Posted 3 Oct 2017 how to connect cpm1a to ns5 hmi? cant do it Share this post Link to post Share on other sites
Posted 4 Oct 2017 i have it but cant connect. do you know how to? Share this post Link to post Share on other sites
Posted 11 Oct 2017 Do you have the proper cable? What are the connections in the cable you are using? Share this post Link to post Share on other sites
Posted 21 Oct 2017 i made one serial but cant connect do you know what is the cable reference? thanks Share this post Link to post Share on other sites
Posted 23 Oct 2017 To the best of my knowledge, the adapter you have should be Host Link (RS232). In that case this cable should work for you. Share this post Link to post Share on other sites
Posted 30 Jul 2018 Hi IO_Rack, Sorry if I revived this old post, but I have a similar issues regarding CPM1A. I just replaced my old laptop and with it all the cable drivers included. As I am now building up again the plc softwares in the new laptop, I now need to re-install the cable drivers. I have a working cable for CPM1A before, but now I need to re-install the driver. Is the cable driver ( CPM1A ) available for download? or can someone from this group share the cable driver? Thanks. Leo Share this post Link to post Share on other sites
Posted 30 Jul 2018 LD_M This is just a serial (RS-232) connection. No specific driver is required. If you new computer does not have a built in RS-232 serial port you will need a USB to RS232 converter. Although it is pricey, I would suggest the Omron CS1W-CIF31 unit. It has always worked with anything I have tried to connect to. Hope this will help. Share this post Link to post Share on other sites
Posted 30 Jul 2018 Hi gtsuport, Thanks for the info. I will this CS1W-CIF31 usb converter. Cheers. Leo Share this post Link to post Share on other sites