Search the Community
Showing results for tags 'allen-bradley omron'.
Found 723 results
-
Hi there... I'm working on my final project using PLC CP1L-EM40DT-D. I want to set the stepper motor output pulse to match the 3 types of height I want. I used the PLS2 instruction but the simulation results showed the stepper motor rotation did not match the number of pulses and also the frequency I entered. Has anyone here ever used a stepper motor before? If yes, please help by sharing the exact pulse calculation formula on a stepper motor with a load. I really had a hard time finishing my final project because of this. I beg your help. Thank you
-
Hello all, I wonder that is it possible to communicate 2 CJ2M plcs or 2 NJ controllers via internet? Those are far from each other. There is WE70 wirelles unit however distance between them more than 5 km. Any idea how can i solve this issue? Thanks in advance. Have a nice day.
-
Hey Guys, So i am working with Omron software to integrate it with the HMI screen. Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it, the alarm does not go away from the screen, it is acknowledged though. Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ?? Please help guys !!!
-
Hello,I am Danneil. I had a problem with 1s EEPROM. I used the TWINCAT 3 online mode to control 1s Ready,JOG,MoveAbs all are ok. But I made a silly operation that I press the "update the EEPROM" function ,after that I can't control by TwinCAT3. Even I used the SysmacStudio ,there was an error 88 03 on 1s. The ESI files From： https://www.fa.omron.co.jp/member/product/tool/23/esi/download.htm Is there a good way to solve? Thank you!
-
Hello all, I have a master PLC(CJ2M) which is communicating with slave 4 slave PLCs(CP1L). one of the PLC have communication error, upon checking in cx-intergrator it shows that all the other slave PLCs and other components are connected to network-1 and faulty PLC is connected to network-0. Unfortunately, I couldn't change it as cx-intergrator doesn't allow me to change download the changes. So anyone can please help me with this issue. If you know the troubleshooting way then please reply. Thanks in advance. -Yash
-
Change Index of Highlighted Recipe (NA5 series)
Sin Ching posted a topic in NJ Series / Sysmac Studio
Hi All, I am totally new for sysmac studio and using NA5. Currently I am using standard recipe layout of NA5 I wish to search recipe by using keyword function.By using keyword, the target recipe is highlighted. However, I cant find the variable of recipe that I can control. Does anyone can help ? -
i want to use indirect register, but why contact 100,IR0 is not ON, is it my program correct?
-
Hello All, Please Help Me.. How I can to connect Omron CP1L-M + CP1W-Cif11 with Mitsubishi Inverter D700? Thank you. Omron modbus belum fix.cxp
-
Training Service Business starting?
mayseprogramming posted a topic in For Sale, Employment, Services or Wanted
So, I have thought about creating my own Business for the last few years. With this business I would go shop to shop/factory to factory teaching anywhere from Basic PLC programming to HMI design and integrations. I love to share any bit of my Knowledge/experience with anyone and I have learned this more when at my first engineering job they had me train several guys on how to start up Servo Motor jobs with PLC and HMI's. I really enjoyed helping others learn and get over the hump of intimidation and lack of experience with electronics and such. I have had a lot of different experience from being an Electrician for 5 years to Engineering 10+ years now- (Design, Software, Startups, Service work, Installs, and Management) I then started a career of being a PLC Instructor (part-time for 1 year now) for adults and this too help me with my idea of starting my business. At my instructing school we would get a variety of people anywhere from fresh out of High School to experienced Maintenance guys that want to specialize in PLC and HMI's. With all of this being said, does anyone think there would be a great amount of need for someone to come your work place and teach Allen Bradley, Omron, and Mitsubishi PLC and HMI and maybe one day down the road Servo Motors and logic for them too? I think that more one on one with a couple trainer lab stations, I could really help not only workers advance themselves but also companies benefit both? I have gone to training for my previous employers, sometimes traveling far away for a week at a time and costing my employer a lot of money where my rate would be much less and on-site of the customer/trainee's. Starting out I have bought several used pieces of PLC's, Input Cards, Output Cards, (Only Allen Bradley for now). I have also bought cases to make my training units more safe and portable. Looking at creating a business name and logo as well as possibly creating a (LLC). It has been a slow but steady process though. Feel free to add anything or comment anything to this with ideas. Thanks! -
Control Logix connection with HAAS CNC
jpratik92 posted a topic in Allen Bradley / Rockwell Automation
Hello I am trying to get for HAAS CNC variables eeg. 10800,10801 etc into the PLC. Does anyone know of any ADD ON instructions ? Thank You -
hello, Maybe somebody have macro script of omron vision system . The macro script must work that If I push button "Scene switch" then macro script must done "Data save" and then change scene. Or somebody can help me to create macro code?
-
Hello All, I am college graduate student and I know little bit of cx-programmer for modifying existing program. I have master CJ2M CPU34 PLC connected with three CP1L PLC. All 4 PLC are connected via hub through Ethernet cable. I want to read/write some memory data to/from PLC through Python programming. As I am new to PLC and Python I have not much idea regarding omron PLC and python communication. So is it possible to connect python with master/slave PLCs directly? If yes then how can I communicate? I was trying with cpppo library to connect with PLC but I could not connect it. I have attached the master PLC communication setup for the reference. Any kind of lead/help is appreciated. Thank you in advance. -Yash
-
Hallo, i want to connect PLC Omron CP1E to indicator weighing scale with modbusRTU connection and i have a CP1W-CIF11 module to connect indicator with CP1E. ,but I have no experience in RTU modbus communication in the PLC. How do i start? *i just need output: 1. Coil (Reference No = 0. Output bits) for input switch with address 3 (Tare). 2.Input Status (Reference No = 1) for output lamp with address 17 (stable) 3.Input register (Reference No = 3) to read data with address 5 (gross weight) 4. holding register (Reference No = 4) to write comparison data with address 17(over) page 85 - 94 in attachment ad4402_manual.pdf
-
Hi, I have CJ1G-CPU42H plc, when I try to backup the program it just fails at step 6 as indicated in the attachment, 6- plc memory ##error aborted ##
-
“DL I/O Alarm” - One or more devices in the I/O configuration of the controller are not responding What does the alarm mean ?
-
i want to communicate ml1400/compact logix L24ER to simatic s7200 via ethernet.Please help me with it i am new to it and dont know how to do it.
-
HiI have just bought a new AB CompactLogix 5380 (5069-L306ER) labeled "FACTORY SEAL".When I trying to connect via USB or Ethernet on studio 5000 softwares, no matter RSlinks or BOOT-DHCP tool, there is no responding at all.I know these PLC shipped row and there must be flash before using for first time, But I think when I turned it on via MOD Power, while connected to PC, there must be some sound for connecting via USB cable, or some activity in small led's of Ethernet port in both sides. but there is no response at all.I'm begining to doubt about my cables, although the USB cable and the Ethernet cable are standard cables, I try it with two or three cables.P.S: The package does not included a SD card, I put a SD card from my own, Could it be problematic?Thanks.
-
Hey All, I have run into an issue where my CJ2H-CPU64 EIP cannot communicate over EIP To the nodes connected. This machine in particular was running just fine previously. I have replaced all ethernet cables and the Hub as well.(8-port unmanged) I can ping all the nodes that are connected. But i cannot ping the PLC in question. I can connect directly to the PLC but not over ethernet. So i changed the PLC out thinking it was a bad port but the problem is the same on the new plc. Any Ideas? Thanks in advance Richard
-
How can I improve my counter's accuracy?
Nathanb posted a topic in Allen Bradley / Rockwell Automation
So I have a plc program where most of the outputs are based on a counter that goes from 0 to 1000. The counter speed is adjustable and is generally set to run through a full cycle (count from 0 to 1000) anywhere between 0.5 to 2 seconds. The problem is, when I try to energize an output by using an EQU instruction, it will almost always skip the count because the scan time is not fast enough. I've been using a LIM instruction which has been working, but its not quite as accurate as it needs to be. I switched the counter logic to be continuous to try to make it faster which made it almost perfectly accurate... But only in the continuous task; it made the other periodic task significantly less accurate. I was curious if any of you had any tips on how to remedy this or just general help. I am still relatively new to PLCs and ladder logic so any advice would be awesome, Thanks in advance! Edit: The purpose of the counter is to cycle through from 0 to 1000 over and over again. My outputs actuate during a certain interval within this cycle (For example I would say actuate from 300 to 800 and it would stop and end once it hit those values via an EQU or LIM instruction). I wrote the logic as follows: First I calculate how many cycles per minute I want to perform, using that value I calculate how many times I want to increment my counter per millisecond. Then a timer is given a preset of the total cycle time. While that timer is running I continuously multiply the timer's accumulated value by the "cycle count per millisecond" that I calculated earlier; the resulting value is the current count that all my outputs are based on... Hopefully that makes sense, I know it's not the best but I could not figure out a better way of doing it and I know rounding is certainly making the accuracy worse. My hardware is: Allen Bradely PLC (5069 l306erms2), 5069-ob16, 5069-ib16, and a Kinetix 5500s2 Driver for my motor(s) -
Hey. I have a PLC program I need to customized to a diffrent PLS (CP1L). PLS ony support CX-programmer. I miss the I/O list. Are there a easy workarund here, to find out the IO list ? Best regards Wictor
-
EtherCAT Master to EtherCAT Master Communications
TigerLily posted a topic in NJ Series / Sysmac Studio
We have a customer insisting on communicating with our NX102-9000 over EtherCAT, we have explained multiple times that EtherCAT is not intended as a facility communication protocol and recommended that instead they use Ethernet/IP, but after a year of pushing back they are still insisting and willing to pay for the Engineering work to get this to happen. Has anyone successfully configured two EtherCAT masters to communicate with each other? In the past I have used the PN-PN Master Coupler from Siemens to get two ProfiNet Masters to communicate with each other so I am hopeful that a similar device exists for EtherCAT, but I have not had any luck searching the web for such a device. Does anyone have experience with or know of such a device? Thank you!! -
Hello guys I am a beginner in FINS UDP communication and I am trying to do a FINS UDP communication between an omron PLC CP1L-E in client mode to communicate with my PC that is in server mode, I am using the SocketTest v3.0.0 program that is in listening mode and still was unable to receive any information from the CLP, can you help me? The program and some images of the simulation are attached Thanks for reading SERVER PC IP ADDRESS 192.168.15.160 CLIENT PLC IP ADDRESS 192.168.15.10 tcp socket (1).cxp
-
Hi! Does someone has a pinout and/or wiring diagram for an old CQM1-CIF02 cable? Thanks!
-
Hello Sir / Ma'am, How to connect Omron CQM1H-CPU21 (Image Attached) to the software for Configuration. I have tried it many times but I think I am missing something from the wiring side. Above mentioned Controller has a built-in Peripheral Port and an RS232 Port, We don't have that particular cable that connects the Controller to the Software via Peripheral Port. Kindly help me to connect the controller using the RS232 Convertor. I am using ATC-810 RS232 to USB converter. (Image with all Pin Details attached) Software - Syswin or cx-programmer. (Upload failed, please use the below link of wetransfer.com to see images) https://we.tl/t-XmuqtUCYOk
-
Hello there, Today i have commissioned my first project with OMRON make PLC. Model: CP1L-EM40DT1D. (CX-Programmer) I have 2 built in 0-10V Analog Inputs on the plc. for analog input no-1 i get the digital value of 0-1000 in specific plc register address corresponding the 0-10V. (Factory setup) But today on site, i have noticed that some miner value of 0 to 50 is always coming and fluctuating very fast in that register, however the transmitter are genetaring 0.0V only (I have checked using digital multimeter with high precision) PLC and Transmitter are already grounded and all the cable connections are tight as well. so how to overcome this high fluctuating value ? is there any setting to filter the input ?
