Search the Community

Showing results for tags 'factory talk me studio 5000'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 250 results

  1. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  2. Hi, is it possible to communicate between the Sysmac studio simulator and the CX-Programmer simulator? I want to test the exchange of data between a NX1P2 and a CJ2H, but I don't have the controllers with me. Thanks and have a great day!
  3. Hi guys, I have a desktop with rs logix5000 activated with dongle and i want to activate rs logix 5000 on a laptop.Those 2 PC doesn't have internet.So I copy in the laptop license files of the dongle in the activation file , I see the available activations in FTA, but the activation in RS doesn't work even if I refresh the server...thx for ur help ! ;)
  4. Hi Guys!   There is a task. I have a motor, and I can monitoring the actual speed. The question is how can I to determine the average speed, if I know just the actual speed. If the speed is zero, it must be ignored. So I have to measure when the motor moves. Anybody have any idea? How can I solve this problem. RSLogix 5000.  Thank you.  
  5. Hi Guys! You can read my problem below, if anybody can help, please do it. Thank you. So, I have 4 knife. You can set the cutting width for each knife separately. The problem is, there is a lot of size. There is an example: No1 size:  #1: 20 mm, #2: 25mm, #3: 30mm, #4: 25mm   (#1=Knife1.......)                                       No2 size: #1: 22mm, #2:24mm, #3: 32mm, #4: 27mm What is make the problem more difficult is There are plenty of type code too. Like X1, X2, X3, Y1, Y2, Y3 ..... This is the main material code. and you can choose the belogging size. So you can select for X1 to No1 or No2 ... but you can select for X2 to No1 or No2 or any sizegroup you want. I can solve it with a lot programming, like deal every possible situation ... but there is a lot time .... :S  There is a touch panel where you can set the values.  Anybody have another idea for this problem ?    

  6. Torque Control

    avfleali posted a topic in Omron

    Hi, For my system I use the functions Mc_MoveAbsolte and Mc_TorqueControl. my problem is when i use absolute function after torque control for zero point. the servo turns the torque point control. For example: Target 1: 200 mm target 2: 150 mm Target 3: 240 mm ( Start point of torque) Taget 4: 330  mm (end of process) Target 5: 0 mm After "end of process" the servo turns  to "start point of torque" Can you help me please    
  7. Hi Guys! I have a problem with data collection. I use RS Logix 5000 software. I need to collect 11 int value. The sampling frequency is about 2 or 3 second. I tried to make an array but I faild, because I dont find what is correct for my task. I need about 5000 sample each of int value. Anybody have any idea about this problem ? If I have the datas then I have to exporting to an excel table . Thank you if anyone can help me.   T
  8. My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.
  9. Hi all, I uploaded SW from working PLC NJ301 1100 v 1.9. Uploading worked, but when I tried to open program, all rungs were empty (see picture). Does anyone know the cause?

  10. Homing servo motors

    scotty134 posted a topic in NJ Series / Sysmac Studio

    Hello everybody, I have a question about homing servo motors. I have a project with new servos from Omron and I would like to know what is the best way to do homing for the servos and how often. Before when we have servos with encoders I was making special homing sequence and was calling by some event. I heard that new servos from Omron pretty smart and remember own position without batteries. So with this 'new generation' of servos what is the key to keep machine robust, easy for motor replacement without useless programming stuff. Regards, Scotty
  11. Hi guys! Can anybody help me? I have an existing controlnet network. How can I connected a new module? Like an 1794 IB16. What should I need to do after I connected the new module? One more question: What's the difference if I do not connected the new module right after the last module, but I connected between already existing module. Then what should I need to configure. If anybody want to help, please write like step by step. I'm a beginner, but I want to imporve myself. Thank you for your help. I almost forget, I need to work with Allen-Bradley PLC, and I have RSLogix 5000 software.
  12. I currently have certain amount of Recipe data located in form of Excel file on to a PC with static IP address. Is there a way to get that data inside the Nj501 without using an SQL server as I currently have NJ501-1300 which doesn't support SQL. I am okay to send data to the SD card I currently have on NJ PLC as it is easy to get data from SD card to the NJ501.  If there is any example code or a link that helps me create i would be helpful. Thanks in advance. FYI: I am currently using NB10 HMI with NJ PLC.
  13. Hi Guys! I have a problem with Motion axis move (MAM) command. There is an Allen bradley servo motor what is working well. But I need to add a new program section, wich is in  a specified moment, the axis should move a certain distance. I think I need to use the mam command, just I dont know how can I configure the motion control part. I need to make a new tag ? or what ? I need to use a user define ? PLS help me.   
  14. Any new tags I add in studio 5000 the HMI project shortcut cannot locate the tags, it says unresolved route to processor. It's the same shortcut all of the other tags are using. Please help. 
  15. This is my first time to the forum and I am still very new to plc programming. I just had to move all of our software over to a new computer ( kind of new) it's running windows 7 pro. The same is as the computer before. Same computer name, same I'm, same file directory. However when I add tags in studio 5000 and reference them in the HMI, it says it is unresolved in route to the processor. It only does this for the new tags. I used the same shortcut and everything so I am at a complete loss here. What do I do.

  16. Struct as FB input

    Alex Teeuwen posted a topic in NJ Series / Sysmac Studio

    Hello,  I am trying to define a struct as an input variable for a Function or Function Block. For example the function AddDelimiter (This is a standard Sysmac function), has a input variable with the variable type Struct, an it is possible to couple a struct to this input (See picture below). If i try to make my own function block with a struct or Structure as an input data type, i get the following error (See picture below). When I try to define a struct from the data types (In this case struct: Test) it doesn't give a error. But when I try to couple a struct to this input, that is a layer deeper than the function block struct i get the following error (See picture below). How can i define a struct as an function/ function block input? Thanks in advance.
  17. OS: Windows 7 Ultimate 64-bit running on VMware virtual machine. Installed software: Studio 5000 V21.0 Licence: Concurrent (served by licence server on another PC). On starting Setup.exe from the VM's desktop I get the message     "Studio 5000 does not support this version of windows" Any ideas how to proceed?
  18. Hello,   I want to do a small scada for Allen bradley plc  on C#. I did a hmi/scada for Siemens S7-1500 plc on C#, it is working and free. I dont want to use Advanced  Hmi. it is looking free but I can not use it in industries as free. so I decided to use direct C#. Do anybody has sample program, code, document, library, link, etc.. about C# and Rockwell plc communication? second solution and question, if anybody has no solution; I may solve it with modbus TCP. but I dont know Compact logix L27ERM CPU support direct modbus tcp protocol. if anybody has knowledge about the modbus tcp protocol document, sample program etc.. I can try to communicate with modbus tcp C# and Allen Bradley.   Thank you in advance. 
  19. Is there any way to establish a variable as min/max value of a gauge on sysmac studio?
  20. Hey guys,   I have worked on the FTView ME platform many of times.  I am now working on a FTView SE (Local Station) application, and I am having trouble connecting an Offline .ACD file to my program so that I can design.   If someone could help me with this it would be greatly appreciated.   Thanks in advance!
  21. I am using an Omron NJ controller and a Cognex Dataman 260 bar-code scanner.   At this point I can trigger the scanner and receive data from the scanner via ethernet/ip. My issue is in converting the response from the scanner to something human readable. The bar-code I scanned reads "872-3GSq".  The results of the scan are located in the variable Dataman_to_NJ[8]-[11]. At some point I know I need to use the SWAP function but I believe my lack of data type knowledge in this system is hindering me. How can I convert the value in Dataman_to_NJ[8] to the string "87"? Any assistance would be appreciated.  

  22. HMI VIEWER APP

    jampc posted a topic in Omron

    Hi recently I have seen Omron Europe and I have download an app for Android and iOS, that app can allow you to remote view HMI types NB,NS and NA9last from Omron). The reason of all of this, is if some body have try this app and also if communication and remote view was creat it. I have try all my best but still can't make it, if some body did it, could you please share it?. Thanks, Jose
  23. Hey everyone first post on here, does anyone know if it is possible to convert a string into a double integer. i am working with a dimensioner and it is sending me its box dimensions in a 12 char string (see attached picture). however i need this data as a double integer (it seems to just take the string length not the string value i have tried both dim_lengh and dim_length.data[0]). i have gotten it down to the point where i have the string split up into the dimensions i need but i dont know how to do the conversion. (box dims for reference are 21 X 15 X 14.8) Thanks in advance, Dr. Brule  
  24. Hello, Does anyone have experience with getting online a NJ/NX via USB with Sysmac Studio running on windows 10? At Omrons website it says Sysmac Studio offers windows 10 support from version 1.15 but I can't find drivers anywhere. Have checked in the communication middleware folder as you can see in the attached picture.  https://www.myomron.com/index.php?action=kb&article=1580 I have Sysmac Studio 1.20.1.0 running on Windows 10 Professional. Its not a big problem for me right now, because I can always connect via Ethernet, but if the driver exist I would appreciate having it.  
  25. Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard