Search the Community

Showing results for tags 'analog wiring'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 108 results

  1. Hi,I am new in project engineering and my previous work is PLC programming only. For experienced engineers, what are the step by step procedure that you use in migrating/upgrading and what are the things that I will avoid?
  2. Help to find out specification of analog card AD-081-V1 . please suggest me this analog input card is active or passive?.
  3. Dear, i am doing one project on Omron PLC with VB.net.  i am using Ethernet communication  with  VB to PLC but i am unable to show analog value on VB page please guide me how to get data of analog value in vb and show in VB.net for DI/DO i am using CIO &H0  forreading   and  &H1 for write but for analog value how i will show on VB.net.
  4.    Have 10 POE Analog Input Modules available on clearance  10/20-channel Voltage Input, Current Input, & Analog Input Module with High Voltage Protection PoE Module, communicable over Modbus TCP and Modbus UDP    Model Number PET-7017-10     Regular price $459.00/EA    Clearance price $344.25/EA   only good on clearance quantity only.   http://www.icpdas-usa.com/pet_7017_10.html      
  5. Hi I am searching for plc having negative analog input and output. i.e. 0 to -10v analog i/p and Analog o/p.  Can any one help me in finding plc which has this feature .  Thank You  
  6. Hi,  i want to read real time and date in simulation mode. How can i do this in Unity pro? Thanks for helping

  7. widadi

    widadi posted a topic in Mitsubishi

    does anyone can help how to connect plc fx2n-16mt with servo drive mr-j2s-40 and motor servo hc-kfs-43 ? please give me wiring schematic thanks a lot
  8. Hi! I have my 1756 IF8 wired in high speed differential mode but i can't configure the RTS smaller than 11 ms. What I understand it should be possible to set as low as 5 ms if module filter setting is 1000 Hz. Is there anything else that i have to do?

  9. Mitsubishi Analog

    francisedetz posted a topic in Mitsubishi

    Good day everyone, I know am quite new in this forum, but... Please has anyone here actually worked with the analog module FX2N-4AD of Mitsubishi?  I have one here with me that I intend to use in controlling a process that will be requiring 4-20mA. Unfortunately, unlike S7-300 or SLC 500, that is quite straight forward, this has been messing with my head since morning. And oh, by the way, am using Version 8 of GX-developer.   Any idea on how to go about navigating this mysterious island will be verily appreciated.   Thanks. Francis
  10. I'm using TM221CE40T PLC with TM3DI16 DI extension. I'm programming it using SoMachine Basic. In the program I implemented a counter (%C0). I've read in the documentation that %Ci.V stores the current count value. I want that to display this value on a Magelis HMIS5T. How could I store the current count value (%Ci.V)? Thanks in advance!
  11. hey!  I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem.  I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use.    I hope you can answer my following questions.    1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial?   this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL)   thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull.    kind regards,    Deuslupos,

  12. FX3G-2AD-BD Store Peak Value

    Swervomotor posted a topic in Mitsubishi

    Good day, I'm new to this forum and to mitsubishi PLC but was hoping for some assistance with a programming issue. I have been through the hardware and programming manuals without luck for this issue. Hardware: FX3G-60mt FX3G-2AD-BE Settings: Structured ladder/FBD Current input mode on: M8260 (first board, first input)   What I need to do is to record the peak value over a cylinder stroke period. The hardware manual explains how to average the value using averaging time, however I basically need to peak hold and send that to a D register for go no-go compare.    Process as follows: Contact closed, monitor D8260, contact open, move peak value from D8260 during monitor duration to D205.    Thanks in advance for any assistance. -Swervomotor  
  13. Hello, does anyone here know what instruction to use to read the analog value from ch0 and display the reading for DVP-10SX plc? I'm lost, need help.

  14. Rajan

    Rajan posted a topic in CX-Programmer

    Hello Experts  I am facing problem with CJ Series Analog I/O module MAD32. The Run LED is Lit, ERC Led is also Lit. what could be the reason?
  15. Having problems with the analog drifting. Over time the counts change. I have checked grounding and have tied the analog common to the DC common which helped clean up the noise. I am using a Balluff analog linear sensor 0 - 10vdc for the iputs. Both channels seems to drift. Any Thoughts?  

  16. Version 1.0.0

    406 downloads

    This is just an example how to convert an analog signal (0-10V)  Library used: AnalogFX_V310
  17. View File FX0N analoge module, scaling and offset. This is just an example how to convert an analog signal (0-10V)  Library used: AnalogFX_V310 Submitter HwT Submitted 03/13/16 Category PLC Sample Code
  18. Greetings, I've been having some issues with a vacuum pump breaker tripping... I think I've figured out the problem and resolved it but I noticed that several of the other motors have current monitoring on the HMI but the person who set this up is no longer with us.  I'm wondering what I need besides an analog input for my control logix processor (which I have) to setup this project.  I'm not sure if the other motors are just monitoring one leg of the 3 phases or if they are somehow showing total current?  any ideas and recommendations would be greatly appreciated.   thanks,
  19. First post. We recently upgraded our machine from an SLC to compactlogix. In the SLC 5/05 we used analog 1746-ni8 cards for pressure and position sensors. When we moved over to the compactlogix 1769 l36erm with 1769-if16c cards we seen issues where the analog values had very little definition accuracy. This can be resolved by changing the filters but then the response time of the card is to slow and we miss data. All of the relevant code from these sensors are in their own task and ive tried periodic, event and continous tasks but none of this helps. The strange thing is with the SLC we never seen these issues. Any ideas how i can improve the reponse time when the filters are set low?
  20. Have a PLC5 project with remote racks with digital and analog I/O. For test purposes have wired AO to AI and have set up the BTW and BTRs. Problem is I put a value in the N11 register for the particular AO (N11:66 - BTW) and it doesn't appear in the other N11 register for the particular AI it is wired to (N11:4 - BTR). The AI - N11:4 continues to read a value of "8259" in decimal/"2042" in BCD, despite any value I put in the AO N11 register. The range of the AO is 4-20 mA with a Raw min of -4095 and a Raw max of 4095 and the range of the corresponding AI is 1-5VDC/4-20 mA. If I remove the wiring arm of the AI, the N11 register will read "4135" decimal. Would appreciate any fdbk as need to get working as system for customer will not be migrated to newer RA or Siemens system til next year. Cant get support out of AB for questions as only have standard "tech connect" tech support contract and PLC5 requires you to have "Legacy automation" tech support added to your "tech connect" stnd contract.
  21. Greetings, I'm ok with RSLOGX 500 but am an absolute beginer with RSLOGIX 5000 and was wondering if anyone had any simple sample code just to study. I would love something using analog input and or analog output. thanks in advance.
  22. https://plus.google.com/u/0/collection/oCtiX To be continued...
  23. I'll set the scene a little before I explain the issue that I am having. I have an application where I have a Linear Servo Slide acting as a Press Kick-off cylinder on a ceramic press. In order to trigger this Slide accurately, I have installed an Absolute Rotary Encoder (a Turck product) to the press, which outputs an Analog signal for its specific position. I then have this as an input into my CompactLogix L33ERM through a 1769-IF4 Analog Input card. Within my code, I'm trying to capture the moment where the press has presented the part out of the die and it can be ejected from the press cavity without damage the part. Mis-timing on this ejection and the part will clip the die pad tooling and incur damage upon ejection. Now, one last point of clarification, I am a Mechanical Engineer by trade, so I don't claim to be an expert programmer. But I have learned a lot and have gained experience in programming applications like this, so I can learn quick and should be able to program this task. I have had my local Allen Bradley guy look at the code I'm using for this application, and he thinks it looks good, but I'm still having issues. What I have done, is within the code, I have a window that I look for, of the encoder's position, to trigger the ejection shoe to fire its sequence and kick the part off. However, I have had to make this window so large in order for the code to see it every press cycle, that occasionally, the ejection shoe will be fired at the back end of the window, which is actually too late, and my part is being damaged. Attached is a snapshot of the code. The OkSamplePress.DN is actually a timer that I have that looks at the current press rate and puts a delay in to not allow the kick-off to fire too early, because I was actually getting a glitch before where the kick-off would fire prematurely for some reason. I don't know if anyone can offer assistance on this or not, but I would greatly appreciate any help at all. Its become quite frustrating, as the rest of my machine functions quite well, and this seems to be the nagging issue I can't get rid of. Thanks in advance...Josh
  24. I've got a PLC stack with a Q64AD analog-digital converter card. I am attempting to read the digital output value of channel 1 but I am having issues. First of all here is my simple PLC program: I got the program from the Q64AD user manual. You can see there is a blue '0' on the right of line 0. I assume this is the value that is being read? When I monitor the D11 device in GX Developer it shows a '0'. The following is a screen from Online > Monitor > Buffer memory batch. My card has a base address of 0x60 and channel 1's offset is 11d (0Bh). The value on the highlighted line does change so I know that the analog card is correctly picking up on current changes from my source. Lastly here is an image of my digital inputs. I have set up the Q64AD card through the GX Developer PLC Parameter window and left all settings as default. I initially used 'K11' instead of 'H0B'. I have also tried using the MOV command (MOV U0\G61 D11) but that game me the same result. Can anyone spot the flaw in my program of configuration? Do I need to configure the PLC in order to use the 'D' devices? Should I try copying the value somewhere other than D11? Thanks

  25. AI and DO Data Acquisition Unit

    Omar27 posted a topic in HMI & SCADA

    Hi, I am looking for a Modbus TCP based AI and DO data acquisition module and scada program. The analog inputs are 4-20 mA . SCADA should be able to communicate over Modbus TCP( I think every SCADA does that but just want to make sure). Can you guys please suggest if you know something good fit my application? Thank you,