MrPLC Member
  • Content count

  • Joined

  • Last visited

Community Reputation

1 Neutral

About niklas

  • Rank

Profile Information

  • Country Sweden
  1. FX5U With E-terminal

    Thank you. I will post my results when this is tested and confirmed. /Niklas
  2. FX5U With E-terminal

    I was looking for what drivers that should be used when connecting the new FX5U plc with the older E-1000 series (E1100 in this case) in e-designer 7. Intended connection method is ethernet on the FX5 (obviously) to Ethernet on the E-panel. I am sure this question will come up for several users so let's keep this thread as clean as possible. Has anyone done this Before? Here are the options available: /Niklas
  3. Restart button GT Designer

    I understans that but this is not the case. GXW3 or GXW2 isn't even started when this occurs.
  4. Hi everybody. I'm just getting started with GX Works 3 and I feel a bit lost. If I have an external help file for my function blocks, how do I register this in the program? I can't find it anywhere when I double-click the fb library or in the e-manual Viewer. The file format is .CHM and I have imported this to GXW2 earlier.   /Niklas
  5. Restart button GT Designer

    No, I am not monitoring anything. Neither does it work with an Ethernet Cable directly coupled or via USB.
  6. Restart button GT Designer

    The HMI is fully functional and useable at all times. This is not the issue. The problem is to connect to it via GT Designer 3. I can access Everything in the HMI, including the utility screen.
  7. Restart button GT Designer

    Yes I have, both of the firmwares is up to date. I have also tried formatting and then reinjected the program.  
  8. Restart button GT Designer

    We are currently having issues with a non-responding HMI (GT25) when it has been on for a longer period of time. It responds to ping but every time I try to connect via USB or Ethernet in GT Designer 3 it doesnt reply. The solution is just to reboot the panel. Therefor I want to add a button or similar to just reboot the panel. Is there a known solution for this? I don't know of any and googling it isn't really paying off. Before you say it, Mitsubishi has no ideas what this comes from, even though they analyzed the Project file. Thankful for your support.
  9. Software to read FX1S-30MR-DS

    OK. I have uploaded the MEDOC.exe file for you to download on the link below if someone else is looking for the same issue in the future. Note that this only works with 32-bit architecture on your operating system.
  10. Software to read FX1S-30MR-DS

    Hmm okey, then there is a major chance it is programmed with MEDOC. Do you have medoc? The one I can supply you with requires a 32-bit operating system affortunately. I Think there is some people who made it work on 64bit as well but I haven't had the opportunity to try that. Google it and it will lead you for sure!
  11. MC Function on Q CPU

    I'm not sure what you are trying to acheive here. Could you specify a bit more? What language do you want to use? Printscreens? Most functions has a [Function block name]_E type whitch can be used to limit the function by adding conditions Before the EN-signal.
  12. Software to read FX1S-30MR-DS

    It depends what the PLC is programmed with. If it is programmed with MEDOC, you can easily read out the full program in ladder format. Read using MEDOC or GX Developer (you need an add-in for MEDOC in this case). If it is programmed with a newer version of GX Works or similar, the short answer is no. You cannot read the ladder program from an FX-PLC. You can read what is inside and get the result in Structured Text, but you'll need Mitsubishi software for that anyway.