Search the Community
Showing results for tags 'Output and Communication Boar'.
Found 229 results
-
Hi there. Recently I've experienced problems when connecting to a S7-300 PLC via MPI/PROFIBUS. I use a PG with CP5711 processor. The thing is that I'm able to connect when I plug the 6ES7901-0BF00-0AA0 cable (male to male) directly to the PLC connector, but when I try to do connect to a PLC that has any device connected to the DP port (let´s say an inverter or HMI) I get 33:17075 error. PG/PC Interface it's correct, in fact another PG with the same configuration is able to connect through the already connected DP device's cable. Station number and transmission rate is all correct. So I tried the Simatic NET Diagnostics Test and I got error 0x0313 and since the mentioned parameters are correct I refered to this link: How do Diagnostics and Remedy work in STEP 7 when an online connection with the CP... - ID: 11492532 - Industry Support Siemens Where they say the following: I've searched for this readme file but can't find it, and there are no useful results when looking for it on internet. Why am I able to connect directly to the PLC but not when another device is connected and I have to use the female connector of the DP connector itself? Should I try to reinstall CP5711 drivers? According to Windows, I got the last drivers for the CP. Thanks in advance and I hope you can help me!
-
Hello, Any one have idea how to read and write variable for Schneider tm221 plc with Modbus function codes 3,6,16. I attached file for power supply communicator with registers, I need to adjust power supply from 25% up to 100. Please need help. Best regards, Chyngyz Modbus OPERATING INSTRUCTIONS.pdf
-
Hi, FX-2NC-32MT PLC need to change Battery, Can you please tell me the battery model no? Which communication cable require for FX-2NC-32MT PLC upload or download program? Thanks & Regards Sohel Ahmed
-
Dear Experts Request to let me know in case it is possible to get communication software to communicate with CompactLogixL24ER. As per my understanding Rs Logix Studio 5000 is needed , version number required is V21.000 Thanks and Regards
-
Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
-
Dear allI have DVP14SS211R series Delta PLC Which is having 24V DC supply voltage. I am using PLC as master and My end device as slave. My slave device set device_iD=1I am using Modbus RTU protocol for Function code1baud rate =9600parity =noneStop bit=1data length=8I would like to know how to send request with Function code 1(Read coil Register). i have attached code reference. Communication block it wont give error it shows 0 .means No error
-
Hey Everyone, My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong. I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through. I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on. Thanks in advance.
-
Hi all, I have finished installing ethernet adapter module FX3U-ENET-ADP on the FX3U-48M PLC. From the ethernet module, i connected it to a wireless router and then i am planning of connecting to the ethernet module using GXWorks 2 on my laptop through wireless router. On the ethernet module, the error indicator LED is on (red). From the FX3U-ENET-ADP, it means that there might be setting or hardware errors. I am asking if i have missed some steps on the installation process and if any of you have experience with similar problems. Thanks in advance for the answers.
-
Hi all, I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?
-
Activating PLC Output at the specific time - please help
MRPLC82 posted a topic in Allen Bradley / Rockwell Automation
Evening, I struggle with simple task... I need to activate PLC Output at the specific time of a day. I`m using GSV to obtain PLC time, data is being moved to DIN[7] registers. Then I have three EQU (Hour / Minute / Second) and at the end of rung there is OTL for output. Rung below I have two EQU (Hour / Minute) to disable output at different time - OTU. However every time OTL is energised , OTU on rung below is fired too. What am I doing wrong here ? -
Hello, I am building an application in CitectSCADA and I want to communicate with an Omron Sysmac CS1G. The connection between the plc and the Citect computer is through an ethernet to serial adapter (the computer doesn't have com ports on board). I'm having some difficulty establishing the communication and I want to make sure that I can actually reach the plc. Is there a way to check that the computer can reach the plc over the serial connection without using CX programmer? Maybe using Hyper Terminal, Putty or something similar. Thank you, Liron
-
Using NX-PG0232-5 to control Stepper Motor (NJ PLC)
ragzz1995 posted a topic in NJ Series / Sysmac Studio
Hello, I need to control a stepper motor(have stepper driver) using NX-PG0232-5 with NJ301 PLC. The function is simple, i need to run the stepper motor continuously at a specified velocity. So, in NX-PG module I've made the settings (Ch1 output mode as "Velocity continuous pulse output") and given the tags to IO (as shown below, sorry i'm not able to attach image). I've also added the initialization program to switch on the vfd. Now to move continuously i should should just give speed in pps in "PG_Ch1_Command_Velocity" right? Ch1 Controlword Control word 1 W WORD Ch1 Switch On Switch ON for pulse output 1 W BOOL PG_Ch1_SwitchOn Global Variables Ch1 Enable Voltage Start turning on the power for pulse output 1. W BOOL PG_Ch1_Enable_Voltage Global Variables Ch1 Quick Stop Immediate stop for pulse output 1 W BOOL PG_Ch1_QuickStop Global Variables Ch1 Enable Operation Start operation for pulse output 1 W BOOL PG_Ch1_EnableOperation Global Variables Ch1 Fault Reset Reset errors for pulse output 1 W BOOL Ch1 External Output Aggregated data of external outputs for pulse output 1 W BYTE Ch1 Command Position Command position of pulse output 1 W DINT PG_Ch1_Command_Position Global Variables Ch1 Command Velocity Command velocity of pulse output 1 W DINT PG_Ch1_Command_Velocity Global Variables -
RSLogix 5000 BOOL Base tag not activating output
Kris Salmons posted a topic in Allen Bradley / Rockwell Automation
I have a Base tag of BOOL logic that will not activate the MOV output. The Base tag is paralleled with an Alias tag for a NO pushbutton. When the pushbutton is actuated it produces the desired output. Has anyone encountered this issue from a togglebit base tag before? Why would a base tag produce a different outcome from that of an alias tag that function properly? -
Hi Everyone, I've just installed InTouch V10 and am trying to develop communication with Emulate5000, for educational purposes. I looked over the internet and found some videos on how to develop communications by setting up the topic name and node name in DA Server manager, but the issue I'm facing is that my SMC only shows logViewer and nothing else (snapshot attached). Am I missing some vital component or dirver? Or is there some problem with my installation? Help would be much appreciated. P.S: Window Maker and Viewer are working fine. Thanks, Sabih
-
CJ2M communication modbus (scu41) with power logic SCADA from Schneider
throneviser posted a topic in CX-Programmer
hello expert i want ask some help So i tried to communicate my Omron PLC (cj2m cpu31) with SCADA from Schneider (power logic) on my omron side the comunnication on PLC already take to communication to NB so i add communication module CJ1W-SCU41-v1 I want asking how to open the communication if i want the scada become a master and my plc become slave i got this from omron website is that program compete for my case? i need configuration for scu41 module also to communicate or if you have suggestion i really open i just need to open port RS232c from scu41 so scada can read the data from my plc tahnkyou for your help MRTU_CPU_Slave.zip -
I have 24 Siemens Siprotec relay(7sj62) which i want to communicate with Scadapack 330E (Schneider) on 103 Protocol. but every time I try to communicate it shows Slave device is failed to communicate. trying to communicating via serial (RS-485). What should i do..?? or do i need to communicate it with Siemens PLC..?? If so which PLC should use..??
-
Hello, i want to connect my PC to the PLC(RSLogix5561) over TCP/IP. In rslinx the Ethernet driver are configured. My PLC IP Adresse is 192.168.1.100 and my PC Adresse is 192.168.1.105. From my PC i can successfully ping the PLC IP Adresse, but from the PLC i can't see my PC. And it does'nt schow in RSlinx. Is there anything i am missing?
-
Hello there, I am new to OMRON so need some help to communicate two PLC over FINS. Here are the description of the system... (IO Table image is attached) PLC1- CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2- CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX) Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210. I have tried RECV and ECHRD blocks but didn't succeed yet. Two CPU are connected over ethernet via a industrial switch. Can you help me to achieve data transmission please...
-
hi there. .. i am new to plc programming.. Right now i am having problem related to communication between hmi and plc.. i have HMI WEintek 6070ip and plc mitsubishi FX2n.. i have written a program in gx developer . and communicate it with EASY Builder for HMI. so for now plc is communicating with my program written for hmi on pc. but when i downlaod to hmi and connect plc cable to hmi then hmi shows no plc communication. i am having a problem for communication between hmi and plc. any help will be a life saver. thanks in advance
-
Hi everyone! I got this machine with a CP1H PLC and NS8-TV00B-V2 as PT. I was told that they were working fine, but suddenly, It appeared a communication issue: black screen and "connecting..." at right bottom. I dont know if It is a configuration problem or some hardware damage. These are the configuration in the PT and the PLC. The communication is through RS232 Serial. I tried to communicate another PT screen with the same communication settings and IT WORKED!. ' I've been thinking that, perhaps, the serial port A is damaged, I have tried to set port b, but I havent could. How can I configurate PORT B?? THANKS...
-
Hey all - I am working on a car wash system design that will utilize the Nayax payment system. Has anyone utilized them? How do I incorporate the device with PLC to automate the system. After payment is approved how can I send out that signal from them, all via ethernet on a managed switch w/ wifi for exterior comms for the Nayax.
-
ControlLogix L71 controller and Citect SCADA 7.10 Communication
DeeEngr posted a topic in HMI & SCADA
Hi All, Hope you all doing well in this pandemic life. I would need your expertise with an issue I have been struggling with for past few days and thought to reach out here. I am working on a migration project with GE PLC and Citect SCADA 7.10. The GE PLC is migrated to ControlLogix L74 Rev24.10 while Citect SCADA is retained. For testing I only have L71 and L82 and could not managed to organise L74. When the code the loaded in L71 and connected to Citect, I cannot see tags in Graphic page but I see the subscription.txt in Debug folder shows all tags good . The same code when loaded in L82, the Citect works instantly. Does anyone know this behaviour of PLC and SCADA? Regards, DeeEngr -
Hi every body, could you please help me; i have a mitsubishi plc serie iq-rwith the followings modules:powersupply r61p, r01cpu , rx40c7 inputs , ry10r2 outputs , r60adv8 analoginputs and r60da4 analog outputs. i am newbe with mitsubishi plc ;i would like to learn using the analog output of the R60DA4.for exemple i would send a digital value to the ch1 and convert it a voltage that i can mesure on the output of channel1.i have tried but i didn't succeed.i am using gxwork3.i have configured channel1 as +10v -10v output, normal mode , normal output;then i made a simple program in sfc to try this conversion but i get nothing in the output of channel1. i found that the digital value should be sent to the adress D11 wich is the adress of channel1.here you will find the file i made with gxworks3.could you please help me. ANALOGOUTPUTSCF.gx3
-
Dear sir, I am working in container terminal, we have Siemens plc s7-300 , Bromma spreader with SCS-3( codesys software) spreader field device sensor (ifm) connected to slave ifm CR9011, now a days we are facing too much issues in scs-3 so we planned for isolate the SCS-3 but we want to know ifm module Cr9011 how to communicate to Siemens plc 7 how to write in hardware configuration. can you please suggest us.
-
Comparison of Mitsubishi, Allen Bradley & Siemens
Gibblet posted a topic in General Topics - The Lounge
Hi all, I am in the process of doing a project for some school work and need to do a SWOT analysis of the latest modular PLCs from Mitsubishi (R series), Siemens (S7-1500) and Allen Bradley (ControlLogix). So I thought what better way than to ask the people on what they think are the pros and cons of each! Thanks for your responses in advance!
