Search the Community
Showing results for tags 'gx works program step count'.
Found 139 results
-
Hi Im working with an iQ-R CPU wich controls 6 conveyors with a CC-Link IE Field Network, the CC-Link module is a RJ71EN71. Each conveyor has a remote I/O (NZ2GF2B1-16TE Digital outputs main module with a NZ2EX2B1-16D extension for Digital Inputs). The communication in the CC - Link IE Field diagnostic appears to be OK, but I can´t send or receive IO signals from the Batch Monitor of Gx Works 3. Thanks for your attention!
-
Hi everybody. I'm just getting started with GX Works 3 and I feel a bit lost. If I have an external help file for my function blocks, how do I register this in the program? I can't find it anywhere when I double-click the fb library or in the e-manual Viewer. The file format is .CHM and I have imported this to GXW2 earlier. /Niklas
-
hi. i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi. can you bring me some example? i am sorry, my english is Bad
-
I am unable to read FBD program in RSlogix 5000.It says editor not downloaded.I m able to see ladder logic programs.
-
Hello I am at a loss here. There is something happening with TON_2 that also affects the variable STEG. Even though the input to TON_2 is false, IN and Q are true. Suddenly IN and Q turn false, and at the same time variable STEG makes a jump from 3 to 4, even though criteria for this step is not confirmed. Have had to override this fault by introducing a SR-latch and outside of block make a comparison between NIVÅ_FÖRRÅDS_KÄRL and 150.0 By the way, TON_2 is not declared globally. Would be very happy for suggestions and pointers. Cheers // DAN PE2 Jump.avi PE1 Jump.avi
-
I am using GX Works2 and I cannot use the format "Label.1" to access the first bit in the word represented by label. Is this a function that just does not work or is it abnormal. Is there a way to do this easily. I am using structured ladder. Also is there a way to use the K*, notation with an array of bools represented by a label. I saw elsewhere the syntax K8<Label>, but that will not compile for me.
-
Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.
-
Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool
-
Hello everyone. I can't find my ST program step count in GX WORKS 2. Does anybody knows where is program step count in GX WORKS2 ?
-
I used to use the Old Dos based MEDOC very many, many, years. I havn,t programmed for years now. We have GX Works 2 at work, and I am practicing programming an FX 3G - 40M to try and keep my hand in. Allthough I can write and read the program ok, the PLC keeps saying that it has no memory for the comments. Apparently the memory has to be set on the PLC. Any advice or information links will be appreciated
-
-
I need help with a program I wrote for school that didn't work quite right. I have to make a chasing light program that will freeze the lights when a PB is engaged and reverse when PB is engaged on light 1. The assignment has already been turned in but our instructor ( if you want to call him that) has told us a similar sequence will be on the final. Can anyone help me out??
-
QD75MS Module MR-J3-B program with functional block sample
sachincool786 posted a topic in Mitsubishi
Dear Experts!!! Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block" As you can see the page no. 3 in the attached document "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere. Or if you have any otherone please share it. Please help!!! KIdoc_QD77servo_English_20130131.pdf -
I'm working on a project that is made easiest by using a sequencer. The process I have has 51 outputs. I've created the array as the steps that I need but how can each step have more than the standard 32 bits (DINT)? Is it possible to change the length of the DINT so every output is available at everything step? Thanks. Sorry if my description is vague I'm still learning some of the terminology.
-
Hi, Is there anyone who know if there its a way to toggle in TIA V13 sequence step block? I would like to have a light toggle as long is in a step in the sequence? Anyway to do that?
-
Dear Sir, I need to update the PLC program offline with online, so I tried to compare the program blocks but I got the error that The comparison of the two blocks in STL showed that codes are identical. But still when I want to go online it is giving error that codes are different. Can anybody help us in this? New Microsoft Excel Worksheet (2).xlsx
-
hello...... i use of C200HS-CN220-EU Program Download Cable for downloading program to plc. i can work online but when transfer to plc error is check dip switch.... i read manual and dip switch table but cant set dip switch..... please help me to setting dip-switchs for C200HS-CN220-EU Program Download Cable...
-
How to resolve my plc is stop working after download program from H1U-XP with autoshop v2. It show download plc program process but i don't have any program in ladder chart. Pls help...
-
Halo, i have question and asking for help. my factory use mitsubishi plc type fx5u. can anyone help me how to setting everything that make motor servo can run. PLC : FX5U Ampli Servo : MR-J4-70A Thank you for helping me.
-
Hello, I have a question concerning the verified program. I do not know if the program is verified or not. I can not upload pic. I have 8 programs Verify result MATCH and one green line Data (Verify destination):NOT TO USE Verify result: Dest. Only. The green line is confusing me. I ask for an explanation. Please. Greetings to all
-
I have a problem when trying to download a program from a FX1S-30MT PLC. I am using a SC-09 USB cable. The software i am using is GX Developer 8. When trying to download the MAIN program the screen in the attachment appears. I tested the download from another PLC of same model and have no problems, therefore the cable is ok, and the laptop is ok. When downloading of the parameters and comments does not give error, just when trying to download MAIN. Also I tested connection with Test Connection button and says communication is ok. Anyone who can help? I have a doubt, how can i see the communication parameters on the PLC side? Thanks a lot
-
Hello All! Long time engineer first time programmer. Any help is greatly appreciated. I have an automated Beer bottle rinser, filler, and capper that I need help diagnosing a problem. We purchased the machine in July and it ran great until a couple weeks ago when it doesn't seen to be reacting to bottles being present anymore. FX1s-30MR Here are the symptoms: When a bottle is run around the filling carousel, there is a prox sensor to detect it's presence (X007). There is also a sensor under the machine on the gears to detect timing (X006) When a bottle is detecting there is a slight delay, then the pneumatic valve for the purge fires (Y001), followed by the valve to fill the bottle with beer (Y002). Even though, the LED light on both the sensor and the I/O illuminate confirming that it is receiving the the input signal from that sensor, no output signals are being sent. My first instinct was to check all electrical connections and swap out the prox sensor just to be safe, but still no dice.... So I purchased a USB-RS422 FX cable and downloaded the demo of GX Works 2 to better try to pin point the issue. Using the monitor function on GX works 2 I can again confirm that the PLC is receiving the correct signal from X007 when a bottle is present, however the outputs Y001 and Y002 have a constant value of 0... Unfortunately this program is not simple enough for me to really understand, so maybe someone can make more sense of it than me. (see attached). Also, Not sure if its related, but when I ran the check program there is a double coil error revolving around the Beer inlet solenoid. This is to let beer into the filler bowl, not the bottle. oh and the manufacturer won't be able to help for a couple weeks when they can send a technician... Any thoughts, comments, or questions are appreciated. Cheers, Eric screenshot2.bmp screenshot1.bmp
-
Software: GX Works3 I'm really struggling to understand GX Works online / offline operation. (I know they've been consistent in how this works for the past ten years - but it's consistently bad!) I can't find how to work in offline mode. I powered off the PLC and the software keeps trying to connect. I've cleared the PLC memory and am trying to download the complete program to an FX5U. (I was able to do it earlier. I'm still able to communicate with PLC over Ethernet.) I'm getting:Unable to write target file because it is the following status. (sic) - Unconverted - Converted function block does not exist in FB file. - Converted function block does not exist in FUN file. - Unconverted module label. There are no red items in the navigation tree. There are no errors after a Rebuild All command. What do I need to do to figure out what the problem is? Many thanks.
-
Hello, First of all, Hello to all members. Im From Portugal. I trying to help my dad. I Have a Omron CJ1M-CPU11 with a program running that works fine... Now i need to transfer this program to a CJ1M-CPU13. I started to download from CJ1M-CPU11 to a file... them im running the Cx-programer on the CJ1M-CPU13, connection its ok, but when i try to transfer i get this error : The connect PLC type : CJ1M-CPU11 The Project PLC type : CJ1M-CPU13 Its possible to convert ? Please Help. Please view in attached file. Thanks
-
Hello: I'm not sure how to go about creating the structure of this program, would like some ideas/help. I have a program that checks/reads 8 analog inputs and compares each input against 4 different settings, if the value is outside any of these settings the program runs a subroutine to send out an email for (Alarm/Event) notification for that particular input. The way the program is structured now is that it reads analog input 0 first and checks against the settings if the reading is not in range it will call a subroutine to send out email for that sensor(analog AI:0.0) then it will return and read for Analog input #1 and check reading and if it needs to it will call another subroutine to send out email for that sensor(analog AI:0.1) and so forth. What I need to add, is a way to count how many times a sensor(input) has sent the alarm email because I want to limit this to 5 notifications after that, stop sending emails. Now this has to be done for each sensor(input).(Note: I would also like to have a timer involved so that it will only send emails about every 15 minutes for 5 counts.) I need this because the plc will send out emails until the error for the sensor has been corrected, this could take a few hours and if I don't have some sort of control, that would result in 1000's of emails being sent and world probably get shut down for spamming. Would like some ideas on how I should go about this. I am using a micrologix 1100 and rslogix 500 software. Thanks
