Search the Community
Showing results for tags 'modbus code conver ascii'.
Found 314 results
-
Hi, I have R04CPU (iQ-R series) on one side and on the other side is QJ71MT91 (modbus tcp/ip module). Is it possible to make communication between them (QJ71MT91 is master and R04CPU is slave)? iQ-R series doesn't have Modbus TCP/IP module, but is it possible to set modbus tcp/ip on built-in ethernet port of R04CPU, and how? Best regards Luka
-
Can Mitsubishi FX3GA-60MT PLC be used as Modbus RS485 Slave? Any sample code or documentation would be very helpful. I am planning to communicate to Weintek HMI (Modbus RS485 master) to FX3GA-60MT PLC (Modbus RS485 Slave). Any other ideas would be nice. Thanks
-
Hey, I have a 1763 L16BBB...when I plug the 1762IF20F2 analog card in, I get a 0189h error code. Any help would be appreciated. Currently looking at doing a bootp on the plc to get online...no ip
- 1 reply
-
- 1100 micrologix
- fault
-
(and 2 more)
Tagged with:
-
I am using PLC Modicon M221, I want to make communication between PLC Modicon M221 to OPC Kepware by modbus tcp/ip ethernet. In PLC, I use software somachine basic, I set digital input and digital output. And in OPC Kepware my address 00001, but when I switch turn On/Off in PLC, value in OPC Kepware doesnt change. Could you please correct me? Thank you Bujang
-
Micrologix 1400 ASCII String Compare Not Working!
Rob Nelson posted a topic in Allen Bradley / Rockwell Automation
Hello All, I am in the process of installing a DPM Scanner to one of our machines. I am trying to program an ASCII String Compare to compare the scanned part number, stored in a string as ST14:0, to a constant value stored in ST15:13. I have used this tactic before in other applications and it has worked fine every time, except this time. Am I doing something wrong? Is there a setting I am not aware of? Please see the attached image. Thanks in advance! -
Hi all, I have a micrologix 1400 plc and an SIC E10 engraving machine. the engraver requires its marking info ( day/year/random sequential number etc) to be sent to it via rs232 connection. the manuals have nearly melted my brain and I have no clue how to convert and send this type of info via rs232. please help. thanks NOTPROTOE10V6US-R04.pdf
-
Hello! I am using S7-1200 PLC 1212C AC/DC with configured Modbus TCP Server. I can already read/write Inputs/Outputs (Coils) and Memory Words. However I'd like to read/write Memory BITS. Is it possible? If so, how? What addresses should I use in TIA portal? And which function codes on client side? Thanks in advance!
-
Two FX3U-485ADP-MB One Modbus Master and Other as General Purpose Serial Port
ritz2610 posted a topic in Mitsubishi
Is it possible to use FX3U-485ADP-MB as a serial port to send and receive user defined string/data to and from a computer? I have a FX3U-32M PLC and two FX3U-485ADP-MB adapters. I have been using PLC with one adapter as Modbus Master. Now i want to use both adapters, where one will be Modbus Master as usual and the other I want to use to send and receive data to and from computer terminal (Example - Realterm). I have a third party 232/485 converter which works really well. Lets me just describe my requirement straight forward. I want to display process parameters on a windows computer based user interface (UI) and also set some variables in PLC from the same UI. The UI has access to serial ports of computer.- 3 replies
-
- fx3u-485adp-mb
- fx3u
-
(and 6 more)
Tagged with:
-
hello everyone,, I use the QD03UDV PLC and the modbus QJ71MT91 module, I want to test the module using modbus poll but it fails continuously, and when I upload the program to the LED notification PLC "COM.ERR." the module is ON ... but in GX Works2 I have no errors .. why is it like that, can someone help me?
-
Example of ASCII program on a Micrologix 1200
Roboman posted a topic in Allen Bradley / Rockwell Automation
Does anyone have an example piece of ladder logic, created on a Micrologix 1200, using ASCII to READ and Write to a serial device? I am building a ladder on a Micrologix 1200 that will send data to an old CNC once a certain ASCII instruction is received on the PLC. For example, when the machine spits out an ASCII "1", the PLC will see the "1" and send out a three digit number depending on a sequence of discrete inputs. Thank you,-
- ascii
- micrologix 1200
-
(and 2 more)
Tagged with:
-
Hello, I want to do communication between CJ2M-CPU35 and LS drives. I am new to Omron.I searched the manuals regarding protocol macro.but it's bit confusing for me.please send if anybody have the sample program and document so that I can do it.Please support. Also I need to communicate Citect SCADA with CJ2M-CPU35 on Ethernet, please send me the documents if you have. Thanks
-
Hello everyone, I'm currently trying to communicate via ethernet with a Parker drive IPA15-HC. I'm using a 5069-L306ER CompactLogix 5380, revision 30.011. There are add-on instructions that allow you to control the drive, but since they're really basic I'm trying to use message instructions to get more data out of it. The knowledge base provides a zip named IPA_AOI_Rev4, that includes the add-on instructions and the program you should download to the drive to use them, this is the current file downloaded in the drive. Now, I've tried different msg configurations: CIP Data table read, CIP Data table write, CIP Generic copying the values in the examples and I always get the same: Error Code: 16#0001 Extended Error Code: 16#0000_0125 That extended error code is nowhere to be found, not in the Logix designer online help and not in rockwell's knowledge base. Any idea?
-
Is there any function for Mitsubishi PLC to perform as a Modbus Slave?
-
hello. I've been trying to communicate this omron plc CP1L-EM30DT1-D, with a yaskawa inverter cimr-vu4a0004faa. but i can't figure out how to make de correct mov or configuration in de DM. i need to run/stop, change frequency. some help, please. :) 485PRUEBA.cxp 485PRUEBA.opt
-
Hello, I have a fuel level reading system in a 2000 gallon diesel tank. the system has a slc 5 05 of rockwell. I need to connect the system to a printer located in an office 300 meters away from the tank. can someone give me lights about the type of printer I need and what communication technology to use, preferably wireless. Thanks.
- 4 replies
-
- automatic printing report
- slc 505 printing
- (and 2 more)
-
Hello. I have a communication problem between an L30ER and SM2 module. It gives me a message error 16#001e, extended err code: 16#0000_0002, Error Text :Embedded service resulted in error. I have a Lovato network analyzer connected to SM2 module via Modbus RTU, on channel 1. The setting in the MSG instruction are: Configuration:Service type - Custom, Message type - CIP generic, service code 4b, Class 33f, instance 0, attribute 0, Source CH1_REQ[0] - INT[10], CH1_RESP[0] - INT[10]; Communication: slot 4, port 2, channel 1, Connected - not checked. baud rate is 9600, DSI/RTU is 5, format 8-N-1. the channel led from the SM2 module is flashing. I read the value at a 2s. The rung is: XIO.TON.EN+TON.2s.EN+MSG.EN. The Cable betweenSM2 and Net.Anal is a CAT5, pins 4(A) and 5(B) Maybe someone has a clue.
-
Modbus addressing in Weintek HMI to poll data from Temperature sensor through RS485. In my system i have connected Temperature sensor to I/O Scanner has output in terms of RS-485 which directly connected to COM3 Port pin. No. 6 (as Negative) & 9 (as Positive) of HMI (Model No: MT8071iE) and HMI connected to PC via ETHERNET. I want to read temp on HMI screen via MODBUS protocol. So, can you please provide me instruction about addressing of MODBUS register in Easy-Builder Software so can read data of corresponding register. Because when i do compile i got an error like " Device no Response". I hope i will get reply from your side as Fast as possible to overcome this problem. Thank you.
-
ML1400: Manipulate output through modbus/tcp
MikosMotta posted a topic in Allen Bradley / Rockwell Automation
Hello I have a scenario that's been bugging me for some time now. The scenario consists of a Micrologix 1400 that I need to control it's output from modbus/tcp. In detail what I really need is to be able to manipulate the O0:0 through modbus/tcp. The PLC would be the master and I would be the slave that triggers the connection to the master. I'm using a Modbus-Client on my PC and that should be the slave. Any idea as to how I can manage that? Currently I can send data to the master but everything is "stored" on B10 and I have no idea how I could write directly on O0. Thanks a bunch guys. PS: I'm borderline noob. -
communication between HMI GS series mitsubishi to inverter hitachi SJ700 series
diraemon posted a topic in Mitsubishi
hy everyone.. I want to communication inverter SJ700 to hmi mitsubishi GS2017 for read an code error in interface HMI? is it possible to communication between them?- 4 replies
-
- communication
- hmi
- (and 8 more)
-
Hi All, I am pretty new at electrical design for PLC control panels. We are a UL508A shop, so this is the code I refer to most. Something struck me as odd when I was trying to size wire for this control panel. UL508A 28.3.1 says this: The required size of the field wiring terminal shall not be less than 14 AWG (2.1 mm2) and shall be determined by: a) Calculating the required ampacity per 28.3.2 – 28.3.6; and b) Determining the minimum field wiring conductor size from Table 28.1 having a corresponding ampacity that is equal to or greater than the required ampacity from (a). How can the minimum wire size be #14 AWG? We use #16 AWG for wire to the PLC modules? Are we breaking code or is there something I am missing? Also, understanding code books can be difficult. Is there a website or place I can go to get a plain English translation? I feel like I will read a sentence over and over again to try to understand what they are saying, and feel like there's is a much easier way to say it than the way it is written. For example, "28.3.1 b" ……...what is it really saying?
-
ModBus RTU communication between Omron CP1E (CP1W-CIF11) and an Arduino using MAX485 RS485 transceiver
José Silva posted a topic in CX-Programmer
Hello everyone! Briefly introduction, I would like to communicate and test the following hardwares: 1- Omron CP1E (using an Option Port CP1W-CIF11) ; and 2- Arduino Nano using MAX485 RS485 transceiver. The CP1E will operate in "Modbus-RTU simple master" as illustrated in image 01. The arduino will be in slave mode address 1 and the library used is "SimpleModbus NG" ( https://github.com/angeloc/simplemodbusng/tree/master/SimpleModbusSlave ). Taking the sample in official manual ( https://industrial.omron.eu/en/services-support/technical-tools/downloads#cp1e ) , pages 248-253 in the "CP1E CPU Unit Software User's Manual" (Image 04) describes a sample communication to an "Inverter Slave". I want to use the Arduino Slave as the Inverter Slave just to be sure that all previous steps are correct. Therefore, I would like to know: 1- As illustrated in Image 02, Am I missing any resistors? 2- Should I connect the GND to the FG? 3- In this scenario, the DIP switch setup should be as illustrated in image 03? Only DIP4 is OFF. 4- Can I test it just forcing A641.00 and checking the DM Area Data, as shown in Image 05? The code used in it is the following: // Wiring: Arduino and MAX485 // RX0 - RO // TX1 - DI // D2 - DE/RE #include "SimpleModbusSlave.h" enum { REGISTER_0, REGISTER_1, REGISTER_2, REGISTER_3, REGISTER_4, REGISTER_5, REGISTER_6, REGISTER_7, REGISTER_8, TOTAL_REGS_SIZE }; unsigned int holdingRegs[TOTAL_REGS_SIZE] = { 0, 1, 2, 3, 4, 5, 6, 7, 8 }; void setup() { modbus_configure(&Serial, 9600, SERIAL_8N1, 1, 2, TOTAL_REGS_SIZE, holdingRegs); } void loop() { modbus_update(); } Any answer can be helpful. Thank you for your time! Regards, Jose. -
I using easymodbus library to connect and read data from 3 PLCs CP1L but it run unstablely, sometime it disconnect and i cant re-connect PLC, it give error time out when i try to reconnect when it happen, i restart PLC and everything back to work. Someone please help me. I am new with modbus and omron
-
Hi, I want to sent simply frame using FB mady by JPV from Omron France. It should send just frame 01030FA60002273C to slave #1 When I check Multiway - it seems that frame is OK, but slave no reply. I checked different soft to monitor serial port and frame looks different - some bytes are sent twice. I attached screenshot and you can see the difference - Can you explain why it happened. Both frame I got when I set W30.0 in PLC and I saw just one blink LED Hmm I also attached screenshot from my serail port configuration. I tried also diiferent set of CP1W-CIF11 dip switches, but the same effect. Any clue??? thanks in advance
- 3 replies
-
- cj2m
- cp1w-cif11
-
(and 1 more)
Tagged with:
-
Hi Guys just a quick one before I begin thinking about a new project using MODBUS RTU i want to have a MODBUS network over RS485 consisting of a HMI (Master) FX3G (Slave1) and a remote IO unit (Slave2) obviously i I know the master can request information and send commands to slaves, but can Slave1 send outputs/commands to Slave2? Or can only the master communicates to each slave?
-
Can I write modbus rtu over RS-232 interface of the CPU module Q01UCPU
JohnStudio posted a topic in Mitsubishi
Hi, First as i know we can communication in MODBUS RTU as summary below 1.FX series, FX3U-485ADP-MB + ADPRW instruction 2.Q series, QJ71C24 <Serial interface module>+ Pre-defined protocol 3.Q series, QJ71MB91<Modbus interface module Three thing upper, i think it will ok The question is 1> FX series, Cloud we use < Serial communication only not Modbus adapter> + RS instruction to do Modbus and How to do that. 2>Can I write modbus rtu over RS-232 interface of the CPU module Q01UCPU and how- 2 replies
-
- modbus
- mitsubishi
-
(and 1 more)
Tagged with: