Search the Community
Showing results for tags 'nb designer sysmac'.
Found 315 results
-
Hello everybody, i'm using sysmac studio and i'm new with the program. I want to use the ladder tools to describe the influence of the valves on the temperature and the flow. Can somebody help me how to do this? and where to start? The requirements of the project are: Valve TCV 35.01 is a temperature valve: u can control the outlet temperature of the water flow. 100% = 2 degrees celcius and 0% = 20 degrees celcius. Valve LCV 35.01 is a level valve: u can control the outlet water flow. 100% = 50litres/hour and 0%=0litres/hour. In the appendix u can see a view of the proces.
-
-
[Manuals, Tutorials] - E-Designer_for_E-series_English.pdf
CJ2M2016 posted a topic in Download Comments
E-Designer_for_E-series_English.pdf View File E-Designer_for_E-series_English.pdf Submitter CJ2M2016 Submitted 09/09/17 Category Manuals, Tutorials -
How Reading Analog Data in Slave Module EtherCat
CesarHDz04 posted a topic in NJ Series / Sysmac Studio
Hi Everyone! I try to read Analog Data in PLC Master through Salve Module (ECT-21) but i dont see any data, with an Digital Module i can read and write, but with analogic module i can't do anything. The analog module works perfect, i have 4-20ma Simulator and work fine. Modules: PLC: NJ501-1300 Slave: ECT-21 Analog: ADO81-V1 Can u help me? Regads.. -
I was looking for what drivers that should be used when connecting the new FX5U plc with the older E-1000 series (E1100 in this case) in e-designer 7. Intended connection method is ethernet on the FX5 (obviously) to Ethernet on the E-panel. I am sure this question will come up for several users so let's keep this thread as clean as possible. Has anyone done this Before? Here are the options available: /Niklas
-
Hi All, I have a requirement from a customer to acknowledge alarms from either of two NS15 HMI's in the system. Can anyone provide info on how I may be able to acknowledge or delete alarms on one HMI which would also acknowledge or delete said alarm(s) on the second panel? Both of the HMI's are polling one controller for alarm status so I assume that each time an alarm is acknowledged or deleted it would have to alert the controller which would then send something to the second HMI to clear the alarms? Any help is appreciated.
-
In Sysmac Studio, is there a way of addressing Array of for argument sake 100 INT. For ex: TEMP[array 0..99 of int]- AT %W0 If I do that will TEMP[1] be %W1 or I cannot address array. PS: I am currently using NJ501-1300 and Omron NB Screen. I am reading/writing total of 450 variable all comprise of either INT or WORD. I would like to group them together for easy access and keeping my variable table neat. Is there a better way of doing this. Any help is much appreciated.
-
Hi. ¿Is there a way to use indirect addressing on a NA Panel? I need to use a motor operation template for several motors and i think is not very smart doing the same panel over and over. I have always created a screen and then reused it (on FactoryTalk View, Intouch, Schneider Vijeo) The problem is that we don't find any article about indirect addressing on NA panels. So we dont know how to do it. On CXDesigner we used DM addressing so we could use a template instead of creating many button panels when we need to operate a motor, for example. Its like when you use indirect tags on Intouch or Parameter files on FTV. I fear that indirect Addressing is not possible, but in that case ¿Which method do you recommend? ¿Got an example or an article mentioning it? Thanks in advance.
-
NX-EIC202 Utility View File A nice little utility created by PMCR that calculates the power consumption for NX I/O, provides the I/O layout for a given allocation, creates symbols for use in CX-Programmer and aliases for use with an RSLogix5000. Submitter Michael Walsh Submitted 09/22/16 Category Utilities
-
I am using the NS series touch screens and NS-Runtime. Do they have a System word that stores the IP address of that touch screen or PC running the NS-Runtime application. I want to be able to trigger different functions in my project depending on the IP address.
-
hi could you help me to find sysmac studio network configurator? from where i can start it?
-
I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!
-
Hi all, I have been getting to grips with the different graphic displays in CX One Designer but I am having trouble trying to produce a table which shows column one as a label and column 2 as data value that I am polling from a Modbus slave. From what I have read/tried the data block table seems to require a csv as the data source and I cant seem to achieve what I want with the standard table. If anyone can advise how I might be able to achieve this I would be extremely grateful. Below is the sort of thing I'm hoping to achieve but in a table format: Bearing 1 Temperature 80°C Bearing 1 Vibration 0.2 mm/s² Bearing 2 Temperature 82°C Bearing 2 Vibration 0.2 mm/s²
-
Sysmac Studio print quality - print to PDF as searchable text
Transistor posted a topic in NJ Series / Sysmac Studio
I'm printing extracts of my code for change control records. The print quality is terrible as it seems to output low-resolution JPEGs to the PDF or XPS files rather than vectored graphics and TrueType (or other vectored) fonts. See the attached close-up showing the artifacts. Exporting in this fashion also makes the resultant PDF unsearchable. I can't find any configuration options for this. Is there a fix? -
Hello, I would like to download my project to the NS10 -v2 but i get the following error: I kind of remember that it was p;ossible to update this automaticaly in similar cases, like 8.7->>8.8 or something like that, i just clicked on okay and it did it automatically. But after ok the application just stucks on loading, NS restarts, in case of ethernet. I tried it with usb, it just quits after ok, and nothing happens. How can i upgrade the NS10 to 8.8 or 8.7 or 8.9 to be able to download my new project??
-
I have version 1.17 .. and when I tried to import a file from a friend, I got this instead: Is there anything higher than V1.17?
-
I need help i have a got 2000. I developer my software for the hmi with gtworks 3 my problem is: when i update my software in the hmi over the USB cable with my Notebook then i become an error message after reboot. the error message is: communication error refer to sytem Alarm in utillity menu. At the moment i must disconect the hmi from the current and then it works. can everbody help me?
-
Hi. I'm running a Windows 7, 64-bit machine. I have NB Designer 1.4 installed. when I plug in the nb7w-tw00b, it shows up as "MTP USB device", and that the driver install failed. so I opened Device manager and find the item, I right-click "MTP USB device", and "update drivers". I click "Browse for my drivers" and navigate to "C:\programfiles (x86)\omron\nb-designer\driver". I check "Include subfolders". then click next. it does not find the drivers. says "MTP drivers are the best" So I try again: right click the "MTP USB device" but this time I click "browse for drivers", then "Let me pick from my device drivers...". i navigate to C:\programfiles (x86)\omron\nb-designer\driver. I select the bulksub.INF file, and i get this error: "The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with WIndows for x64-based systems" NOTE: I just tried this on a Windows 7 32bit machine. same problem. Except the message says "Make sure it is designed to work with Windows for x32-based systems" Any thoughts to get this to work?
-
I have multiple NA Screens on a control system and they are arbitrarily locking up. The screen becomes distorted and unresponsive. It has happened at least three times on different screens. The only way to resolve the issue is to disconnect then reconnect power. Has anyone seen this issue? Is it a known issue? The controller is an NJ5.
-
I am new in sysmac studio programming. I used WSFT function (word shift) in cx-programmer. What function I will use in Sysmac studio? Thanks.
-
Is there a way to make so after there is no user activity on a HMI for a certain length of time that it will switch back to another page? I have a macro here I am running every second that is watching for page changes. But obviously changing pages isn't the the only user activity there is. 'clear the counter when not one page If($SW0==BCD(65)) $W150=0; EndIf 'Increment Counter If ($SW0<>BCD(65)) $W150=$W150+1; EndIf If ($W150>10) $SW0=BCD(65); EndIf
-
now i start to using omoron products, I need to add a button and once i click or tap the button page2 will come on. How can I make it? is that need to program the cxone? using like MOV to H0???
-
I'm trying to get an older system up and running again. I'm using the software from the original build and a new screen off the shelf. (we had one new in the box never been opened.) The program downloads fine but It never shows up on the screen. I get the same Ethernet setup screen that it originally powered up to new from box . I pulled the program from the same model screen and I can upload it to the old screen just fine. but it will not work with new screen, even though it seems to upload just fine. Software is Quickdesigner 3.70 (yes it older) Screen is a Proface GP2400-TC41-24V (which is the same model number of the old screen) Any help is greatly appreciated. (yes I cycled power)
-
I am just getting started with CX One Designer and I am wondering if anybody can tell me if it is possible to change the font and border colour to indicate state for a multi state input. The system I am monitoring has 7 different states and the customer has asked for a colour coded label to indicate the state of the system. i.e. red = bad, green = good, amber = warning etc. Any help is appreciated.
-
Hey all, i have one question for you, i am working on designing new hmi for one project in cx designer, how can i import more library and use it in my project .
