Maqsood

Thank you very much

Is their any method like virtual port adding to advanced HMI and cx programmer to view input and output from advanced HMI to Cx-programmer.?    

Dear All               Could you people help me to solve this issue. I need a Function in cx-supervisor with Push Button.I want Bit ON, when I pressed the button, and when I release the button then this bit goes OFF. Sorry for my bad English its not my native language.

Please help me to find out this plc circuit diagam with full component detail

Thank you very much for your support. it is really very helpfull.

Dear all Please identify me i am having one Issue in my PLC.When I changed the IP of my plc then suddenly its showing error ERH its mean IP address wrong but  My CPU setting is same like previous means unit no=0, x16^0=0 ,Node=x16^0=1  and IP is 192.168.0.15 Mask add.255.255.255.0. but when I, transfer to PLC (in Program Mode) its not transferred(Failed to Transfer) please rectify me where I am doing wrong.

Dear all I am new please help me to find out how i can do electrical connection plus control of softstarter ATS48C48Q Schneider brand.I am using this softstarter for 200kw motor heavy duty.i need control this motor beacuse it is taking high torque at starting time.

Help to find out specification of analog card AD-081-V1 . please suggest me this analog input card is active or passive?.

I found formula for Solid flow measurement: Q = (WR)            L Q = flow (kg/min or lb/min) W = weight of material on section of length L R = conveyor speed (m/min or ft/min) L = length of weighing platform (m or ft)

Help me to find out how to calculate solid partical flow rate on Conveyor belt.I have CJ1M-CPU11 but it don't SUPPORT PRV ,CTBL COMMANDS. Guide me  other way how  to do it with same PLC CJ1M-CPU11.  i have cj1m-cpu11 but it dont support prv ctbl commands

Thank you  it is very helpful for me.....

Dear all  I am having trouble with calculation  of PPR to RPM. I am unable to predict the right answer to monitor rpm of motor speed, actually I am using the proximity sensor for getting pulse per revolution.I have 4 pulses per revolution.Motor is connected with mechanical gear the gear ratio is 13:1 and motor speed is 1480.sensor is fixed after gear output.

Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.

HI, Dear i want to show  ampere of motor through  fins ethernet can you guide me how to  read data from plc through ethernet connection. i have cpu cj1m  cpu11  

Thanks for all