Search the Community

Showing results for tags ' firmware revision 4.006 or later -1768-eweb compactlogix ethernet/ip web server module'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 397 results

  1. Hello,   I'm currently working with a 1769-L19ER-BB1B CompactLogix controller connected to 7 1734-IE8C analog input cards. Into these cards I have about 14 Setra 269 Differential Pressure Transducers, all of which have their own individual display. Our goal is to capture and record the data from the Setras in the PLC, but I am struggling to scale it correctly. I currently am running a series of SCL function blocks to change the raw inputs (3277 - 16383) to the Engineering range (-0.25 - 0.25). The Setras have a standard output range of 4-20 mA and the calibration sheet I have for it matches that (4 mA = -0.25, 20 mA = 0.25 etc.) My issue is the SCL function block outputs are not matching the displays that the Setras have on the sensors. The difference can be somewhat staggering (largest one ive seen is PLC - > 0.045 , Sensor - > 0.003. Any ideas on what I can try to fine tune this scaling? 
  2. Hi. what i've gathered, i need an EDS-file for the siemens s7-1200-system to be able to specify an ethernet connection in sysmac from the omron plc side to connect to the siemens ethernet/ip server. Anyone know where or how to get an EDS file for the siemens plc so i can import it into EIPprofiles in sysmac?

  3. GOT2000 <-> Omron CJ PLC

    sante123 posted a topic in Mitsubishi

    I have an application where I'm using GOT2000 to read data from the weighing unit using RS232 and I send this value to Omron CJ2M through Ethernet/IP. Some variables from that PLC are connected to the elements of the HMI. The problem is when writing the weight value to the PLC through script or Data Transfer is disabled, the RS232 reading works fine, it's fast, etc. However, when I enable the script which writes data to the PLC, the RS232 slows down by a lot, like it refreshes every 2-3 seconds. If i set the script to execute like every 1-2 seconds, it is working better (still slower compared to when the script is disabled) but I cannot leave it like this, because the weight is used to control some valves, pumps, etc. Enabling script doesn't slow down normal communication with PLC, because I tried to test it by displaying the value of seconds from PLC on the HMI and it refreshes every second. Does anyone have idea why such tiny script causes so many problems with RS232?
  4. I'm trying to exchange some data between two controllers. I've used a manual which describes Tag Datalink communication. Everything works fine on the Bradley side, which means I can read values from Omron without problems. However, on the CJ it isn't working. In the Network Configurator I get error every 10 sec (Tag data ling error, code 03D5) and cannot read any data from AB. When I open Connection Structure Tree I see that the input tagset from AB has 'Broken path (0000000000000)' and Unknown Device right next to IP address. I've tried using EDS from the Rockwell as well as uploading it from AB PLC directly - I don't know if it might be EDS issue. The only thing I noticed that inside CJ2M-EIP21 EDS it says that Ethernet/IP is Class 1 connection, however in the 1769-L35E EDS Ethernet/IP is Class 2 connection. Have anyone ever had such a problem?
  5. Has anyone have any experience getting a Wieland Safety plc (SP-COP1-ENI) communicate with an Omron Plc (NX102) via Ethernet/IP? EDS file installed, connection is set as per the documentation yet  I cannot get it connected.  

  6. Error **03 Special Parameter Error

    antonio sanchez posted a topic in Mitsubishi

    Hello I have a problem whit PLC mitsubishi FX3U thernet communication, we have a module  FX3u-ENET-ADP. and we have the error "**03 Special Parameter Error".  
  7. Dear all member forum plc , Hello anyone can suggest me,how to communicate QJ71E71-100 WITH OPC Takebishi,How to to configure parameter on QJ71E71 -100 and OPC server Takebishi,I Want to aqcuisition data machine to database,
  8. I have a 1747-L30B SLC Brick and it is set to load from EEPROM on boot S:5/8, Error S:1/10, and Run S:1/12. I need to make changes to the program and then store it to EEPROM via "Comms>EEPROM>Store to EEPROM."  When I attempt to store the program with changes, it displays the message "Insufficient Memory Module Size." I assumed the EEPROM memory was maxed out, but I also uploaded the existing program currently stored to EEPROM, made no changes, and attempted storing it back to EEPROM and received the same message. Any advice?

  9. NB to CP1L-EM

    Robafe posted a topic in Other Omron Software

    Has anyone connected a NB HMI to a CP1L-EM via ETHERNET NB = Node 2 IP 192.168.1.152 PLC = Node 1 IP 192.168.151 Using my Network Switch/HUB NB works fine when setup to com 1 on the PLC (Wrote the PRG using serial) NB says no response from PLC Is there a secret setting in the PLC i need ? ? Rob  
  10. Hello All, I would like to control Powerflex 525 drive with Omron NJ301-1200 PLC via Ethernet/IP (Set speed, start, stop). I've gotten until the part where I downloaded the necessary .eds files of the drive and imported into my Sysmac studio. However, I'm stuck after this point while assigning target variables and Originator variables and eventually setting speed and controlling the vfd. I've attached images for your reference.

  11. NA5 HMI System Recovery V7.3.0

    photovoltaic posted a file in Utilities

    Version 1.0.0

    12 downloads

    Place the 2 files on an SD card or flash drive. Follow update instructions in V117 manual section 4-3 https://assets.omron.eu/downloads/manual/en/v2/v117_na_series_programmable_terminal_hardware_users_manual_en.pdf
  12. NA5 HMI System Recovery V7.3.0 View File Place the 2 files on an SD card or flash drive. Folow update instructions in V117 manual section 4-3 Submitter photovoltaic Submitted 08/08/22 Category Utilities

  13. NX1P2 FTP Data Sending Process

    man31 posted a topic in Omron

    Hello people! I'm working on a project that part of it, is to send data that are collected in the PLC, via email to office. The PLC and HMI I use (NX1P2 and NB series),they do not support any email instruction, unfortunately.  To overcome this obstacle, I decided to forward those data (saved in .csv file) by using the FTPPutFile instruction and to upload the csv file from PLC to a dedicated folder to the office computer. PLC will be the client (passive) and the computer will be the server. And here is where I need your help.. The set up is offline by using a dummy ethernet switch. I set an IP address in the computer, as well as to the PLC side. If I set the PLC as a server (FTP server ->use -> port 21,pass & username), I can connect from the office computer to the PLC and download the file, by using cmd. When I try to use PLC as a client, Ftpputfile instruction always gives errorid 2407 and erroridex 00000226. In the FTPPutFile instruction box I set the following: ConnectSvr: IP address of PC, port 21, username & pass  SvrDirName: the physical path I set when I configured the FTP site on PC (C:\...) LocalDirName: '/' FileName: '.. .csv'    Further more, in the file explorer I type ftp:\\(IP address of PC), I log in but when I try to create a new folder 550 error is coming up (I suppose this is for permissions). Am I missing something? Do you have any suggestions/guide for making this work? I am not an IT and I am not experienced in that field so any help would be great!   Thanks! Man31          
  14. I'm trying to understand the basics of using a serial to ethernet converter such as this Comtrol DM-EIP-2101, with Studio5000 code. Basically I have a weighing machine that only outputs data via RS-232 and I need to send that data to a PC that will process it through a Studio5000 program and have the data displayed on an HMI using FTview SE. Is it as simple as just connecting the serial and ethernet to the converter and it does all the work? Obviously checking ip addresses and firmware will need to be verified. The main thing I am unsure of is the process of passing the individual data packets from the machine to the Logix code on the PC,  things like what the weight of the item was, was it over weight or under, etc....  Would there be an AOI or tags built into the software for a machine like this Checkweigher? I've worked with much smaller items like Cognex Dataman cameras and I know you can just use their AOI that allows you to simply call a tag if you want to display information like if a scanned barcode was correct or whatever. If anyone has done something similar I'd appreciate any guidance. It can be difficult getting the information from the manufactures so I'm looking for answers anywhere I can. EDIT: I guess I should also clarify that only using one or the other (serial or E/IP) is not an option. It will be a serial connection from the Weighing machine to the converter and then Ethernet to the PC.
  15. I'm trying to set up an Ethernet/IP communication with a CIP block between a Micro850 and a SMC EX600-sen3 pneumatic Module. I can read the inputs of the module with the configuration below, but I CANT write to SET or RESET the digital outputs. There are NO errors showing communications issues in the CIP Generic Block I am using... I read that for some reason, it seems that there are problems with writing thru Ethernet/IP protocol between Micro family and other devices not from Rockwell... Does anyone know if there is a way to make it work? Configuration that is working to READ: CIP Service Code:     14 CIP Class ID:         4 CIP Instance ID:     100 CIP Attribute:         3 CIP Member ID:         0 Configuration that is NOT working to WRITE: CIP Service Code:     16 CIP Class ID:         4 CIP Instance ID:     150 CIP Attribute:         3 CIP Member ID:         0

  16. Hmi modbus TCP/IP device communication

    mustafa.celik posted a topic in HMI & SCADA

    Hi all; I have Delta DOP110 IS hmi and i have a modbus tcp device. I want to communicate hmi and device with modbus tcp/ip but i didnt understand device's register address. For example, input bytes 0,1 analogue control word, What is the register address? 40.000 or 40.001 can you help me ?  
  17. Hi All, Has anyone had the experience of connecting two Fernhill Scada units using an OPC UA?  I am intending to use Fernhill Scada on my Master PLC to read tags from my Slave PLC's Fernhill Scada. Then, displaying local tags (Master PLC, "Fernhill SCADA Unit 1") and read/scanned tags from the Slave PLC, "Fernhill SCADA Unit 2". In the meantime, I am trying to use both of my Fernhill SCADA units interact with each other (one unit to read tags from the other unit) by using Internal Digital Tag on the Fernhill SCADAs.  Any help would be appreciated.
  18. Can I find a Link download for the old Rockwell firmware of 1756-L55 rev. 15.56 ? or Can anyone share the firmware with me? Please help!!! Thank you very much.

  19. GOT1000 HMI with Q03UDE PLC issue

    python01 posted a topic in Mitsubishi

    I have a bit of an issue with communication between GOT1000 HMI (I think the exact model is GOT1675V) and Q03UDE PLC over Ethernet. The GOT is set to 192.168.1.4 and PLC is set to 192.168.1.2 but I get the error "Communication Error. Refer to System Alarm in Utility Menu". Now how do I access the utility menu? I have tried to tap and hold on the upper corners of the HMI but nothing happens. I also can not switch between screens when I press buttons even though they are directly linked via screen #. Almost like the HMI froze up. Wonder if anyone had similar issue and what the solution might be. Thanks for your help.
  20. hello, I want to ask, maybe some of you know about this, I want to take a program on compactlogix but it has a firmware version 19.xx while the rslogix application I have is version 21.xx, there are several options offered by the application to be able to take the program, update the firmware in compactlogix or downgrade the rslogixku application to version 19.xx. if i upgrade the firmware in compactlogix, what about the program is the program safe or not, and if i upgrade the firmware will the program in compactlogix work properly?

  21. Reporting for Siemens PLC

    Timoti posted a topic in Siemens

    Hello, We want to do excel reports on Siemens PLC. We do not want to use historian programs. Do you know another programs?
  22. Hi! I would like to ask your help. I want to know more about the communcation systems what allen bradley use. Most important for me, is Ethernet IP communication, Controlnet communication, Sercos (servo) communication, maybe devicenet communication.  I know I can find some manulas on the web, but I thought I ask it here too, maybe you guys have some more documents which is contain more information. Every information is highly appreciated. Thank you very much guys.  
  23. PWTech is a rapidly growing company specializing in wastewater treatment equipment. We are currently hiring for a Controls Engineer. This is a full time position with some travel required. Requirements: 3-5 years experience Proficient with Allen Bradley MicroLogix, CompactLogix PLCs, PanelView HMIs Proficient with ladder logic programming Proficient with basic electrical theory, control systems and electronics Familiarity with NEC, with special focus and understanding of articles 409, 430 A high level of proficiency in written/spoken English Familiarity with Unitronics PLC/HMI is desired but not required Duties will include: Producing control panel submittal and as-built layout drawings, components lists, and line diagrams Selection and integration of sensors, motors, control systems and other mechanical and electrical equipment. Coordination with internal and external project engineers to resolve electrical and control questions and issues Programming, modifying and troubleshooting Allen Bradley and Unitronics PLCs and HMIs Providing assistance and remote support to field personnel Maintaining inventory of long lead items for warranty and project purposes. Location: Rosedale, MD (outside Baltimore) Technologies: 50% Allen Bradley 50% Unitronics. Salary: 95k-105 depending on experience. Higher if you have >10 yrs experience. Contact: Kreal@pwtech.us
  24. Hi I am looking for a way to read and write data from PLC omron words, bits via FINS or EtherNet/IP protocol using python programming lang. Does anyone have any results in this? I really want to see your work, because all my attempts have failed. Thanks.
  25. Hello, I have an .ACD file but do not have any software to read the controller tags. Can anyone please help me convert the file into a pdf? I can see from Notepad that is was made using RSLogix 5000 V21.   Thanks! G Pump_17_11_09.ACD