Search the Community
Showing results for tags 'time module'.
Found 96 results
-
The CC-Link system on a machine has been intermittently dropping out. Normally the Link Scan Time runs at a solid 87ms. When the system "drops out", the link scan time will increase. Sometimes double, triple, or go up 10x. It happens when the machine is running or when it sits idle. There are 33 stations on the network. The same stations do not always fault but sometimes all of the stations will fault at once (as seen in the attachment pictures.) We have changed the main QJ61BT11N, the processor, the Q62N power supply, the main backplane (base unit), all cards on the main backplane. Is it possible for one station or one of the cables to create a network wide problem? Any ideas thrown at us would be appreciated.
-
Hello all, Thanks for the forum which has provided me with a lot of help overtime. I'm posting my first thread since I can't seem to find an answer to my issue. I'll quickly explain the situation: I'll be installing a RTD sensor to a GE Fanuc IC200ALG264 analog input module using a 4-20mA converter. Everything is fine except I can't seem to understand the polarities of the Fanuc inputs. I'll explain better: the module has an IC200CHS022 for the terminals, 15 terminals total, and the manual is reporting a "number" and a "connection" for each terminal. Now, the "number" seems to correspond to the visible pin of the terminal. But the positive and negative symbols are represented on the "connection", which I can't seem to wrap my head around what it means. Attached are abstracts from the manual and a photo of the terminals. Please tell me where to connect positive and negative outputs of the 4-20mA converter. Thank you. Terminals Table Terminals drawing Terminals photo (front)
-
Hi all! We have a problem with a Mitsubishi system. After switch off the machine in home position and back on, it resets the servo encoder value to 0. I checked the servo parameters, and the Absolute encoder is enabled, the ext. battery is ok and no zero reseting in the program ( I think...). Is there a parameter I should check or some setting in the intelligent module? The system consists Q01CPU, QD77MS2 im., J4 200B amp with 6v battery, and HG-SR152 motor.
-
[Tutorials and Quickstarts] - Setting the NB Clock based on the NJ NX Clock
Michael Walsh posted a topic in Download Comments
Setting the NB Clock based on the NJ NX Clock View File This document details the updating of the clock on the NB based on the clock in a Sysmac Controller. Submitter Michael Walsh Submitted 05/14/20 Category Tutorials and Quickstarts -
Setting the NB Clock based on the NJ NX Clock
Michael Walsh posted a file in Tutorials and Quickstarts
-
Hi all, I am trying to set up a PID loop for a project I'm working on, and I was hoping someone could take a look at it for me. Most of what is written comes from the Q, L programming manual, but I've changed a few things so that the program can write changes to the SV as needed. The processor is a Q03UDE and the Analog Module is a Q64AD2DA, using only channels 1 and 5. Thanks for looking! PID Project.gxw
-
So I have done quite a bit of googling and i even reached out to our integrator but i am having a nuisance fault of "Watchdog Fault" Caused by periodic task overlap. The task is scheduled to start again before it is finished. I added all of the Programs in this task MAX scan time and it only came out to 102 ms. the task is scheduled for every 100 ms. The watchdog is set at 500 ms. The task is currently running at 146-148 ms and i confirmed this using a TON instruction at the end of the task followed by a reset. What can i do to get this down?? What would be the best practice? Move programs into another task? Make the task continuous? What would happen if i did make it continuous? I tried setting the task to 150 ms and the controller DID NOT like that. I was barely able to get back on line with it to change it back to 100 ms. CPU usage is at 91% and this task accounts for around 50% of that. Thank you all in advance for your help.
-
We are having issue on a machine running kinnetix 5500 drives where we randomly get clock Sync Faults. This particular machine is set up as a slave looking to another PLC(L36-ERM) on a different station of the same machine as the time master. There are about a dozen other PLC's(totally different machines) on the same network and most are set up as masters for their own systems and to my knowledge they have never had this issue. There are also dozens of other devices connected to this network, and then this network is part of the facility wide network.( I apologize if this is a little wordy) We are pretty sure that the slave is finding a more accurate clock on the network somewhere and syncing to it causing the servos to fault. We have tried making both the master, and the local clock of these 2 particular PLC's higher priority than the others to eliminate this with no success. What I am trying to do is track what clock this particular slave is looking at as its master when the clock sync fault has occurred. is there away to do this through ladder logic? it seems like we should be able to get this information and save it so we can figure out who the culprit is.
-
Time synchronization of L71 via 1756-TIME
Arizona posted a topic in Allen Bradley / Rockwell Automation
Hello Everyone, I am new at this forum, seeking help from you guys and gals. Scenario: I have a Controllogix 1756-L71 5570 controller installed with 1756-TIME module. The function of time module is to take time from GPS clock module in NTP format and send it to controller in PTP format. All the status LED's on Time module are OK. Also sync LED is Green. Still the time of controller is not synchronized with GPS clock there is a difference of 45 mins. Fellows please help. I'll be helpful. -
Does anyone know how to reset the "Maximum Total Observed" CIP Connection statistics on a EN2T or a L83 Processor?
-
Hi everybody,For a while I’ve been wondering, in every plc forum where the use of loops come to discussion I find most people answering that it’s best to stay away from them and that there are better, easier and mostly less scan time demanding solutions out there. Why is that?In my experience they’re the next best thing.Why would referencing data from an array of 40 Dwords using a FOR X:= 0 TO 40 DO loop be any more scan time demanding then the PLC scanning through 40 rungs of statments?Just curious if I’m missing something here. Cheers
-
Has anyone had any issues with dirty power or disturbances from Utility that occur duration the night?
-
Hello, I used a Schneider Electric SR3B261B PLC to create a trivia machine (as I call it). Basically 20 buttons that let contestants ring in to trivia. There is a display that shows the number of the person who rang in. It works pretty well unless people press the buttons at exactly the same time. Then it shows 2 results at the same time. Usually resulting in a display of 18 when really it was 12 and 14 that rang in, for example. The PLC has options for: "Adjustment of the basic cycle time of the module." and "Type of Hardware Input Filtering." Which I assume would make the PLC operate faster and avoid two inputs triggering at the same time. If I change the setting and update the changes do not keep. I appear unable to change it past 20 x2 ms and slow (3ms). Is that a correct assumption that changing this would fix it? Why can I not change this? Is it because I have so many inputs (14 or so) and Outputs (16 or so)? or because my program uses nearly all 240 lines of ladder logic allowed? What can I do to fix this? Emerald
-
Trying to program production tracking in Do-More 2.3. Need to track current Date, Time of day & current hour. Anyone have an example of how time of day is used? I have done this in Allen Bradley 5000, but this Automation Direct stuff is new to me.
-
Please let me know if it is allowed to sell PLC hardware on your forum. I accumulated lots of Omron hardware that I want to get rid off. Here is the list, I have several of each type, asking $12 each plus shipping. All in working condition. Base Unit C200HW-BI051 Base Unit C200HW-BC101 16 Point DC Input Module C200H-ID212 16 Point Digital Output Module 24VDC C200H-OD212 Power Supply Module C200-PA204
-
Micrologix 1400 recording off time of a DI
Ryandevlin17 posted a topic in Allen Bradley / Rockwell Automation
Hi, I'm pretty new to allen Bradley and wanted to know if there was a function that could help me out. I have a rotation sensor which feeds back to the PLC via a digital input, once every half second or second once machine is up to speed - I want to record the off time of this DI (how long it is off between pulses, essentially how long it takes for drum to rotate once). Is there some way to record this time and use this value for compare logic? any help would be greatly appreciated. PLC: Micrologix 1400 series B RSLogix 500 version 11.00.00 (CPR 9) -
I'm very new to sysmac. I am trying to display the current date and time in the corner of each of my HMI pages. I saw a button labeled date and time. It is asking for a variable for behavior. Do I need to write some basic structured text or FB in plc to get date and time and pass it over? I figured the button would update itsself since when I placed it on the screen it had the current date and time and refreshes every time I leave the page and come back.
-
I would like to capture current date and time to registers in the PLC. I would prefer to use a function block, if possible, since I need to do the capture at different places in the program. I am using a CJ2M. How can I do it?
-
Dear all, the following error happened with me as following 1-power cut happened 2-rack with DO wasn't working "meaning no DO on plc module or from PLC but from function was active & some DO was blinking very fast" action I took 1-after more try change address for DO module from H/W configuration with spare DO "using Rewiring Option" worked well but I face the following error "i don't if problem was new or related to last action' error on counter module FM450-1 I/O access error and error on FC40 "System function for counter module" no change in H/W wiring in field was done any one need more data can ask DO & FM not on the same rack CPU416
-
PLC-5 BTR setup screen for manalog input module
jrsiscool posted a topic in Allen Bradley / Rockwell Automation
HI I'm using PlC5/20 when I click on setup screen on the BTR block (to view the analog input configuration) i find the following message: No modules exist in the IOconfiguration for this R/G/M however the analog input signals is running properly....i just want enter the setup screen for configuration. I'm assuming that I need to enter I/O module in the I/O configuration? Can I do this without taking PLC to Program mode? -
Hello. this is my firs post is possible to convert the elapsed time of timer to real or int i need to make some math operation with the elapsed time thanks
-
There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf -
please can anyone tell me how to set A1S68DAV analog output module parameters , such as voltage output and resolution? or is the parameter can't be set at aLL (ie, fixed at -10V to 10V)?
-
Hi guys, I am trying to make a controller for an oven using MODBUS with a CP1L and an NB screen. My oven program will have 10 stages in one baking cycle, and the parameters for each stage can be modified individually (temperature, blower speed and time). I have set my number input in the NB screen to be a unsigned int of 2 integers and 2 decimals, and it writes to H4 in plc H memory. I move this value from H4 to W4 in the PLC, and input W4 into a timer (T0000). I have tried data manipulation and still have no success in getting this to work properly. My CP1L timer is set to BCD mode, as I am using premade MODBUS function blocks which are programmed with timers in BCD mode. Does anyone have any pointers regarding this? In the screenshot provided, the number i inputed in the HMI was 60.00.
-
Hello, Completely new to Mitsubishi PLCs and I need to use a date and time stamp for data collection purposes. We have a Siemens PLC as well and this has the data type "Date_And_Time" which is what I need to replicate. I have been attempting to write my own data type but am struggling with how to go about this as it is not straightforward and I cannot find anything about how the Siemens Date_And_Time is made up so I have nothing to go off. Does anyone have an example of a data type they have made that is the same? Or is there a data type which does this already in GX Works 2 that I just can't seem to find? Please help!
