Search the Community

Showing results for tags 'omron sysmac studio'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 699 results

  1. I don't suppose there is anyway to modify the popup Alarm Notification?  I know you can press the Acknowledge and get it to clear...most of the time, but it always seems to be right in the way when it does pop up.  I can move visual data to a different part of the screen that I want to see when an Alarm appears, but I'd rather be able to move the Alarm Popup or Resize it all together....   Thanks,
  2. Hello Everyone,   Make - OMRON HMI Model - NB7W-TW01B Software - NB Designer   Suppose I have more than one number input display on a screen of HMI. When I touch and enter the data in any one of them and press enter, the keyboard not closing automatically. in sted of auto close, the cursor moves to the next number input display to enter the data. How to auto-close the keyboard after entering the data in any number input display.
  3. Hi all,  I have a problem communication between Handy Scanner Honeywel (1902g) and Omron PLC CP1L-EM (CIF01).  1. Cable configuration for communication  2. How to set parameter  Thank you for your help.
  4. I have inherited a program to work on using MAM motion commands on a CompactLogix 5370 processor. The MAM variables for some parameters state that REAL data type is required. However in looking at the the code those REAL variables are actually declared as DINT. Is this OK. Does Logix somehow accept DINT for these parameters even though REAL is specified. So if parameter is 5600 DINT it somehow interprets this as 5600.00 REAL. Confused!
  5. Dear All, Omron NQ HMI was installed with CJ1M CPU. Now I am trying to replace the HMI with weintek MT8071iP but HMI showing communication problem. I have omron HMI NQ program and set protocol settings as was set in NQ please see the attachment. Please suggest what may be the reason? waiting for reply Thanks Shoaib omron_settings.zip

  6. CP1E-E10 with HMI?

    Robror posted a topic in Omron

    Hi there! I was wondering if it is possible to connect a CP1E-E10 CPU with a NB HMI. This model has only a USB port marked as "Peripheral", so I was wondering if it's even possible to communicate with a HMI. According to Omron's web, "Communication options" refers to PLC-HMI connection options? Maybe there is some kind of module that allows it? I'm looking for some info but I can't find it yet.   Thank you!
  7. Hello all I am trying to figure out if its possible to save a screenshot of every screen on a HMI to usb at the same time, so i have currently created a button on a screen that saves the screenshot to external memory, is it possible to make it save a screenshot for every screen instead of just one? maybe i would have to create a kind of function on the plc that cycles through the pages and then takes a screenshot of each? any help would be appreciated currently using a NB7W and a CJ2 cpu 31 although it would be nice for this to work with everything
  8. Hello guys. I have problem create communication between Omron FQ2 camera and Allen Bradley PLC. Can anyone advise me ?  I set it up according to this manual: ftp://85.129.89.106/Vision/FQ/Communication/EthernetIP/FQ2%20to%20AB.pdf.      
  9. I put together a system a couple of years ago with a L306ERM with I-O, PanelView, etc and I was sold Studio 5000 Lite to program it. It worked out ok on that project but now I have a project that I need to use a Powerflex 525 VFD and the software won't let me add the Powerflex. I've tried several different PFs and none can be added. It crashes at the Create button and puts out the wonderfully descriptive message of "Unknown Error" Email AB support. As of 4-1-21, AB doesn't take emails for Powerflex drives. Anyone know if the Lite version of Studio 5000 will work with a Powerflex 525?Thanks you for looking.

  10. CJ1M con CJ1W-EIP21 a ControlLogix

    Eduardo Juarez posted a topic in CX-Programmer

    Hello I am trying to communicate a CJ1M with a CJ1W-EIP21 Card, with a Logix Control, but I have not been successful, what I am looking for is to read data, from the OMRON and see it in the Logix Control, but I have not been able to establish communication, I am looking for someone You will already have a functional example, with the backups of both PLC'S, to be able to observe how they made the configuration. Thank you for your support Greetings

  11. CJ1W-EIP21 to ControlLogix

    MoonPicnic posted a topic in CX-Programmer

    Hello, Just made this account to get an answer hopefully quickly. I have an existing Omron CJ1M that is talking to a ControlLogix over a CJ1W-EIP21. I don't have experience in configuring Omron PLC's, but the Omron and Allen Bradley are already messaging to each other. My question is how can I get more words to be transferred between the two plc's? There are already 4 words (INTS) being transferred and are working properly but I have used up all the bits and am now needing at least 2 more words. I know in RSLogix 5000 I need to make the array size bigger, but where/how do I do that in CX-Designer? Thank you for any help.
  12. I am trying to connect an Advantys RIO island with a STBNIC2212 ethernet/IP to a Omron CJ2 PLC. I need an EDS-file for the Omron Network Configurator but the Advantys Configuration Software will only export to .xsy for NIC2212 (Ethernet/IP), only way to get an EDS is to substitute the NIC with a NDN2212 (DeviceNet), but I doubt that will work in the Omron Network Configurator. There is an EDS file on the SE-website, but it seems to be a different setup than my island. I thought ethernet/IP should be easy :( Any suggestions? Geir

  13. Plants with many PLCs OMRON

    Ctor posted a topic in Omron

    Hi colleagues, I would like to ask you about companies in whose plants have many OMRON PLCs, such as NISSAN. Thanks

  14. cpu cpm1a

    Tams_14 posted a topic in Omron

    please help me to unlock the password of plc cpu cpm1a
  15. Hello Guys, I would like to know if someone in here has made a VB script, there can delete files from the SD card in HMI? the reason why I ask, is I have some data logging on the HMI for our customer, but I would like the data logging to go in a loop so if the  SD-card is full, it will delete the oldest file instead of stop data logging. who is there somebody there can show me an example on a VB for this :)?

  16. NB HMI and CP1L-E PLC RTC Setup

    SillyBoy posted a topic in Omron

    Hello,   How to SET the RTC of the CP1L-EM40 PLC Using NB7Q-TW01 HMI.   Is it any way to transfer the data of LW10000 to LW10005 (Which is RTC of HMI) to the Auxiliary area of PLC which stores the RTC of PLC ?
  17. Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
  18. Hello! I have a plc program where I need to start and finish an MAM instruction based on a set amount of time. I am trying to calculate the speed of the motor based on the time but when I do, its always off by some milliseconds which I cannot have. I thought this was due to not considering acceleration time but changing acceleration does not change how long it takes the instruction to complete. Is there a more reliable way to perform this? Currently I have my speed units set to seconds which I thought would work (and did improve it slightly) but there is still a slight offset in time. If there is no reliable way to do this, is there a reliable way to predict what the offset in time may be? or what is even causing the offset? thank you in advance. Edit: Or should using seconds work fine, and its more likely something else in my program?
  19. Good day everyone, I recently got NB HMI and program it together with my NX1P2 PLC. I got 2 questions I would like to ask. What I'm trying to achieve is to lock all the button after I start my system or during the pop up screen for confirmation. I tried different methods and it doesn't work. Currently I'm using a direct window Pop-Up screen to cover all the button behind it, but I noticed if I drag the pop up screen, it'll move together. So I wonder, is there any correct methods of doing it? Also, the function key for change screen, I use it for Pop up screen but why it only spawn on the top left of the screen instead of the center? Thanks in advance guys!

  20. NB HMI via FTP

    Robror posted a topic in Other Omron Software

    Hi there! I got a NB with some daily data logs saved in a USB drive. The thing is, I've read about accessing NB via FTP and already tried connecting to the storage folder so I don't need to unplug and plug de USB drive every day. FTP is activated in the HMI but I'm struggling accessing using Windows' FTP function. Connection is okay, I can download the project to the NB from my seat and ping it. So here's my question, have you tried this type of connection? Is another software needed to properly access the HMI? Thanks in advance! 
  21. Hello everyone, I want to indentifying harware of a B&R Automation PC online to diagnose and set an encoder for the B&R ACOPOS servo drive but when I upload or identifying the hardware ,Automation Studio can not find the machine servo drives..If anyone has a similar experiense,I appreciate your help in this regard.photos of this mismatch are attached. Thanks in advance
  22. Hi:         I am planning to use NX with Encoder Card  couple with Omron Rotary Encoder for measuring product length. ( GX-EC0211 /EC0241) or may be (NX-EC0112, I read there is proble with this card , here https://forums.mrplc.com/index.php?/topic/34896-problem-pulse-reading-with-fast-counter-card-in-nx2/ ), but whatever it is I need to know is there any specific Instruction in Sysmac Studio that is tailored for Fast Counter or Encoder (something Like PRV in CX Programmer or special function in CJ-CT021 where start/stop counter and changeable preset counter are available).  The Length measurement is straight forward and is only a small part of the overall program.  Basically is Start ---> measure to length----> Cut --->Repeat again.  I read through the Instruction Reference Manual and I am unable to find one.   Anyone have any idea or any sample program (Sysmac Studio only ) that I can refer to ?    Thanks     
  23. Hi there,  I am considerably new with setting up E/IP on OMRON's NX1P2 PLC. I have been trying to connect a Keyence IV-G to my PLC with E/IP connection (because there's no analog I/O available) and struggling with getting a connection going between PLC and camera. I connect these two through an unmanaged network switch, which I believe doesn't need any further configuration. I have set tags on Built-in E/IP inside SYSMAC Studio, and when I monitor them it says "normally resolved". Unfortunately, it still has red dot which means connection is cannot be established. The error I'm getting is "Tag data link connection timeout". Maybe built-in E/Ip just doesnt work for this case? I have yet to try getting connected with Network Configurator, but have the feeling that it will just accomplish the same thing that I did with Built-in E/IP inside Sysmac Studio.
  24. Hi,     I'm trying to communicate Omron CP1E unit with PC via serial port using hostlink protocol.  I need to read the Timer/Counter SV value and write the timer/counter SV values to the PLC.  I'm able to use other C mode commands (like RC (timer/counter PV read), WC (timer/counter PV write) etc.) but when I give the command for Timer/Counter SV Read 1 which is R#, I get the response as IC (Undefined Command).   How do I write or read the timer SV Values?  Example command and response : @00R#TIMH001028*  (TIMH is the high speed timer, 0010 is the timer number and 28 is the FCS) Response: @00IC4A* Is is that CP1E doesn't support these commands? If so what is the equivalent command that I should send inorder to perform this? Please help.  
  25. Ok, so I was tasked with setting up a virtual for our development team to be able to use to quickly deploy projects hmi, emulated plc, and studio 5000 project together on one virtual.  The main reason for this is when we get a project, many times we have to wait for an available plc.  We have plc’s in our rack but they can’t be used because they are being used for other projects.  I’ve used the compatibility matrix that Rockwell has but my boss wants to stick with Windows 10 Professional like we do in most our projects but according to the matrix, it looks like having FactoryTalk View SE Enterprise version 10, Studio 5000 Logix version 33 and Studio 5000 Logix Emulate version 33, FactoryTalk Gateway 6.11 and RSLinx 4.11 (mainly for communication to the emulated plc) but in the matrix says Windows 7 and Windows Server 2012  is the best choice.  I’ve ran into issues with Emulate opening, it takes up to 20 minutes to open.  Our licenses are on a server and accessed using FactoryTalk Activation Manager and all the activations are there.  Any suggestions would be appreciated.