Search the Community
Showing results for tags 'screen error'.
Found 168 results
-
Hi guys. I found error on PLC and from PLC diagnostic I found this Operation Error 4100 as per attach picture. FYI, there is no SD card mount onto this PLC. I wonder what is ATA card. This error wont affect the operation. Any advise on what to check? This ladder is pop up when I clicked, error jump. Thanks.
-
Working with A2SHcpu and something went wrong. Cleared PLC memory and I have an error code 17 (ROM). I don't know how to clear this. I have tried creating a new project and parameters but when I try downloading parameters only it gets to about 13% then says complete. When I read the parameters back from the PLC they have not changed and are still at factory default. There is no memory card that I can see in the processor. Any help or guidance would be much appreciated.
-
Good afternoon, I'm trying to add a custom image to the screen saver on the NA5 HMI, has anyone had experience with this? I can get to the screen saver setting on the device but there's only "Blank" screen as default, but I'd like to add my own image instead. Can anyone help? Thanks!
-
Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR". Any idea what can I check?
-
Omron CQM1H - NOS purchase - ERR/ALM LED On - Program Transfer Problems
JEJump posted a topic in CX-Programmer
Hi Everyone,I have a customer that needs a CQM1H (CPU51) replaced. They purchased the processor new-old-stock from a source they found online. It arrived in the original packaging and had the safety label around the top of the unit, so it seems that it is as advertised and no need to suspect that it would have problems. I purchased secondhand, a power supply to attach to it and program it from the bench instead of in the machine. The customer also provided me with an SD card containing the project file(s) for the machine. I am able to load the project in CX-ONE (running on Win 7) just fine. My computer has a native serial port (COM1) and I built a programming cable to work with the DB9 peripheral port according to a diagram I found online.The processor powers up right away with the ERR/ALM continuously on. No other LEDs came on initially, and after a bit of playing around with communications settings, I finally landed the right protocol and my computer seemed to identify the processor correctly. I compiled the source and attempted a transfer to the PLC. I got some failed message (or maybe messages) at the end of the transfer. It did seem to send all of the binary code, it just ended with an error message that I unfortunately didn't write down or grab a screenshot.Anyway, what I have now is a PLC processor with the ERR/ALM LED on always, I've never seen it in RUN mode, and now after the programming attempt, I'm seeing the COMM LED strobing at about a .5sec frequency (with or without a cable attached to the peripheral port), AND I cannot get CX-Programmer to again acknowledge the processor anymore. I'd like to reset this back to the way it arrived to me, but can't figure out how to make that happen offline. The DIP switches don't seem to cause that effect. I should say also that the DIP switch settings are all OFF except 3 and 7.Any help is much appreciated!Thanks,John -
Hi there! I'm trying to communicate a Weintek cMT2128X with a CP2EN via Ethernet. The thing is I'm getting 'No device response' messages every 2-3 seconds. They'are connected at some point because some values are updated, but the connection error keeps showing up. So far I've checked: - Comm. settings are okay in both sides - Wiring is good - Happens the same with a CJ2 CPU. - There are two arrays of 50 UINT each, I don't know if that's slowing things but that would surprise me... I've worked with Weintek HMIs before (communicating with different CPUs: LOGO!, CP1, CJ2...) and never had this problem. I just set the IP addresses and everything was working fine, so I guess I'm missing something. Hope you can throw some light at this! Thanks in advance
-
Hi, I am trying to set up a Twin HMI system on a machine. (screens on each side mirror each other during operation) I have a GE Versamax Micro Controller PLC and two 10” Quickpanel+ HMI screens. This is a newer version of one of our older systems that operated in the same way, the only physical difference is the serial cable arrangement as the old system used 8” Quickpanel HMIs with different connectors. HMI 1 is connected from COM1 via RS232 serial cable to Port1 on PLC. (Connects and interacts with PLC ok individually) HMI 2 is connected from COM2 via RS485 serial cable to Port2 on PLC. (Connects and interacts with PLC ok individually) There is a Cat 5 Ethernet cable between the HMIs. The software for the old system works with the new set up and the ViewNetwork consoles on the HMI screens appear behind the ViewRuntime and display the neighboring Target screen and their IP connection details. I have adapted our latest single screen machine software into a Twin screen version in the same way as the old software as far as I can see but with the newer software the ViewNetwork consoles are blank with No target connections. Each screen interacts with the machine ok but they do not mirror last data or page selected from the other screen etc. as the old version did. I have been through all the options I can find in the old software and set the new software the same but with the same blank ViewNetwork console. What settings do I need to adjust to enable each HMI to mirror the other and see each other through the ViewNetwork consoles. Any help will be greatly appreciated. Thanks in advance,
-
Hi I want to look into a program i recieved, but i get this error when trying to open it. Im running the 30day trial atm, but i got the same error when I ran the 1.45 version earlier. Never used sysmac before, so if anyone has a tip, it would be nice
-
Hi all , I have been using MELSEC - Q series plc for the past two project i dont find any issue with that but for the third project used same PLC same model but there is issue which I found unable to resolve The issue is when i try to communicate PLC using LAN cable by direct ethernet connection it works normally but by communicating using HUB network I cannot communicate, I checked all the parameters setting, I dont know what is the issue even contacted mitshubshi service to troubleshoot but they are not responding So here i am for your guidence to solve this issue see the images below to analyse this issue This connection is direct ethernet connection which works normally The parameters are set and writed to PLC The IP is set to my PC for communication When i try to find the cpu in the network it shows the cpu IP After that I checked for connection Test it show error I have also attached the Network route which i used to communicate Network Drawing.pdf I hope someone will help me to solve this issue Thank you , madhan ravichandran
-
Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR". Any idea what can I check?
-
Hello, I hope somebody can help me give me hint on where I could look. I do have an MAM command that is throwing error 11. "At least one axis is not configured to a physical motion module ora has not been assigned to a Motion Group." The error message itself is clear but the Servo is running flawless until it suddendly stops doing this (the customer states that it mostly happens after an EStop). The EStop is hardwired via the STO inputs and those are active while the error is shown. So far the only way to reset the error is to shutdown the machine and power it up again. I can't find any errors in the error logs that would hint to dig deeper. Has anyone had this error or knows how to solve this? PLC: CompactLogix 5370 Servo: Kinetix 5500
-
I wanted to online in FPWIN GR7s to FP-X C30t but it show MEWNET device
-
GOT2000_NG_1000.lib NOT FOUND HOW TO SOLVE THIS ? PLEASE HELP.
-
Hello! I'm currently using NB designer v1.531 (Build 210511) and I'm having compilation errors. It states: Connecting... Connection Error PT HMI0 Compilation error! Cannot create pkg files! I'm have trouble understanding, what does this error mean? I'm not connecting to any HMI, I just want to compile the program and test it offline. The weirdest thing is that if i click "Compile" enough times, it will eventually compile, but this is really interrupting the workflow. Does anybody else have this issue?
-
I am trying to setup a CC Link between two machines. I have done this before without issue, but for some reason this is not going well.. I added a second CC link card to CPU2 and set it as ST 24 for the CPU1 network. CPU 1 : Master. cc0.jpg. The original machine was setup using TO/From for each station, so i couldn't add this new link through the GUI. CPU 2: Local cc1.jpg When i try to use the GUI to setup this side the buffer stops working. but if i activate any TO/From instruction here i get a system fault with a 2110 SP. Unit Error CPU2 buffer cc2.jpg. But when i block the TO/From you can see the buffer is working at that exact same location specified. 2110 error says I am addressing the wrong card but the buffer proves that I am not.
-
Hello, has anyone noticed that plenty (not all) forum posts are changed to quotes from TWControls? What is happening here? Hopefully only a momentary breakdown
-
Good day sirs, i would like to see your help with this our company owns multiple HMI Omron NS8 it seems that this unit always break in the site. we fixed one of the unit but it is only showing white screen is this possible that there no CF connected inside the HMI? ( note i was newly hired by the company wanting to help my superiors) thank you in advance everyone
-
We have an older Nematron system we are working on and requires some software. The system uses DOS 6.22 and launches Screen Ware 2 software and the Reliance DCS V1.01 to talk to the Rockwell AutoMax PLC that uses the Programming Executive Version 4.2. We have the Nematron parallel port keys (dongle) needed and are looking for installation media for editing. We also need information on the executables that open the screen files the ULTRA MAIN MENU is not available to us. We are interested in viewing the config for upgrade so even software that is newer and capable of converting and reading the program is fine. Any help is appreciated!!
-
i just got my NX1p2-1140DT controller with a R88D-KN04-ECT. i conneted every thing and directy got the 87 message on the display. i found out dat is becous wrong wiring I dont have the I/o cable incallt with omron they where saying that i don't need it and i can controll the motor controller full via ethercat. i already try to change to pdo mapping. what am i doing wrong? can someone help me? is it indeed true i dont need the i/o cable thanks in advance for helping.
-
EcoStuxure Operator Terminal Expert
jie en posted a topic in Modicon / Telemecanique / Schneider Electric
Hi, I would like to know how can I change screen using PLC program for the HMIST6400. -
Array A INT[32] Array Index B INT Destination C INT I am trying to move an Array (A) Element (A[2]) using a symbol (B) in ladder into a destination symbol (C) C = A [ B ] Result: ERROR: Array Index of Operand 1 out of range at rung 1 ( 6, 0 ). The documentation suggests that it is possible, but I am unsure if there is something I am doing incorrectly. Note* Fixed indexing works with no errors Is there another method to accomplish this? PLC : CJ2M CPU31 CX- Programmer: Verion 9.74 Update 1: If I go online to the PLC It does look like the array look up is working. Is the issue with the mov block? Update 2: I changed the memory locations which has caused a different error to appear. This error is clearer but does not explain the manual excerpt I posted further up ERROR: Only the constant can be specified for the index of the array. at rung 5 ( 6, 0 ). Update 3: Solution 1 I managed to hack together a proof of concept using pointers and indirect offsets Update 4: Solution 2 For some strange reason things work as expected inside of the function blocks so I made one where the array is In-Out and with an input and output respectively. Note* External reference to pointers inside of the function block produced an error. Function block Logic Update 5: Solution 3 Now I feel like I am going crazy, I tried just the original code again and it works... I have no idea why and if it was not for all the documentation I would be lost as to why it works now... Update 6: Conclusion It seems to have array indexing work the array index must exist in the D Memory Block. The reason it did not work above is because I somehow had a MOVR block when I tested after moving all the variables to the D Memory Block. I hope this journey helps someone else :)
-
Hai, I have problem with my CP1W TS001, suddenly reading result always #7FFE. i use CP1E-N60 and 2 expansion module, AD041 and TS001. I put TS001 after AD041 then my program code as follows : mov #8051 105 mov 7 D20 mov 8 D22 the reasult at D20 & D22 always #7FFE could someone help me to solve this problem?
-
Hello. I am writing a function block and i am getting the following error: ERROR: STRING type or an Input Output variable is not supported by the PLC of this unit version. Check the unit version in program check options. When i try to remove the string i get error: instruction is not available for current plc Is there somewhere where i can see which instructions i can use? Or is it not the string or one of my in or outputs I am doing something wrong with? Kind regards, Ralf
-
Hi All; Trying to make a backup of a Q02CPU. Used GXWorks2 to get the program and parameter files from the working CPU. The System is on an 8-slot rack with mixed IO including a ProfiBus module (QJ71). Got a new CPU, powered down the system and installed it after setting the DIP switches the same as the working one (2 and 3 both on, others off). Power on system. Download the program and parameters to the unit, have the ERR LED blinking and the CPU will not run. PLC Diagnostics show this 2200 error, which when I look it up in the book starts talking about 'drives', which I find out have something to do with the DIP switches. The combination of switches 2 and 3 indicate the parameters are to be stored in Standard ROM (Drive 4), but apparently this is not happening when I do the download of the program and parameters. Is there a specific procedure I need to follow to put the parameters into Standard ROM (Drive 4)? Or, did I get a replacement CPU that is either A)Bad or B)does not have this Standard ROM? Or...? Any assistance would be appreciated. CPRenaud
-
Micro800 ASCII ABL error code 7 issue
Awloescher posted a topic in Allen Bradley / Rockwell Automation
Hi all,I'm completely new to ASCII and trying to figure out where I'm going wrong here.Application: I need to send 2d barcode data to a KGK Jet model CCS3000L Inkjet printer. Only protocol possibility is ASCII. PLC I have is a Micro850, and the only port option for ASCII is the serial port. I modified one end of a 2707-NC11 cable to connect PLC TxD to printer RxD, PLC RxD to Printer TxD, and PLC SG to Printer SG. I jumpered CTS and RTS at the printer connector, and the 2707 cable I'm using doesn't have wires on the Micro850 CTS or RTS pins.Printer company verified that I can just jumper RTS and CTS on their side and not connect their DTR and DSR pins (since I'm not using hardware handshaking). I don't really need any flow control for the application ( I don't think...again, ASCII noob here).Do the CTS and RTS on the PLC side need to be jumpered? Does the DCD pin need to be jumpered or connected to something if I'm not using handshaking?I downloaded the Micro800 ASCII read and write functions and function blocks from Rockwell library, and they seem to be working, except that I keep getting ABL error id "7". This error states, "Cannot complete ASCII send or receive because channel configuration has been shut down using the channel configuration dialog box." I have the serial port enabled and configured to ASCII, no handshaking, baud 9600 same as printer, no parity check, 1 stop bit, character length of 8.Any help in pointing out what I'm doing wrong or things to try would be greatly appreciated! ASCII_TEST.ccwsln
