Search the Community

Showing results for tags 'need help for cx-supervisor push button action'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 36 results

  1. Reset button with structured text

    Hi! Pls program: When you bush the safty button on/off.  You must bush the reset button to make the pls-program function again.  Q: How do I program the reset button in structured text (cx-programmer) ?        
  2. CX-Supervisor Version 3.50(7) on Windows 7. I've just had a vendor add a function to a HMI. It's a single button to save the recipe and it's near the bottom centre of the screen. Sometimes it works. Sometimes it works if I slide my finger around on it. Usually it doesn't work. It always works if I use a VNC viewer and press the button remotely. The PC has two touch monitors (on VGA splitter). Both monitors have the same problem. If I run PBrush (Paint) I can draw all over that area of the screen without missing a pixel. Has anyone ever seen anything like this before? And, more importantly, how did you fix it? Thanks.
  3. Hello, I am trying to have single press and double press etc. functionality in my PLC program where for example, single press will turn on the motor whereas double press will turn on the motor for 5 seconds. Is it possible to achieve using ladder logic in sysmac studio, if yes, how? Thank you in advance.
  4. FWRIT(701) To Memory Card

    Hi Can anyone please help with the following issue. Equipment  PLC - CJ2M-CPU33 Setup is being used to log distance measurements from a conveyor belt to a compact flash card in the PLC I have successfully set this up and it is working by writing values to a stack then when this is full, changes stack and writes the data in the previous stack to the card. The FWRIT command has the control word #3D00 (Comma-Delimited, Return every 16 fields, Append, Memory Card) The problem I am having is with the data in the CSV file, I am logging typically 300K lines with 16 values.   Towards the end of logging the data in the CSV file will start to return every 5 values instead of 16 which is just painful to re-format. I have attached an image of the Excel data to explain better. My Two stacks are  Stack 1 - E0_0   -   E0_16003 Stack 2 -  E0_16010   -   E0_32013   Thanks for any help.
  5. Hi, according to the manual one should reduce points by using the bitwise operator on an integer instead of making a point for each bit. I have tried making a test page with several squares and made a colour change action using Testword & 0x30, but the result seems quite random. 0x03 don'seem to work either.  I also tried making a script to load the bits from the PLC into a bool array and this action expresion: TestBool[3]  and even using "Rectangle_3.colour = red" in the script. This last attempt worked OK for the first two bits, but no response for the rest. Now i'm running out of ideas :( Is this a bug or a limitation of the educational version? Anyone have a solution or a workaround? Geir  
  6. Latch switch

    Hello  I'm quite new with GT Designer 3. I'm writing code for the GOT2107 HMI. I have a few push buttons that works fine when pressed the switch lights up as you touch the switch. But now I want a latching switch. Every time the switch is pressed the light on the switch should alternate. How do I get a switch's lamp to stay on after pressing it?   Thank you Marinus
  7. I have a legacy application with [PRINT] buttons on many of the screens. The screens are very simple with text and boxes as frames around the text. The [Print] button calls the CX-Supervisor script: where FALSE suppresses the print dialog. Figure 1. One of eight of the temperature control boxes. I have upgraded to CX-Supervisor 3.41 Developer and Runtime for a couple of modifications. Now when we print the text comes out OK but the graphics (the boxes) are about eight times the correct size and overlay the text. This happens when printing to the printer and to XPS. Figure 2. The eight temperature texts and the giant boxes on an A4 XPS file. (It's the same when printed directly to printer.) Has anyone seen anything similar? Is there a fix? Many thanks.
  8. CP1H Communication HElp

    Hi - I had an old lab PC running software made in CX-Supervisor to control equipment attached to a CP1H (I did not make the software).  The CP1H connects to the PC with a RS232.  The PC running the software died, but I have the files copied onto a new PC.  I have installed the latest CX-Supervisor software, when I open my program file from the old PC I have a communication error (attached).  Where do I setup the new PC to communicate with the CP1H? Thank you
  9. Hi everyone, Using Cicode programming ... I'm try to make a function empressed Button's input command that still running forever until the user press the Button again .. so if i press the Button at first the function inside Button will be running , But i wonder to terminate that function by press same button second time or don't mind if you suppose other Button for stop running the function ... plz help to make a code or something else to stop running of my function.
  10. Hi Guys I was wondering if any one of you could tell me how to set up some basic button functions? I need a basic instruction on how the followering button setup, could be done on the HMI, preferable with exaples or tutorials etc. !!! I´m working with the current setup: NX1P2, using Sysmac Studio, Module version 1.25.1.0, along with a NA5-Terminal, version 1.18 !!!  START_VALVE_1_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_1_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 1 mode, or deactivate the mode). START_VALVE_2_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_2_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 2 mode, or deactivate the mode). ON_BUTTON = Toggle, Momentary, Set or ?? - (Need the OK_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed). OFF_BUTTON = Toggle, Momentary, Set or ?? - (Need the ON_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed).  !!! Hoping to hear BACK from some of you VERY soon, because I need the know_how ASAP. !!! !!! Write soon !!!
  11. CX-Supervisor Developer 3.41 on development laptop. CX-Supervisor Runtime Only V3.4.1.0 on machine HMI. SYSMAC Gateway V1.7 on machine HMI. Following on from http://forums.mrplc.com/index.php?/topic/35136-cx-supervisor-developer-no-plc-point-data-when-testing-runtime/: Developer V3.4 generates .SR3 files rather than the older .SR2 files. After my Runtime upgrade neither the old SR2 program or the new SR3 program seem to communicate via the SYSMAC Gateway which is running (and passes the comms test) on the HMI. It works on the development laptop. Has anyone got any suggestions?
  12. I've added users in CX-Supervisor Developer, built and copied the SR3 file over but the new users don't travel with it. (I didn't think they should be embedded in the project file.) How do I transfer the user accounts from Developer to Runtime?
  13. I'm an experienced PLC / HMI developer but not very familiar with CX-Supervisor. I'm modifying a program with CX-Supervisor Version 3.41 and all is well until I try to test it. The runtime builds and starts but the PLC point data is all zeros. I'm developing on my laptop, plugged into the machine network where the HMI is running the previous program version. Can my modified program talk to the NX701 PLC while the HMI is talking too? Is there some trick to starting the Developer Runtime that I'm missing? Many thanks.
  14. Trying my luck to ask here, if anyone can help :D So I've started using CX-Supervisor v3.41 and found a very odd problem with the color palette, as shown in the picture below. As you can see, the palette size is abnormal that the Color Selector button is not visible anymore. This window is also not sizeable, so I cannot do anything to fix it. I never encountered such problem with v3.24 before. I confirmed this is not a screen resolution problem either since I've tried to change it. Anyone encountered same issue perhaps? Maybe someone know a workaround? Thank you
  15. I'm modifying an existing application and need to expand some recipe arrays. Runtime is throwing an error on the last element of the original array (elements 0 to 137 and I have expanded to 199). Is there any way to add a breakpoint into the code to see what's happening? How does anyone else do it? Many thanks.
  16. Hi  How can I log the user action  at citect scada 2016 v8.0  I wan to log what the user done on scada like alarm acknowledge, disabiled or eneblied, enter any new valu of signal... ect..   Any Help Will be great  Thanks from now  Best rigards.
  17. Dear All               Could you people help me to solve this issue. I need a Function in cx-supervisor with Push Button.I want Bit ON, when I pressed the button, and when I release the button then this bit goes OFF. Sorry for my bad English its not my native language.
  18. Is there something to open a message box with confirmation (Yes / No) when the operator click on a button, like in cx-designer Or do I have to code it in Vb.Net Thanks
  19. Hello, Thank you for giving me the opportunity to join your awesome community. I am pretty much a beginner in using more than one PLC so please bare with me. This is my problem so far, I have four C1JM PLCS with no Ethernet port built into them BUT I also have four serial to Ethernet converters (MOXA NPORT 5110) and a switch. I want to make a small control room so that I can control all of the PLCS from a single PC using CX-Supervisor. My problem is that i don't know how to make a network between the four PLCS and the PC and how to configure them on CX-Programmer and CX-Supervisor so that i can control all the four PLCS from one PC.  Your help will be much appreciated. Thank you in advance and have a nice day :)
  20. The production environment has had a CX Supervisor package running since 2006. the internal computer finally bit the dust... We have managed to install XP on another PC. Supposedly it was all installed correctly off site and tested to run OK offsite. When connected to the (PLC) machine CX-Supervisor [v1.33] gives an error 1007. Probably its an communication error. It seems that the back-up runtime version (sr2) was CX Supervisor v.2.1 from which we don't have a hash dongle. We only have a v1.3 version.   According to the omron helpdesk, the only thing we can do to test the connections , is to install a v2.x trial version with the .sr2 file. There is no need for a usb-dongle in a trial version and it wil only work for 30 days. That would be sufficient for us, because the repair of the build-in system will take about two weeks. For now a complete production-line is out! In short: We urgently are in need of CX-Supervisor v2.x trial installation package. If anyone knows where to find it, it will be appreciated. 
  21. Is it possible to use an older version (rs2) from CX-Supervisor v1.33 with a new install of CX-Supervisor 3.x? regards, Richard
  22. CX-supervisor

    I want to send data from internet to cx-supervisor via cx-supervisor website but error. i don't know how to resolve this problem .I attach photo below, people help me with
  23. hi guys, i want to ask about cx supervisor development 3.0. i have problem with my cx supervisor. my cx-supervisor cant run, but can built succesfully. my cx supervisor 3.0 development version, my cx supervisor problem like this. do you have solution ?thx for attention,sorry for bad english best regards
  24. CX Supervisor Modbus RTU

    Can CX Supervisor be used as modbus RTU master using RS232/RS485 or USB/RS485 converter to connect it to PLC or panelmeter or other modbus slave units and how? Any example? Thanks in advance Goran
  25. Hello Guys, I Need some information about conncting method between cx-programmer and cx-supervisor? Anyone can explain? Please help me! thank you.