Search the Community

Showing results for tags 'module sync alarm'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 76 results

  1. Looking for some servo application help. Software: I have GX works 2, GT Designer, and GX Developer.  Hardware: PLC L06CPU-P, GOT2000 HMI, MR-J4-350B servo amps, HG-JR35JK motors, LD77MS2 Pulser I have (2) AC servos that will simply move an aluminum frame backwards and forwards using a FESTO belt mover and I have a servo gear reducer 20:1. I have a "simple motion module"and all of this hardware and software, plenty of time, and would really like to finish this project off. But this is my first servo and my first hmi project. I have some experience with Omron, Mitsubishi, and Allen-Bradley plc's, and consider myself novice at best. Any sample programs or help getting me started would be greatly appreciated!  
  2. Hi, I have encountered an unexpected "PRI" LED indication of 1756-RM Series B module. When the affected redundancy module is set to primary, the status of the "PRI" LED indicator is blinking red. On the other hand, it is set to a solid red when the RM is set as secondary. I have read the manual and there are only two expected behavior for the "PRI" LED indicator, green if it is set as the primary and off if it is secondary. Does someone encountered this scenario already?   P.S. The RM does not have any minor/major faults when accessed. The status indicator indicates "PRIM" when the affected module is set as primary and "SYNC" when set as secondary. Manual switchover between controllers are done and was successful. Thanks in advance! Regards, RIValencia
  3. Please if anyone can help me, recently I installed a redundancy in my Factory View V8.20 server, but started to show some errors: My alarm banner and event simply disappeared and now I can not read tag from my opc server (KeepServer Modbus), I see this tag in the studio, but at runtime they do not communicate. * Patches are up date. Tks! Vitor
  4. I have entered the messages many times into the Alarm Setup but every time i re-open the alarm setup, every message that has the Trigger Value=1 will be deleted.  Anyone have a similar issue?
  5. Hi, I have some concern regarding sending an email automatically when an alarm trigger(High, Low Level Alarms - Bit), Is this possible for the software?  Thanks for any reply.

  6. FX3U-ENET-ADP User's Manual

    pigflying posted a file in Manuals, Tutorials

    Version 1.0.0

    67 downloads

    Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function)
  7. FX3U-ENET-ADP User's Manual View File Using this module to replace of FX3U-ENET to reduce the cost(if not using the e-mail function) Submitter pigflying Submitted 01/19/17 Category Manuals, Tutorials
  8.    Have 10 POE Analog Input Modules available on clearance  10/20-channel Voltage Input, Current Input, & Analog Input Module with High Voltage Protection PoE Module, communicable over Modbus TCP and Modbus UDP    Model Number PET-7017-10     Regular price $459.00/EA    Clearance price $344.25/EA   only good on clearance quantity only.   http://www.icpdas-usa.com/pet_7017_10.html      
  9. Hi! I have my 1756 IF8 wired in high speed differential mode but i can't configure the RTS smaller than 11 ms. What I understand it should be possible to set as low as 5 ms if module filter setting is 1000 Hz. Is there anything else that i have to do?
  10. I wold like to create an alarm history list that can be scrolled through from most resent to 1st. Is this possible with the Panelview 800 7"? We were able to create a page but it holds only 25 alarms and you can't scroll back.
  11. Hi 1- How can I identify a disable x20 module (in physical view) cyclically ? I am looking for a funation block who can do that because I want to use the 'Module Ok' status of x20 module to check if their presence. Problem is 'module Ok' status is the same for module missing or disable. 2- Could I disable a module using fonction block? (FYI I already know the right click in physical view). Thanks  

  12. Alarm in NQ-Designer

    nafise posted a topic in Other Omron Software

    HELLO dear friensds ive been recently working with nq designer and i was trying to define some ALARMs on my program  that if any of specified values changed the alarm appears on the HMI screen but the problem is that i dont know how to create alarms and what are the steps of making one i have seen some contents that said we have to use  S0014 or S004 ...but that is all i see on net  can any one please help me make some alarms  its really urgent and my project has to be done soon !! **The PLC is : CJ2M **The HMI is :NQ5-MQ000-B **** THANK YOU ALL IN ADVANCE ****    

  13. module diagnostic

    Nurlan_B posted a topic in Mitsubishi

    Hi. I have Q12HCPU and Q358 Base unit. How to read from CPU which module removed from base unit when PLC is runing ? Which address storing diagnostic information?

  14. Addressing limit alarm

    Deby posted a topic in GE

    Hai, I have some question. How can i modify the limit alarm  on runtime project via screen.cim? I want to modify limit alarm value on the point ID with other point ID (Type Virtual), but i can not find the field to fill the point ID (virtual). Please give me some solution for this problem.
  15. Hello all, I am new to this forum and it happens to ask a question here. Any advice would be much appreciated! I have created alarm display for PVP 6 600 using FTV Studio ME 8.00 (CPR 9 SR 7). The problem is the alarm time stamp was not fit with the column width. I was unable to find way to adjust the column width of the alarm list object. I am using Courier font, size 10, 4 lines per alarm. The max no of characters in alarm message is 33 characters including spaces.  Aung
  16. Hi, Is there any setup to manage alarms in one PLC from multiple CX-Supervisor runtimes running on different computers? If I get an alarm, it shows up on both runtimes. If I acknowledge from one runtime, I also want it to be gone from the list in the other runtimes.

  17. Rajan

    Rajan posted a topic in CX-Programmer

    Hello Experts  I am facing problem with CJ Series Analog I/O module MAD32. The Run LED is Lit, ERC Led is also Lit. what could be the reason?
  18. Dear Experts!!!   Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block"    As you can see the page no. 3  in the attached document  "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere.   Or if you have any otherone please share it.   Please help!!! KIdoc_QD77servo_English_20130131.pdf

  19. Reading position data from GOT

    quoroy posted a topic in Mitsubishi

      In this first picture is a numerical input with a monitor device D2058. In the whole GOT project this is the only device that saves the information inputed.   Then on que PLC sequence theres an instruction moving that device's value gotten from the GOT to the position module's buffer memory. My doubt comes when there's another device D10022Z9 getting the same value of D2058. In this case the Z9 index is always 0, I checked. In the whole PLC program this is the only part where the D10022Z9 appears, there is no instruction anywhere copying D2058 to D10022Z9 which is how I would think is the way it has the same data always. Am I missing something or how is this possible?  
  20. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  21. Hi Guys,        In my project i am in need of switching language from English to Spanish and vice versa.For all displays,i switched to the needed language according to the working operator.        In alarm history message,If i am in English language mode means,alarm messages also in English and same for Spanish. My issue is alarm messages were not changed to the current language mode.It keep staying in language which were in current mode while it occured. Please find the attachment, NOTE:Example attachment only.  My question is,how can i get the occurred messages in current language? Help me to sort this. Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!    
  22. Hi all, Quick question about adding ENET modules to a plc. If I have a local network of a HMI, PLC and 1 device all on IP 192.168.255.x and I have another device across the plant with an address of 171.27.19.x, can I add that one device to the PLC and it will recognize it? Is there a way to add a device with a totally different IP address to a PLC that is already set up?
  23. https://plus.google.com/105445006108716761629/posts/DzZy3GmFxT8

  24. Programming Error using QJ71C24N

    Husanto posted a topic in Mitsubishi

    Hi All, I have problem about programming serial module Mitsubishi PLC using QJ71C24N. If I unconnect the cable from the module and connect again it show SIO error and the communication become lost or not sending data again. so i have to restart the PLC to make it normal again. Any other solution for solve this error without restart the PLC? Thanks Husanto
  25. hello guys I'm working on a project that requires knowing the first event that put on alarm state to one system and because everything happens in seconds and everything shuts down almost the same time it is very hard to tell the operator what was the cause of the shut down , so I would like to know how to implement a logic to capture within milliseconds the first event that "turns off" the whole plant. Would somebody could help me with this please?