Search the Community

Showing results for tags 'windows'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 38 results

  1. View File Allen-Bradley Ethernet Driver Library for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1 - ASComm IoT ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with A-B ControlLogix, CompactLogix, Micro800 Series, PLC5, SLC500, and MicroLogix PLCs via Ethernet. Does not require OPC, RSLinx, or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - less than 5 mSec typical transaction time Supports ControlLogix family native tag names Supports reading and writing entire ControlLogix family UDTs and PDTs Supports unsolicited messages Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 10/25/21 Category Demo Software
  2. Dear automation friends,   I just like to put some issue in the clear that I have seen no reported issues on yet, but it is killing me. Maybe some other people in the world also have this issue. We use Windows 2016 on FT View v10. All patched with all compatible patches (both Windows and Rockwell). We install this software a lot but we only got this issue seen/reported on windows 2016. I never had a Rockwell issue that took so long without getting it fixed. Support is also not really helping.   We just have a setup of Windows 2016 with 2x redundant FT View Servers and about 10x Clients with each 4x screens. The HMI clients run perfectly but every few days, 1 application (on 1 of the 4 screens) just crashes "DisplayClient.exe application crash...". That closes the HMI interface and then the users needs to click on the hmi.cli file to launch that screen again. Refering to ntdll.dll in the windows events. No additional info except for the windows error reporting that is unable to contact the internet to send the crash report. Looking in the FT Diagnostics, it happens while the operator is operating the hmi screen. Not when there is no activity.   We reinstalled 1 client completely from scratch, including the OS, domain integration, everything brandnew. And 10 hours later: crash on 1 of the 4x screens. In a control room with almost 30 screens, this is very annoying and unacceptable.   If you have a similar issue or got the issue fixed, please let me know. If you have a similar issue and don't have it fixed, we can share more detailed logs.   Best Regards,
  3. So, our plant has Proficy iFix 5.8 running on a handful of Windows 7 VM's, which, form my understanding, are running 24/7. However, since before a got here, they have had an issue where iFix will crash usually every couple of months, leading to screens and panels not looking right and freaking out everyone at the plant, and we reboot the VM. Apparently, we have always tried to reboot them every 3 months or so. Long story short, this is a difficult thing to organize at our plant. I would prefer to know why this is happening in the first place and try to fix that problem if possible. I was wondering if anyone else has experience this type of issue or may have any idea why this happens or if this is normal. I can barely find anything useful pertaining to iFix, online. I have attached a pic of what I see in Windows event viewer before rebooting the VMs. This is what mostly caught my attention: Faulting application name: CONMGR.EXE, version: 5.8.8255.0, time stamp: 0x5240ee18 Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2be1e I haven't been able to find anything concerning Connection Manager either. Any information is appreciated
  4. CX-One for Windows 11

    CX-One is currently listed as incompatible with Windows 11. Does anyone know what Omron's plan is with this? Apparently our IT is upgrading everyone (regardless of their job function) to Windows 11 after September. If there's a problem then I will have to argue with them to keep my Windows 10 laptop after September. Fun times.
  5. View File GE SRTP Ethernet Driver Library for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1 - ASComm IoT ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/05/22 Category Demo Software
  6. Version 1.4.4

    15 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  7. View File Modbus/TCP Client Driver Library for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1 - ASComm IoT ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with Modbus/TCP Server devices via Ethernet.  Does not require OPC or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports Modbus functions 1, 2, 3, 4, 5, 6, 7, 11, 12, 15, 16, 17, 20, 21, and 24 Address mode support includes: Zero-based, One-based, Modicon 5-digit (1, 10001, 30001, 40001), Modicon 6-digit (1, 100001, 300001, 400001) Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 05/18/22 Category Demo Software
  8. Version 1.4.4

    37 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with Modbus/TCP Server devices via Ethernet.  Does not require OPC or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports Modbus functions 1, 2, 3, 4, 5, 6, 7, 11, 12, 15, 16, 17, 20, 21, and 24 Address mode support includes: Zero-based, One-based, Modicon 5-digit (1, 10001, 30001, 40001), Modicon 6-digit (1, 100001, 300001, 400001) Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  9. Version 1.4.4

    22 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with A-B ControlLogix, CompactLogix, Micro800 Series, PLC5, SLC500, and MicroLogix PLCs via Ethernet. Does not require OPC, Siemens or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports reading and writing entire UDTs and PDTs Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  10. View File Siemens S7 Ethernet Driver Library for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core. - ASComm IoT ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with A-B ControlLogix, CompactLogix, Micro800 Series, PLC5, SLC500, and MicroLogix PLCs via Ethernet. Does not require OPC, Siemens or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - 5~10 mSec typical transaction time Supports reading and writing entire UDTs and PDTs Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/13/21 Category Demo Software
  11. Version 1.4.4

    38 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with A-B ControlLogix, CompactLogix, Micro800 Series, PLC5, SLC500, and MicroLogix PLCs via Ethernet. Does not require OPC, RSLinx, or 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux & Android Extremely high performance - less than 5 mSec typical transaction time Supports ControlLogix family native tag names Supports reading and writing entire ControlLogix family UDTs and PDTs Supports unsolicited messages Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  12. Hey! Is there any possibility to acces the PLC variables in GXWorks from another program? Like I want to read and write the I/O-s or Merkes in the Mitsubishi PLC from another program Could someone help me with this? Thank you!
  13. GX Developer/FX2 Problems

    Good Morning Everyone I have a problem that I do hope someone can help me with. My work laptop is used only for PLC and VSD(Vfd) configuration. It is an aging Lenovo running windows XP and it has GX Developer, GX IEC and a few of the Mitsi configurator tools and Mitsi FX configurator for VSDs. I bought a couple of new VSDs and got a copy of the new FX2 for configuration of the VSDs. I installed the FX2, used it configure 2 VSDs and that was it. Yesterday I tried to use the GX Developer to make a few changes to one of our A series PLCs and could not get it to load. On loading, the first windows info block says "System Stop Failed. Please restart Windows" if I click the OK button the next info block states "Operation Ended Incorrectly. Restart the application" If I click on the OK button it appears to load, however when one selects the Project to open it crashes and comes up with another info block " Gppw.exe has encountered a problem and needs to Close." As we were a little under the pump to get the changes made yesterday I did unistall the FX2 program, this did not fix the problem. If anyone could shed some light on a fix for this I would appreceiate it. Thanks in advance.  
  14. Hi guys, So, I'm having an issue installing GX Developer on a 64-bit Windows 10 Laptop, the primary installer opens, at 99%, then disappears and the process eventually dies, I've exhausted all available compatibility options, does anyone have any advice?
  15. Good day to all, I am trying to establish DDE communication between my PLC (1769-L23ER) and MS Access via RSLinx Classic Gateway (3.9) over Windows Server 2012 R2.  On my developing PC (Windows 7), there isn't any issue at all. But when I port the codes over to Windows Server 2012 R2, MS Access is not able to establish DDE communications with the PLC.  I was wondering what went wrong. The error message from MS Access is "MS Access can't find the specified application and topic because it can't open the DDE channel, err.Number is 282. The code for getting the channel is as follow OpenRSLinx = Application.DDEInitiate("RSLinx","PLC-D") I was wondering was there anything I have miss out. eg. Configuration of the server, path settings, etc.. Any help is welcome. TIA Cheers CY
  16. FX-USB-AW

    Hi Does anyone know of windows 10 drivers for the FX-USB-AW or if not best way to connect to it without using ethernet.  
  17. FX-USB-AW

    Hi Does anyone know of windows 10 drivers for the FX-USB-AW or if not best way to connect to it without using ethernet.  
  18. HMI GOT1030 Windows Screen

    Hi, I am currently working on window screen. I don't know how to disable function of closing the window (see attached red screen). The window screen is showing by pressing button on input. My settings are shown on the screens below.  
  19. OS: Windows 7 Ultimate 64-bit running on VMware virtual machine. Installed software: Studio 5000 V21.0 Licence: Concurrent (served by licence server on another PC). On starting Setup.exe from the VM's desktop I get the message     "Studio 5000 does not support this version of windows" Any ideas how to proceed?
  20. Crimson 3.0 and Windows

    Hello all, I am using a g10 graphite series HMI from Red Lion. I am trying to figure out a way to have the device use the operators windows logon by calling up the windows security services. Basically a user would have to log on to the HMI with his windows credentials to be able to do anything. I vaguely remember being able to set this up in FT, but FT seems to have a lot more features than the crimson software. Thoughts? Ideas? thanks guys.
  21. Dear All, In one of my projects I need to login in HMI via Windows Linked Users i.e. Domain Users..I have never done this before & don't I have any sort of idea regarding this..This is possible in Rockwell HMI's but not sure about Beijer IX HMI's.. So if anyone has done this pls do let me know.. Thanks, Krishnakumar Mishra  
  22. Hello, Does anyone have experience with getting online a NJ/NX via USB with Sysmac Studio running on windows 10? At Omrons website it says Sysmac Studio offers windows 10 support from version 1.15 but I can't find drivers anywhere. Have checked in the communication middleware folder as you can see in the attached picture.  https://www.myomron.com/index.php?action=kb&article=1580 I have Sysmac Studio 1.20.1.0 running on Windows 10 Professional. Its not a big problem for me right now, because I can always connect via Ethernet, but if the driver exist I would appreciate having it.  
  23. Hi all, I need your help on Factory Talk issue, also for Factory Talk Transaction Manager, I suppose is the same reason.  Windows 7 - 64 FTV SE 7.00.00 FTTM 10.10 I'm Windows administrator. ****************** Factory Talk Issue: Error message: (Error:0x800706ba) Error Failed to load VBA project display cannot be opened at run time. (This is the error to open the first display). Message from Rockwell knowledge database: Error in the OS event viewer mentioned domain controller cannot be accessed to authenticate user. ***************** FTTM Issue: Can't Start with Services. Error message: The Services could not be validated using the specified username....
  24. GOT HMIs Windows Based?

    GOT Experts, Any one know if the Mitsubishi GOTs are windows based?  I am thinking I have seen thaat they are but can not find where I got this info from,   Thanks a million,
  25. NB Designer V1.4

    I found NB Designer really struggled running on Windoze 10 Pro x 64 bit - bloody painful to be honest - on both the massively fast desktop and very fast laptop - no time to wait around - likes my horse power. Selected it to run in Windows 7 compatibility mode - way better - quite nippy actually. Highly recommended - it appears the NB Designer team may have not quite caught up with the latest Windoze OS.