 1 more)
Tagged with:
-
I am using CJ2M PLC.I want switch on a output for certain time by a timer and holding bit if interlocks satisfied.If interlock not OK timer has to hold the time and output should be off. if again interlocks OK again output has to ON upto balance time completion and has to give timer done output for reset holding bit.please suggest.
-
Hi, I am trying to do a merge move on 1S Servo. The condition are as follows: Task: Move 2 in(absolute value) and then Move back to 1 in (absolute value). I have to do this move 10 times in a row. The application is material leveling after dumping in the mold. The only question i have is if I use just MC_MoveAbsolute command, the only buffer mode for transition available is velocity. Is there a way i can do it with position. I dont want to stop when I can go from 1 to 2 and 2 to 1 again and again. Its time consuming. But rather a nice oscillation motion without stopping to mimic leveling. Can anybody please help me out with this problem. Thanks
-
So I did this simple Function Block, pretty simple, and yet it keeps giving me this error, after a bunch of failed combinations the error persists, without telling me whats wrong. And therefore won't even allow me to download the program to the PLC (CJ2M CPU31) or even simulate. I heard it's a simple thing to fix but I really dont know how to, since I'm quite new to this. Here's the function block itself in the picture and the programming inside it, although since it gives me no errors, i don't think that would be the problem
- 1 reply
-
- cx-programmer
- omron
-
(and 5 more)
Tagged with:
-
Synchronize two motors with a CP1L-EM and Omron Rotary Encoders
Hartech posted a topic in CX-Programmer
Hello, I need to Synchronize two 4kW motors connected to their own individual AltiVar VSDs. To put it simply the two motors are pulling cables on a pulley and when loaded the motor's slip and the speed varies. I have an Omron CP1L-EM PLC and 2x Omron Rotary Encoders ( E6C2-CWZ5B encoders - 360 PPR) - connected to each motor, What is the best way to read the pulses from the two rotary encoders then convert to RPM? 1) Using PRV or PRV2(883) instruction, - this would be the best option as it would convert the value to RPM - however, can I use this instruction on both Counter 0 & Counter 1? 2) Or read the raw value from Counter 0: A270 (connected to motor one's encoder) Counter 1: A272 (connected to motor two's encoder) Convert the pulses to RPM - then compare and adjust? 3) Or using CTBL. - is this a useful instruction for this application? Once I get the RPM speed from each motor - I can then do a compare instruction - see if there is a mismatch and if so send a scaled analogue output to the VSDs to correct the speed if required. (10-50Hz) What would be your recommendations? any help would be most helpful. Thank you.- 4 replies
-
- omron
- cx-programmer
-
(and 4 more)
Tagged with:
-
Hi all ! I need a help about connection between mitsubishi GOT Simple series (gs2110) to kawasaki robot via crossed ethernet cable on tcp/ip protocol. I actually have a fx3g for main unit of my project, and also i have a kawasaki robot for slave unit. My purpose is basically to control both with HMI. I used RS422 between plc and got gs2112 and I want to use a crossed ethernet cable between robot and got but i did not communicate with ethernet even between pc and got. There is a manuel which I found on internet about GOT2000 Connection Manual (Microcomputers, MODBUS/Fieldbus Products, Peripherals) I think i need to work on microcomputer connection (ethernet) subject, what do you think about that ? I need all advices and ideas which come from you. [ROBOT]--------Ethernet--------[HMI]--------RS422--------[PLC] https://electrobit.ee/web/file_bank/Manuals/operaatorpaneelid/mitsubishi/GOT2000/GOT2000-connection-manual-ENG.pdf
-
Hello everybody, I have a question about homing servo motors. I have a project with new servos from Omron and I would like to know what is the best way to do homing for the servos and how often. Before when we have servos with encoders I was making special homing sequence and was calling by some event. I heard that new servos from Omron pretty smart and remember own position without batteries. So with this 'new generation' of servos what is the key to keep machine robust, easy for motor replacement without useless programming stuff. Regards, Scotty
- 1 reply
-
- omron
- sysmac studio
-
(and 2 more)
Tagged with:
-
Hello everyone, I'm a student who recently started programming, and I could really use some help. I have a CPU-31 CJ2M OMRON PLC and a ADO41-v1 analogic card. I need help programming an analogic scale with a bipolar signal -10V to +10V to then control a drive, which will then control the motor. If anyone could help me out of give me some examples I'd be really thankfull. Thanks!
-
Hi Brothers! I need your help, currently I'm trying to connect the PLC Omron CP1E to CX-programmer and it works, but my problem is in cx-designer, as I test the program, I have trouble in selecting connect to PLC, please see attached file. What should I do? Answers would highly appreciated. Thanks
-
Does anyone have an .eds file for the Zebra printers. I need to use ethernet/IP from a CJ2MCPU31
- 2 replies
-
- .eds
- ethernet?ip
-
(and 1 more)
Tagged with:
-
I currently have certain amount of Recipe data located in form of Excel file on to a PC with static IP address. Is there a way to get that data inside the Nj501 without using an SQL server as I currently have NJ501-1300 which doesn't support SQL. I am okay to send data to the SD card I currently have on NJ PLC as it is easy to get data from SD card to the NJ501. If there is any example code or a link that helps me create i would be helpful. Thanks in advance. FYI: I am currently using NB10 HMI with NJ PLC.
-
I have 6 PLCs CPM2A and 4 PLCs CP1LM I'm going to network them to do the supervision and data acquisition from each PLC and connects them to a pc via an ethernet port So what are the hardware and software used?
-
What am I doing wrong? I have an FX3GE PLC. I have set up the IP address 192.168.3.254 and I am able to connect with my laptop running GX Works2 version 1.501X. I also have a GS2107 that I have set up with IP address 192.168.3.18 (Default). I can communicate with my laptop running GT Designer3 version 1.151H. The HMI is still failing to communicate with the PLC. I have followed different threads on this forum, tried different port settings on the HMI. I have attached my settings. Is there anything else I need to set?
-
The plc runs for a minute and then the power turns off while the supply voltage is ok. I was sure that it is for the power circuit problem inside the plc. As I had a spare power circuit of cp1h and I checked it had same voltages output (5vdc, 24vdc & 0), I replaced it. Now I cannot connect it with my laptop to change to run operating mode. Could anyone help me?
-
Hello, new user here also a new user to all Adept Omron products as well. I have seen a lot of information based on the Omron Smart Controller EX - mainly connecting the controller to the Adept Ace program. I do understand that the dongle is needed to enabled into the controller, but can this same process be the same for the Omron Smartvision MX? Thanks.
-
Who Have Someone connected Citect with Omron CJ2M CPU32 ? Can i use it? Device communications wizard -> CJ Seres PLCs -> Ethernet or need to Finsgateway software. [Setting] 1. Boards TCPIP / 0(Address) 2. Port -I192.168.100.10 -P9600 -U (*PLC: 192.168.100.1 , PC: 192.168.100.51) 3. I/O Device 0/1/1/ / OMFINS3 [MANUAL] ----> Fallow the manual ONLY CS1, CV Need to setting w/n/u/V or w/n/u/S CJ2M do not need to this setting ? I/O Devices Form Complete the I/O Devices form as instructed, with the following specific information. I/O Device Address The station address for an Omron CV Series PC is specified as follows : w/n/u/V for CV mode or w/n/u/S for CS1 mode where w is the FINS network address (1-127) n is the FINS node number (1-126) u is the FINS unit address (0) There are no defaults for w, n, or u, but if you do not specify a mode (with a V or S), it will default to CV mode. The FINS node number should be the same as the IP address node number. The FINS network number should be the same for all ETNs on the Ethernet segment. There is no relationship between FINS network numbers and IP network numbers. Thank you..
-
Hello I need to sent data between PLC CP1L-M30 and Hyberterminal with serial port (RS232C port 1) ,but there isn't data show up . something is wrong? Could you advise me? my ladder as below
- 5 replies
-
- cp1l rs232
- omron rs232
-
(and 1 more)
Tagged with:
-
Hello Omron programmers, have a nice day to you all. I just need your help in this, i hope you have explanation. I added a few sequence to the machine with compare instruction D2255 and D2259 as memory data. I really wonder what’s going on. D2255 a decimal value of 9, when it transferred to compared instruction it’s 9, but when D2255 become 10 or above, when it transferred to compared instruction it will become 16 or above, there is an additional of 6 to the decimal value when it more than 9. I attached the photos of it for more details. Can somebody please help me? Thank you.
-
We have been successful using the EIP4CCPU module in communicating Ethernet IP between Compact Logix And Mits Q PLC's. Always with the Allen Bradley as the master. However, we are presently trying to control a 520 PowerFlex VFD from the Q series as master. Has anyone attempted this?
- 18 replies
-
- eip4ccpu
- ethernet ip
-
(and 1 more)
Tagged with:
-
I am trying to use FINS/UDP network to communicate with a Siemens device (at a customers site over seas from my home office), today I attempted to set up a SEND command based on information my customer received from a local Omron representative but had no luck. I feel like I am missing something in a setting somewhere, does anyone have experience doing this? I am using a CJ2M-CPU35's built in Ethernet IP port which is also communicating to 5 other Omron devices over Ethernet IP, so I am wondering if there is an issue having both networks. Thank you!