Search the Community
Showing results for tags 'cj2m cp1h'.
Found 125 results
-
I made an Ethernet connection between an NX1P2 and a CJ2M using network configurator and I already have a real-time data input and output connection in the memory of both plcs. I need to send a 20-byte word and when the NX1P2 is modified in the CJ2M using Sysmac Studio, it receives that string of bits, decompresses each bit to be able to activate the NX1P2 outputs.
-
Olá pessoal. Tenho um CJ2M e CP1H em rede. Preciso trocar informações entre eles. Alguém poderia me ajudar. CJ2M é 192.168.250.1 CP1H é 192.168.250.2 Tentei via NetConfigurator, mas não reconhece o CP1H. Obrigado.
-
Lately I have been having a struggle importing tags into JMobile from a CJ2M CPU31, I can enter tags directly and it works OK, but when I try to import tags nothing works, there are the yellow triangles on all the widgets. I tried to import using the "normal" Ethernet protocol by first making a .CXR file from the global symbol list, it seems to create the dictionary, and I can update the taglist and the tags appear to have the correct datatype and address, but no joy. I also tried the EthernetIP protocol by making a cjf file, funny thing is that worked for a while, but stopped communicating after a while. I have successfully used the EthernetIP import on another CJ2M/Exor eSmart. Any way of troubleshooting this, adding 50+ tags by hand is not very tempting :( Geir
-
I have a problem with CP1H-EX40DT-D-SC unable to connect to cx progrmmer 9.6 in libary, there is no have cpu type. is there a solution in this forum terimakasih
-
Hello. What is the best option using TCP/UDP communication to use CP1L-EM40 as SLAVE / IO Expansion? For MASTER I’m using CJ2M-CPU31. Since now I’ve used FINS _CPU010_SendData and _CPU011_ReceiveData function blocks. The problem is, that I’m communicating with 6 slave IO units and to read/write all 6 units it takes up to 1 – 2 seconds. I’ve tried Ethernet/IP protocol but CP1L units doesn’t support this protocol. Is there some kind of different TCP/UDP protocol which is faster than FINS? In older days you could use PC Link but this protocol is for RS232 / RS485 comm. I know I could use CP1W-EIP61 but I don't have this adapter and I can't afford to buy one Thanks.
-
Hello. Is there some kind of FUNCTION BLOCK to PING IP Device? Thanks. BR, Andrej.
-
Read/Write value of Omron memory area using Ethernet/IP (EIP) protocol
JayPrakashTiwari posted a topic in CX-One
Hello Everyone, I have a Omron CJ2M PLC, and I have configured the Ethernet/IP port of this PLC to communicate over ethernet connection. I want to read/write the DM, HR memory areas of Omron PLC (CJ2M) using eip protocol communication. Is there any protocol specification which explains the telegram structure to be sent over ethernet to be able to read/write the values in omron plc over EIP? I want to know the command structure which can be sent to PLC and PLC will respond with the proper response. -
I see on the forum there are a couple of mentions of netbiter and they seem positive, ive just got one and do not understand how the messaging works. I have tried creating a template just to read D0, i believe i have setup all my IP settings correctly but i am not certain, they are on the same address range for sure. If anyone has used this before and could point me in the right direction that would be great
-
i am new to cp1h and have problems with getting analogs signals inn from input 200
-
can some one post a cp1h pid controller exsampel. i hav trubels and i dont understand manual or the help page in cx-programmer
-
Hi I have servo motor controlled by smartstep 2 and controlled by PLC with pulse output. Origin search I have set as below Sometimes I have problem with correct home position. Normally when original Input signals become ON drive slows and after 1 cm I have home position due to slowning ramp, but somtimes drive stops immediately on the edge of original input sensor. I have no idea why it is like that. Maybe you can advise sth or get some clue thanks in advance for any help
-
I'm trying to exchange some data between two controllers. I've used a manual which describes Tag Datalink communication. Everything works fine on the Bradley side, which means I can read values from Omron without problems. However, on the CJ it isn't working. In the Network Configurator I get error every 10 sec (Tag data ling error, code 03D5) and cannot read any data from AB. When I open Connection Structure Tree I see that the input tagset from AB has 'Broken path (0000000000000)' and Unknown Device right next to IP address. I've tried using EDS from the Rockwell as well as uploading it from AB PLC directly - I don't know if it might be EDS issue. The only thing I noticed that inside CJ2M-EIP21 EDS it says that Ethernet/IP is Class 1 connection, however in the 1769-L35E EDS Ethernet/IP is Class 2 connection. Have anyone ever had such a problem?
-
Hello there. How to transfer data from one memory area to another using macro ? Data Type - Double Word Length - 4 Format - BIN Integer - 3, Decimal - 1 From Area - D To Area - LW
-
Hello fellow tinkerers, Inside our company we're expanding our IoT network with the replacement of CJ1G-H to CJ2M CPU units. When swapping models we are downloading the Datamemories back into the CPU. Our engineer warned us to not download all the DM memories: only up to D20000, so I did. When starting we had some inputs that weren't showing in the Data trace: and noticed that it were pulses shorter than 8ms. We found out the "Unit settings" were back to default and this is not unusual since we only downloaded range D0-D20000 but I'd like to avoid this in the future and look up what each datamemory means. I know D30000 to D31599 are the memories for the CPU bus unit settings (manual W473 section 4-5) but what range is the "unit settings" within these 1600 datamemories? I can't seem to find it in any manual I look into (W473, W472).. Also do you see any problems with downloading the full datamemory range? Kind regards!
-
Hi, I'm trying to use send and receive function. I have to send 2 words from cpu CJ2M CPU33 to CJ1M CPU13. I use enthernet network. I saw a strange thing that if I just use send function then my data goes to second plc without having a receive function. Its that right? I didn't mentioned wich port because I'm not sure wich is. I left for automatic allocation.
-
Hello every one in this video, you will learn about Omron PLC PID Control (CX-Programmer) you could download as free by using the below referral link: Omron PLC PID Control (CX-Programmer) | Udemy I marked free download for 1000 people. I hope it will be useful for you. Regards Mehdi
-
Hi everyone, I am having a problem with a CJ2M-CPU33: when finishing the online edits, it never asks me to store the changed symbols and/or program comments, so they are not updated in the PLC memory and cannot be uploaded later. First time this thing happened to me, I am connecting to dozens of CJ in this factory and it's the first time I've encountered this problems in 16 years.
-
I am probably over looking something simple but I am stuck. I need to count how many containers come down a conveyor and display it in Indusoft Web Studio 2020. I am using a CJ2M to count from a sensor doing an binary incremental long word (++L) Using long word as the count will need to go into the thousands. (not 100% if this is the correct way). My problem is after 99 the value sent to indusoft is not a number but letters or signs. I am sure their is a simple solution but I have given my self a headache and need a little guidance please.
-
hi i am wrting an essay about my final project , i created a scada for omron plc (CJ2M) in factory . ( i am a computer data student ) the thing is , i can't find a good and an easy documentation ( not the CJ2M datasheet ) to talk about the CJ2M component (port and stuff like that) any help please ?
-
Hello, I have to make communication using Ethernet between omron CP1H and siemens s7-1500 plc. I was thinking about Modbus TCP or Ethernet IP using theese adapters: Modbus TCP - CP1W-MODTCP61 Ethernet IP: CP1W-EIP61 But I am quite new in Omron, and I am looking for some exapmple codes, FB. Do you anyone have experience with that? Thanks for all responses.
-
Hello!!! Can somebody explain me how to communicate by ethernet IP between a CJ2M and a FC280? Thank you in advance!!!
-
Hello there, Today i have commissioned my first project with OMRON make PLC. Model: CP1L-EM40DT1D. (CX-Programmer) I have 2 built in 0-10V Analog Inputs on the plc. for analog input no-1 i get the digital value of 0-1000 in specific plc register address corresponding the 0-10V. (Factory setup) But today on site, i have noticed that some miner value of 0 to 50 is always coming and fluctuating very fast in that register, however the transmitter are genetaring 0.0V only (I have checked using digital multimeter with high precision) PLC and Transmitter are already grounded and all the cable connections are tight as well. so how to overcome this high fluctuating value ? is there any setting to filter the input ?
-
Hello! I just got an interesting request from a customer, we have a product line that uses C200H PLCs. The cabinets can operate independently or they can be connected to work in a Master/Slave configuration, the C200 PLCs communicate to each other over RS-232 using LR registers. Back in 2015 we redesigned to use CJ2M PLCs and changed the communication to EthernetIP. Now we have a customer who wants to buy a new slave for an old C200H system, so my question is what are my options for communicating to a C200 with a CJ PLC, I don't have much experience with the C200, that was programmed before my time here, in 2000 I think. Thank you!!!
-
DATE Instruction for CP PLCs View File Sample code to set the RTC on a CP PLC. Individual sections can be enabled/disabled. Submitter photovoltaic Submitted 03/12/21 Category PLC Sample Code
-
