Search the Community

Showing results for tags 'controller not coming online'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 67 results

  1. Siemens Moore Mycro 352

    Hi, I was wondering if anyone knows where I can get the configuration software or the manual for Siemens Moore 352 and 353 digital loop controllers? I would be willing to purchase the software if anyone has a copy. Thank you. 
  2. controller is not coming online with rslogix 5000, but i can ping the ip from the pc. getting the error message says "controller failed to come online - error 701-8004250B" appreciate ur help.
  3. Hello friends I have worked with other series of omron plc but this is the first time I am working with cqm1h cpu51 series. In a factory, 4 of these PLCs exchange data with each other with a clk21 card. After a problem with one of the CPUs and replacement, I was never able to download the datalink settings. I did all the steps in the manuals step by step but I did not succeed. In cx-net software, after selecting online, I selected the data link menu, but as you can see in the attached image, the setup button is never activated. Thanks for guiding me
  4. Hi All, I am a new user to this Forum and definitely a newbie PLC user, so I'm not sure if this is a simple mistake. I am currently trying to correct the logic (of a sensor) on a PLC program to get a manufacturing machine back up and running. This is an issue that I have fixed via PLC several times previously, but for some reason I am having issues fixing it this time. The issue that I am having is that when I try to dig into the Logic of the PLC program (Programming > POUs > Programs > Logic > ...), nothing shows up where there is typically a PLC command ladder. I get the error "No instruction in rung" next to all of the PLC program modules. I am connecting to a Omron NX1P2 CPU via laptop & Ethernet cord. To give you background on my troubleshooting process, I have verified that the I am connected to the PLC controller, by using the Windows Run program to ping the IP address of the controller. After verifying connection, I attempted to connect to the controller using SYSMAC studio. At this step, a troubleshooting window appeared with the issue "Minor fault" "Tag Data Link Connection Timeout". When I look at the Controller Status at the bottom right corner of SYSMAC, it says that I am online and connected to the correct IP address (green circle). Under that, ERR/ALM has a red circle next to RUN Mode. Ignoring the troubleshooting window, I can click Synchronization and "Transfer from Controller". A dialog box pops up and reads "...Controller does not have the POU program source...". Pressing yes to ignore this, the transfer completes. This is where I encounter the issue of having nothing show up within the path of Programming > POUs > Programs > Logic > ... . I have a feeling that this is a connectivity or settings issue, but I am not sure. I have checked my ethernet splitter (D-Link DES-105) and everything seems to be connected and working. If anyone has some insight into this issue I would greatly appreciate any help. Thank you in advance! Best cszikszai    
  5. Remote Omron and Yaskawa control

    Information : On the websites - https://abrysshost.web.app (and https://abrysshost .firebaseapp.com ) detailed information about the construction of remote diagnostics and control (Iot) systems for control systems of objects based on OMRON and Yaskawa controllers. The information is presented in Russian and English.
  6. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  7. Hey Guys,  So i am working with Omron software to integrate it with the HMI screen.  Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it,  the alarm does not go away from the screen,  it is acknowledged though.    Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ??   Please help guys !!!
  8. Hello,  Sorry I'm newbie with omron plc programming. I'm wondering how can i simulate plc program on sysmac studio with Hmi on Nb designer without hardware. because I want testing my program and my plc and hmi connection before buying hardware. Thanks in advance !
  9. I will work on Q2A series Mitsubishi which seems to be around 20 years old. And wondering if I can connect directly to RS-422 (25 pin D sub) (picture below) port on the CPU module? As far as I understand from the manual this port can be accessed only by a Mitsubishi programming module (Q6CPU)? The only alternative I can see from the I/O Devices is that there is A1SJ7QC24 which I assume is used for HMI, in this case I could possibly connect to RS-485 or RS-232C channel (depending which one is free). My question is by connecting to QC24 module would I be able to make my modifications online? Thanks, Tom  
  10. Good day    Can some one tell me , i have a compact logic PLC L36ERM, How can i monitor it online by following the contacts while this add on instruction is in operation ? WHen ever i am online and want to monitor it its greyed out and i cant do changes ? This means i have to go off line and do a complete download after changes    Am i doing something wrong ?   Regards 
  11. Hello Engineers, I  am Will from Levetop semiconductor. Our main product is LCD/TFT graphic controller. Support 8/16-bits MCU parallel interfaces, and SPI, I2C serial interfaces Built-in Ggeometric Drawing Engine: provide Point Drawing, Line Drawing, Curve Drawing, Ellipse, Triangle, Rectangle, Rounded Rectangle Drawing Built-in 2D Graphics Processing Unit: provide Magic Rotation, Reflect, PIP (Picture in Picture), Hybrid Graphics and Transparent Display Built-in 128Mbit Display Memory Support 16/18bits RGB type TFT Panel from 320*240  QVGA to 1280*1024 SXGA Built-in Standard ISO/IEC 8859 Fonts Built-in Two 16-bits PWM Timer Support SPI and I2C Master Interface Three Power Saving Modes: Standby,Suspend and Sleep mode Package: 128pin LQFP We have STM32/ST51C demo code open for developers, function libarary and Arduino Library available, too. Our product P/N as follow: LT7681   640*480   8/16bits/SPI/I2C LT7683+  1024*600    8/16bits/SPI/I2C LT7686   1280*1024  8/16bits/SPI/I2C LT7680A  640*480   SPI/I2C LT7680B  800*600   SPI/I2C LT7680+  1280*1024  SPI/I2C any questions, feel free to contact us   www.levetop.tw/en
  12. We recently added a new analog card to a remote rack that is communicates to a processor rack that has a redundant partner... We made the change when the processor was online, do we need to do anything on the redundant side? 
  13. Please could you assist with the software required to download data tables from 4 off DIRIS A10 Multifunction Meters into TM221CE40R Logic Controller via TMC2SL1 Comms Cartridge using Modbus Protocol over RS485. I have downloaded the Modbus tables from Socomec but not sure how to get these into the PLC. I would really appreciate your help in achieving this. I am using EcoStruxure Machine Expert - Basic to program the PLC & DAQ Factory Developer Release for my Touchscreen. Link to Socomec Modbus tables: https://www.socomec.com/files/live/sites/systemsite/files/SCP/6_gestion_energie/diris/diris_a10/DIRIS-A-10_COMMUNICATION-TABLE_2018-01_DCG01013_MULTI.html#General
  14. Hi Friends,     I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. Feel free to contact me. https://plc-online-training1.blogspot.com
  15. Hi Friends,     I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. https://plc-online-training1.blogspot.com
  16. Omron_control

    Version 1.0.0

    152 downloads

    New app developed - Omron_control for connection Android smartphone and OMRON controllers.
  17. View File Omron_control New app developed - Omron_control for connection Android smartphone and OMRON controllers. Submitter sasha Submitted 08/17/19 Category Utilities
  18. Online edit - Insert Section

    Hello. Is it possible to add SECTION using ONLINE EDIT? I can add rung... Thanks. Best regards.
  19. Cannot get Online - CPM2C

    Hello Ladies and Gents, Im quite new to working with Omron. I am struggling very much to get online with an Omron CPM2C-S110C. It has a CIF01 card also. I hear this PLC is quite an old one. I have referenced the manual on 'connecting a computer running support software' and double checked I have the correct cables. The ones I am using and the way I am connecting is:-   PLC Peripheral slot >> CS1W-CN118 >> XW2Z-200S-CV >> serial to USB >> Laptop Checking on Device Manager, I have all the drivers installed, the comms ports are correctly numbered yet I still cannot connect. There are 4 dip switches on the top right hand side of the CPU and all are swiched off. I have called Omron Tech Support and they said to ignore them in this instance. The RS232C port on the CIF01 is used by a barcode scanner so there is no means to connect through that (I have been told) I feel that I have been through setting and checked in CX-Programmer and nothing looks obscure. Please offer me any ideas you may have. I would greatly appreciate it. Thank you.
  20. Please help find a controller. We require a controller for 8 nema 23 stepper motors. Must have pulse direction and at least 8 axis or more (16 would be nice). Must have kinematics for linear and circular motion. Must be able to use gcode such as G01 X10 Y10 Z10 A10 B10 C10 U10 V10. Must have axis parameters for all 8 axis eg velocity, rotations, etc. We also need the drivers. Must be reasonably priced under $1000 or so. We found Dynomotion KFLOP which can do 6 axis and we kind of made it work for 8 axis. It is super cheap at around $250 plus KStep drivers so under $1000 total with free software, unfortunately, it can not do kinematics for 8 axis. 
  21. Hi everybody I have a elau c400 controller trying to connect it to a mc-4 pacdrive. But I realized that the wd led on my c400 is on and it can be a fetal error. Anybody has this experience? Regards.
  22. i want to connect omron vision controller fh l550 with Soft PLC (IPC) from Siemens  through Ethernet or  RS232c interfaces, should i use a unit for the communication or can i directly connect the Omron Controller with IPC ?  the IPC is connected with other devices via profibus .
  23. Mitsubishi PID controller design help

    Dear all, I need help in design of PID controller in Mitsubishi PLC fx3u, I what should be parameters for initial, and how to start and stop auto tuning.
  24. Hello all, hoping for some help with an issue we currently have. We have a stationary unit provided by an automation company which is controlled by an Omron CP1E PLC unit. We have just purchased and installed the latest CX-One software with key etc as we are aiming to make modifications to the machine. When connected to the PLC via USB the drivers install however we get an error message when viewing the driver properties stating windows is unable to verify the digital signatures. When attempting to connect via USB direct online we get a failed to connect to PLC error.  We have tried updating the drivers but it states the most up to date drivers are installed. Also tried uninstalling and reinstalling drivers. Anyone able to offer any advice? We have no experience with Omron so unsure if there is something we are missing. Thanks!
  25. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?