Search the Community

Hello. Is there some kind of FUNCTION BLOCK to PING IP Device? Thanks. BR, Andrej. 

I currently have two NX1P2 PLCs communicating back and forth over ethernet IP. However, I am looking to expand this project across multiple PLCs and I need a way for one PLC to see all other PLCs that are connected to the LAN network via Ethernet IP. I can use the _EIP_EstbTargetSta[255] function which is a boolean value that returns true if there is an established connection  to a device where the last octet of the IP is specified in the array [255].  This function works well but my PLCs are configured with the subnet 255.255.0.0. And I need to see the connection status based on the third octet. Is there an existing function that I can use, or is there a way to view the full structured text for the _EIP_EstbTargetSta[255] function and modify it to suite my specific application? 

We are using GX IEC developer software and Q25PRHCPU using Melsecnet communication. Remote device 18 nodes QJ72LP25-25 remote LED solid red, all remote IO feedback loss. Already i had replace QJ72LP25-25 module and Fiber optic cable, but still same issue happen. Kindly advise me how to resolve this issue. Thanks!

Hello Everyone, I have a Omron CJ2M PLC, and I have configured the Ethernet/IP port of this PLC to communicate over ethernet connection. I want to read/write the DM, HR memory areas of Omron PLC (CJ2M) using eip protocol communication. Is there any protocol specification which explains the telegram structure to be sent over ethernet to be able to read/write the values in omron plc over EIP? I want to know the command structure which can be sent to PLC and PLC will respond with the proper response. 

I see on the forum there are a couple of mentions of netbiter and they seem positive, ive just got one and do not understand how the messaging works. I have tried creating a template just to read D0, i believe i have setup all my IP settings correctly but i am not certain, they are on the same address range for sure. If anyone has used this before and could point me in the right direction that would be great  

Hi everyone! I am attempting to read EIP tags from an Allen-Bradley ControlLogix from an Omron NX1P2 using the Sysmac Studio function block "CIPUCMMRead." I have been successful in reading arrays and single variables no problem. However, when I want to read arrays from a structure in the Allen-Bradley PLC, I always get an error code in the CIPUCMMRead ErrorID of either 0400 or 1C00 for ErrorID and ErrorIDEx is FF00 2105 depending on what I enter in for Size on the function block (attaching screenshots with both error codes).   The errors show on multiple "read" function blocks at once but it only affects data coming out of the function block where I try to read in a BOOL array from a structure in the ControlLogix PLC. If I enter a UINT#1 for the Size, I get ErrorID 0400. If I enter UINT#2, 3, or 4, I get ErrorID 1C00 with ErrorIDEx being FF00 2105. I've been digging for a while and can't find that specific combo of codes, but it looks like it's a size issue. From what I can tell, the Size is in Bytes. So if I have 32 Bools it should be a Size of UINT#4 max, right? Any help would be greatly appreciated! The function block having issues is setup the exact same as the other two that read from the same structure; I even copied and pasted them from each other and just changed the FB name and the postfix in the SrcDat string (from MyBools to MyDints/MyReals). Here are the screenshot: 1. Allen-Bradley Structure 2. CIPUCMMRead Function Block with size 4 3. CIPUCMMRead Function Block with size 1

Data is loaded on PLC omronCP1E and HMI NB7W-TW00B no commission to PLC serial cabel are new

Hey I'm trying to implement reconnecting for FINS/TCP protocol, according to W421 Omron documentation (link: https://assets.omron.eu/downloads/manual/en/v4/w421_cj1w-etn21_cs1w-etn21_ethernet_units_-_construction_of_applications_operation_manual_en.pdf ), but it not working. According to diagram in 7-4 section at 183 page, after connection lost and restore connection to the Internet, Client(PC) should again connect with PLC using the same Client(PC) FINS Node Id. PLC should detect connection error and response with error code 00000021 hexadecimal: Specified node is already connected. It works. After this should I close socket (created after restore connection) or this socket should be closed automatically by PLC? Then I should create new socket (third) and connect with the same Client(PC) FINS Node Id should be possible. But i've got "Specified node is already connected" error again. PLC dosn't forget before connection. Why? What I'am doing wrong?   // Client FINS Node id = 50, Server FINS Node id = 10. Standard communication works public void TestReconnect() { // connect on TCP Layer this.tcpClient.Connect(base.ipEndpoint); // NADS Frame - finsClientNode = 0 - autoallocation this.SendNodeAddressDataSend(); // Power interruption!!! // creating new socket, old socket is unavailable this.tcpClient = new TcpClient(); // connect on TCP Layer this.tcpClient.Connect(base.ipEndpoint); // NADS Frame - use finsClientNode autoallocated before // should return error "The specified node is already connected." this.SendNodeAddressDataSend(); // disconnect on TCP Layer, should i do this? this.tcpClient.Close(); // creating new socket, old socket was closed this.tcpClient = new TcpClient(); // connect on TCP Layer this.tcpClient.Connect(base.ipEndpoint); // NADS Frame - use finsClientNode autoallocated before // shouldn't return error "The specified node is already connected." // because connection with this node was closed before this.SendNodeAddressDataSend(); } private NodeAddressDataSendResponse SendNodeAddressDataSend() { /* byte clientNodeId = finsRequestDataProvider.GetClientNodeId(); byte[] header = new byte[] { F, I, N, S, // 'F' 'I' 'N' 'S' 0x00, 0x00, 0x00, 0x0C, // 12 Bytes expected 0x00, 0x00, 0x00, 0x00, // NADS Command (0 Client to server, 1 server to client) 0x00, 0x00, 0x00, 0x00, // Error code (Not used) 0x00, 0x00, 0x00, clientNodeId // Client node address, 0 = auto assigned };*/ var nodeAddressDataSendRequest = this.finsRequestFactory.CreateNodeAddressDataSendRequest(); var nodeAddressDataSendResponse = this.Execute(nodeAddressDataSendRequest); this.finsRequestDataProvider.StoreAutoallocatedNodeId(nodeAddressDataSendResponse.ClientNodeId, nodeAddressDataSendResponse.ServerNodeId); return nodeAddressDataSendResponse; }   Thanks for any help          

Hi, Does anyone know how to do an online edition using FINS commands? Thank you!

Hi, How can I communicate Codesys and Intouch. Can you help me.

Hi. what i've gathered, i need an EDS-file for the siemens s7-1200-system to be able to specify an ethernet connection in sysmac from the omron plc side to connect to the siemens ethernet/ip server. Anyone know where or how to get an EDS file for the siemens plc so i can import it into EIPprofiles in sysmac?

I have an application where I'm using GOT2000 to read data from the weighing unit using RS232 and I send this value to Omron CJ2M through Ethernet/IP. Some variables from that PLC are connected to the elements of the HMI. The problem is when writing the weight value to the PLC through script or Data Transfer is disabled, the RS232 reading works fine, it's fast, etc. However, when I enable the script which writes data to the PLC, the RS232 slows down by a lot, like it refreshes every 2-3 seconds. If i set the script to execute like every 1-2 seconds, it is working better (still slower compared to when the script is disabled) but I cannot leave it like this, because the weight is used to control some valves, pumps, etc. Enabling script doesn't slow down normal communication with PLC, because I tried to test it by displaying the value of seconds from PLC on the HMI and it refreshes every second. Does anyone have idea why such tiny script causes so many problems with RS232?

I'm trying to exchange some data between two controllers. I've used a manual which describes Tag Datalink communication. Everything works fine on the Bradley side, which means I can read values from Omron without problems. However, on the CJ it isn't working. In the Network Configurator I get error every 10 sec (Tag data ling error, code 03D5) and cannot read any data from AB. When I open Connection Structure Tree I see that the input tagset from AB has 'Broken path (0000000000000)' and Unknown Device right next to IP address. I've tried using EDS from the Rockwell as well as uploading it from AB PLC directly - I don't know if it might be EDS issue. The only thing I noticed that inside CJ2M-EIP21 EDS it says that Ethernet/IP is Class 1 connection, however in the 1769-L35E EDS Ethernet/IP is Class 2 connection. Have anyone ever had such a problem?

Hi all,  I am trying to modify the date and time of several PLCs from other PLC. Them are all CJ2M, and they are all in the same ethernet network (192.168.100.xx) and in the same FINS network (#1). I am doing it using the FINS command 07 02 ("CLOCK WRITE") with the CMND2 instruction. It is not working entirely: the clock time is being modified at the specified node; however, I do not get the FINS response (expected 07 02 00 00). If I modify the number of retries of the CMND2, the command is repeated all the specified retries though the clock was already written on the first try.  The D+0 and D+1 (response channels) are always #0; nevertheless, the I+1 ("Communication Completion Code" channel) allways receives #205. Acording to the manuals, this code is for "Response Timeout". I have tested it with 10 retries and with 10.0 seconds of monitoring response time, but it is working in the same way: the clock is modified fast enough, but I am not getting the FINS Response and the I+0.00 bit is ON after 100 seconds...  I have been also doing tests with the OMRON's Etherway Software, sending the same FINS command, and here I am getting the response properly. (???) I would say the FINS network was set-up correctly. All the PLC were set in network #1 with Cx-Integrator. In fact, they are currently sharing several channels using the SEND command on this network #1. I don't know what I am not doing right... Any idea?  The ladder is attached as .cxp and as .png. Thanks a lot.  Best regards.  CLOCK_WRITE.cxp

Has anyone have any experience getting a Wieland Safety plc (SP-COP1-ENI) communicate with an Omron Plc (NX102) via Ethernet/IP? EDS file installed, connection is set as per the documentation yet  I cannot get it connected.  

Hello I have a problem whit PLC mitsubishi FX3U thernet communication, we have a module  FX3u-ENET-ADP. and we have the error "**03 Special Parameter Error".  

Has anyone connected a NB HMI to a CP1L-EM via ETHERNET NB = Node 2 IP 192.168.1.152 PLC = Node 1 IP 192.168.151 Using my Network Switch/HUB NB works fine when setup to com 1 on the PLC (Wrote the PRG using serial) NB says no response from PLC Is there a secret setting in the PLC i need ? ? Rob  

Hello fellow tinkerers, Inside our company we're expanding our IoT network with the replacement of CJ1G-H to CJ2M CPU units. When swapping models we are downloading the Datamemories back into the CPU. Our engineer warned us to not download all the DM memories: only up to D20000, so I did. When starting we had some inputs that weren't showing in the Data trace: and noticed that it were pulses shorter than 8ms. We found out the "Unit settings" were back to default and this is not unusual since we only downloaded range D0-D20000 but I'd like to avoid this in the future and look up what each datamemory means. I know D30000 to D31599 are the memories for the CPU bus unit settings (manual W473 section 4-5) but what range is the "unit settings" within these 1600 datamemories? I can't seem to find it in any manual I look into (W473, W472).. Also do you see any problems with downloading the full datamemory range?   Kind regards!

Dear All,   Am new to Siemens plc. i have CPU 315-2DP. but when i try to communicate with pc through simatic Manager . i receive the Following Error. " Unable to establish a connection with module ." Sometimes it gives error as attachments. kindly help me out.    Through control panel , i have selected the PG / PC interface to S7 Online with PC adapter Auto 1.   Kindly help me out. you will be a life savoir.   Regards, ZUbair

Hello All, I would like to control Powerflex 525 drive with Omron NJ301-1200 PLC via Ethernet/IP (Set speed, start, stop). I've gotten until the part where I downloaded the necessary .eds files of the drive and imported into my Sysmac studio. However, I'm stuck after this point while assigning target variables and Originator variables and eventually setting speed and controlling the vfd. I've attached images for your reference.

I am trying to POST API to a meter in Maximo using a socket in a 5069-L320 controller. I am able to successfully create and open the socket. The write and read instructions get the DN bit but I do not see the meter updating in Maximo. I was able POST successfully using Postman, so I know I am sending the correct information. Do I need to be formatting the POST differently? I'm not getting errors so don't have a direction to go from here. (I will fix the obvious username and password vulnerability, one step at a time) Thanks

Hi, I'm trying  to use send and receive function. I have to send 2 words from cpu CJ2M CPU33  to CJ1M CPU13. I use enthernet network.  I saw a strange thing  that if I just use send function  then my data goes to second  plc without  having  a receive function.  Its that right? I didn't  mentioned  wich port because  I'm not sure wich  is. I left for automatic allocation. 

Hi:       Has anyone use Fins Command with NX1P2 (or any NX/NJ). I try with Multiway with "[!]: Command format error (1004)" Below is the command from multiway 800003000100000100060101820001000003 Data memory are define in global variable table as  A as %D1, B as %D2 and C as %D3. The relevant setting are done on Fins Setting and Memory Setting in the PLC.   Anyone ?    

Hi:       Has anyone use Fins Command with NX1P2 (or any NX/NJ). I try with Multiway with "[!]: Command format error (1004)" Below is the command from multiway 800003000100000100060101820001000003 Data memory are define in global variable table as  A as %D1, B as %D2 and C as %D3. The relevant setting are done on Fins Setting and Memory Setting in the PLC.   Anyone ?    

I'm trying to understand the basics of using a serial to ethernet converter such as this Comtrol DM-EIP-2101, with Studio5000 code. Basically I have a weighing machine that only outputs data via RS-232 and I need to send that data to a PC that will process it through a Studio5000 program and have the data displayed on an HMI using FTview SE. Is it as simple as just connecting the serial and ethernet to the converter and it does all the work? Obviously checking ip addresses and firmware will need to be verified. The main thing I am unsure of is the process of passing the individual data packets from the machine to the Logix code on the PC,  things like what the weight of the item was, was it over weight or under, etc....  Would there be an AOI or tags built into the software for a machine like this Checkweigher? I've worked with much smaller items like Cognex Dataman cameras and I know you can just use their AOI that allows you to simply call a tag if you want to display information like if a scanned barcode was correct or whatever. If anyone has done something similar I'd appreciate any guidance. It can be difficult getting the information from the manufactures so I'm looking for answers anywhere I can. EDIT: I guess I should also clarify that only using one or the other (serial or E/IP) is not an option. It will be a serial connection from the Weighing machine to the converter and then Ethernet to the PC.