Search the Community

Showing results for tags 'inverted input'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 34 results

  1. Current Monitoring

    Greetings, I've been having some issues with a vacuum pump breaker tripping... I think I've figured out the problem and resolved it but I noticed that several of the other motors have current monitoring on the HMI but the person who set this up is no longer with us.  I'm wondering what I need besides an analog input for my control logix processor (which I have) to setup this project.  I'm not sure if the other motors are just monitoring one leg of the 3 phases or if they are somehow showing total current?  any ideas and recommendations would be greatly appreciated.   thanks,
  2. How to take single bit form input WORD by Structured Text? Can i write somethink like: inVar[i]  
  3. Hello! I am programming with FT view studio version 8. In the program, when I make numeric display, I can not input values for this tag I am using in the display. Then I decided to make 'invisible button' for enabling the input for this tag which is shown in the numeric display. This is okey for me, only if there is other ways to do this please tell me. Now when I have created this numeric display with input enabling -'group', I have a problem, how can I use security levels for this group, so that only logging in values can be set? I have found that there is security code selection for this in the screen displays, but not for the buttons.
  4. Rotary input device

    I am looking for some sort of rotary input device which could be used for fine adjustment. Ideally it would have to two output pins, if turned clockwise it would send pulses on one of the pins and when turned counterclockwise it would sent pulses on the other pin. These could be connected to two inputs on PLC and a value in a given variable could be incremented and decremented depending on the direction of rotation. Almost like using potentiometer with analog signal. I guess if I can not find anything I could use incremental encoder and look at the phase of the output to decide which way it is being turned but hopefully simpler and maybe more cost effective solution is out there? Thanks.
  5. Hello everybody, I am connecting my DCS digital output (115VAC) to AB PowerFlex 753 Digital Input. We are using the 20-750-2262D-2R I/O option in the powerflex which is 115VAC I/O with 2 Analog In, 2 Analog Out, 6 Digital In and 2 Relay Outputs. My question is, what is the current or power consumption of the PowerFlex DIs at 115VAC. I need to specify the right fuse size for my digital output. Thanks,
  6. I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!
  7. For "string display and input" objects, there a "full keyboard" option that, when selected, will cause a keyboard screen to pop-up when you press on the input object. Is it possible to change this keyboard to one with Russian characters on it?
  8. I am working on Remote IO panel and plan to use the following components: 1734-AENT 1734-OW4 - qty 2 1734-IE4C I wonder if I need to separate the bus between the relay output module and analog input module? Or anywhere else in this setup? Thanks.
  9. Using GX Works 2

    Hi all, Just joined today and was browsing through this forum. Now I need advice/help. I have installed the software to read an FX PLC. It worked okay yesterday. I was going through a program printout that I downloaded and couldn't see where the X inputs were in the program. So, I thought i'd go back in and get the program again. I connect to the FX fine. It passes the test and then I connect. The screen comes up entitled "Online Data Operation". I select "All" and hit the execute button. Wait about five seconds and then I get an error: "The Device Data Name is Empty". Okay. I go to put a name on the "Title" box and it WILL NOT TAKE KEYSTROKES. Gaack! :helpme: I have restarted the program and laptop several times. No matter what i do it will take keystrokes in the "Title" bar. I cannot get the program. Any thought? The only thing I can think of is to reload the program but that takes quite a while. Old stuff is fun to work on.