Search the Community

Showing results for tags 'tag data link error'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 297 results

  1. FX3U Stop Reading Channel Data

    Sohail Riaz posted a topic in Mitsubishi

    Hello Everyone,  Need help with reading channel data of FX2N-4AD with FX3U Cpu. I have added all the logic and it works also. Problem is that, FROM function stop reading/fetching data from FX2N-4AD after some time i.e couple of hours and value just hang. Like 502 or something, untill you reset the whole PLC. What could be the problem. For the further info, -I have connected the FX2N-4AD on the right of fX3U-64M. -There are two extension blocks FX2N-16EX and FX2N-16EYR also added to the right of FX3U-64M -Order of mounting....FX3U-64M > FX2N-16EX > FX2N-16EYR > FX2N-4AD > FX2N-4AD   I have tried using the 2nd special module connected at the end, but It showed similar problem after few hours of running. THis shows that both Special blocks fx2n-4ad are okay. There is something wrong with PLC maybe? Please help

  2. OMRON CP1L PC Link over Bluetooth

    JoshuaAsitec posted a topic in Omron

    Greetings, My application is utilizing two Omron CP1L PLCs connected through an RS232 serial link to achieve PC Link. We're essentially using this setup to message data between the two PLCs. With a hard-wired link, it works great. I can force bits in the master PLC, and see them in the slave PLC. However our application requires this link to be wireless. We got our hands on two SENA Parani SD1000 units. I've worked with these units previously to connect a serial scanner to a Rockwell PLC quite successfully. After reading through datasheets, we figured out the pin-out from Serial Comms unit fitted to the CP1Ls wasn't quite standard. So we adapted our own cables to re-route VCC and SG appropriately. So with a hard-wired link, this setup works, and the comms units on the PLCs have a nice solid lit up comms light. But with the wireless parani connection, the comms light lights up, but it is very dull compared to the wired link, and we get no data transfer. I've verified to the best of my understanding that the comm settings all match, at 9600 Baud, 8 data bits, 1 stop bit, and Even parity. Just curious if anyone has any suggestions to get this working, or if there are any settings that I might have missed that make PC Link a unique form of RS232 that these parani units can't handle? I've identified online alternative units known as the Promi SD205-OA, which has a pin-out to match the OMRON CP1L PLCs. As far as I can tell though, the units themselves function the same as the Parani SD1000 besides this pin out. Anyone know differently? Presently the serial connections made are Tx -> Rx, Rx -> Tx, Vcc -> Vcc, and SG -> SG. Would I require anymore connections? Our wired link seems to work just fine with just those connections.   Any help would be greatly Appreciated!!

  3. Q02HCPU- Unit Verify Error

    steven-corona posted a topic in Mitsubishi

    Hello to all I have a mitsubishi electric plc Q-series (q02hcpu) with 2 Position card (qd75m4) for controlling 4 servo motor (mr-j2s-350b).  I have a new problem with. PLC after working for a few minutes, The Error light on the CPU  and position card turns on and the PLC STOP Working. Please help me fix the problem VID-20190806-WA0004.mp4

  4. CC Link Inputs (limited to 2 words?)

    NomadAuto posted a topic in Mitsubishi

    Everyone, Using a Q series Mitsu PLC interfacing with a M1P Pilz Safety PLC - and only receiving 32 bits from the SPLC. I have the station setup in GXWorks2 as a device station (occupying 4 stations). I am receiving only the 1st station of the 4 designated. (It is node 9 in the snippet) Any tips on this? (First time posting btw) Thanks, Elliot

  5. Beckhoff´s Error Code 00x4225

    grvchy posted a topic in Other PLCs

    Hello  I am currently trying for testing purposes an Mitsubishi Servo Amplifier M4-J4-TM, which has a Servo motor (also from Mitsubishi) controls to integrate in Beckhoff's TwinCat 3. The controller is directly connected to the computer via EtherCat and is also communication between TwinCat and EtherCAT device is detected. But when I switch to online mode and try to control the engine manually, it always comes the following error message:  Error 51 'TCNC' (500): 'Axis 1' (axis ID: 1): The axis or the drive is not ready for positioning (error code: 0x4225)!  Somehow I miss a step to the valid activation of the engine. ?? In the documentation of Beckhoff and Mitsubishi there is no indication. Actually that should work like that. Has anyone ever had a similar problem and knows about advice? Thanks in advance in advance and many greetings
  6. Hey, I have a 1763 L16BBB...when I plug the 1762IF20F2 analog card in, I get a 0189h error code. Any help would be appreciated. Currently looking at doing a bootp on the plc to get online...no ip

  7. Vijeo Citect - write to tag - error

    Nizami_225 posted a topic in Mitsubishi

    Hi everyone.  In Vijeo Citect SCADA I created some tags and I try to write to a bit device of MELSEQ Q PLC. But I get this error : Cicode General software error. Note: I can read from PLC.
  8. Hi Guys!   Anybody Can help me ? I have a kinetix 6000 servo, and that axis dont want to go in home position. There is an MSO instruction, but the ER bit is active.  What should I do ? What would be the problem?    Thanks in advance!
  9. Hi All, I have an AB servo TLY-A110T and 2097-V31PR0-LM Kinetix 350 drive. I thought that it was fully configured and ready for tuning, but when I issue a MSO it immediately starts to spin the shaft (no load yet). This lasts about a second until a Physical Axis Fault, Excessive Velocity Error occurs. I've double and triple checked the feedback and power wiring, and everything looks right. Is there anything else I can check? What can I do to trouble shoot this if I can't even give an MSO? Any insight is greatly appreciated.
  10. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  11. Hi all,  At my work, we are unfortunately still using GX IEC Developer 7.04. All of a sudden I can no longer open any project at all with my GX IEC Developer. I can start the program just fine, but as soon as I choose a project to open I get "cannot initialize communication manager". And after this, I get another 2 "cannot restore parameter file. param.tmp not found" and "cannot restore transfer setup file! cnct.tmp not found!". Doesn't matter which project. And I have opened these earlier with no problem for years. I have tried reinstalling ALL Mitsubishi software on my PC. And restarting PC. I can't find a link to any other changes I have done on my PC either... Does anyone have any idea how to solve this? Best
  12. Hello people, I hope someone can help me with this. The system is connected with 8 PLC's. I want to transfer the data memory of a PLC to another like this: D850 from PLC2 to D900 PLC1 D850 from PLC3 to D901 PLC1 D850 from PLC4 to D902 PLC1 D850 from PLC5 to D903 PLC1 D850 from PLC6 to D904 PLC1 D850 from PLC7 to D905 PLC1 D850 from PLC8 to D906 PLC1 The data memory is an integer.

  13. Omron PLC problem

    saruans posted a topic in CX-Programmer

    Hello, Maybe somebody know why show this error number and that that mean, how solve this problem? I upload video to youtube https://www.youtube.com/watch?v=Leiya_YreeQ
  14. Hey, I recently started trying my hand at creating function blocks. At the moment I'm trying to create a PID function block, however I keep getting this error: "ERROR: Variable does not have enough size." No idea why it does this. Can anyone help?  
  15. Hello, Completely new to Mitsubishi PLCs and I need to use a date and time stamp for data collection purposes. We have a Siemens PLC as well and this has the data type "Date_And_Time" which is what I need to replicate. I have been attempting to write my own data type but am struggling with how to go about this as it is not straightforward and I cannot find anything about how the Siemens Date_And_Time is made up so I have nothing to go off. Does anyone have an example of a data type they have made that is the same? Or is there a data type which does this already in GX Works 2 that I just can't seem to find?  Please help!
  16. Hi Everyone, I would like to know  if two S7-300 CPU can exchange data via MPI protocol using X_Put and X_Get blocks. is it possible to test the data exchange via PLCSIM to verify. CPU1 = 313C-2DP CPU2 = 312 Please advise. Thank you.

  17. State Machine Based PLC Logic Design

    Madhura Magesh posted a topic in Siemens

    Dear, Folks Greetings of the day                                     I am got very confused in "State Machine" Based Logic design, now am doing Index table based vision inspection system it having 6axis servo, now the major issue is I need to do the better logic with easy error traceability technique. So am chose state machine based system design but the error handling of system is very difficult for me. Any Process automation experts give me the proper solution for this issue or suggest any good book for this state machine error handling concept. Am tried it in web search but I can't get suitable answer < Thanks in advance > 
  18. Hi Everyone, Learning the ropes of SoMachine V4.2 (coming from Arduino and Ucontrollers), I am using a Sequiental step style program and I am receiving 4 error messages. I'm trying to understand why it won't compile.   POU for implicit check is missing. It is recommend to add the POU. C0032: Cannot convert type "IeSFc.SFCStepType(iesfc,3.4.2.0 (systen))'to type BOOL "Same error for a different ladder (the output of ladder rung hits the transition step, the transition is a bool which kicks off the beginning of another ladder rung). C0032: Cannot convert type BOOL to "IeSFc.SFCStepType(iesfc,3.4.2.0 (systen)) Are these two different "data" types?   Thanks in advance!
  19. Hi Everyone,   Learning the ropes of SoMachine V4.2 (coming from Arduino and Ucontrollers), I am using a Sequiental step style program and I am receiving 4 error messages. I'm trying to understand why it won't compile.   POU for implicit check is missing. It is recommend to add the POU. C0032: Cannot convert type "IeSFc.SFCStepType(iesfc,3.4.2.0 (systen))'to type BOOL "Same error for a different ladder (the output of ladder rung hits the transition step, the transition is a bool which kicks off the beginning of another ladder rung). C0032: Cannot convert type BOOL to "IeSFc.SFCStepType(iesfc,3.4.2.0 (systen)) Are these two different "data" types?   Thanks in advance!
  20. Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance!

  21. CC-Link IE Field basic master

    Achey posted a topic in Mitsubishi

    Hi every one, I'm new here. Is there any CC-Link IE field basic master or simulator that can be use on Windows PC, for testing  CC-Link IE field basic slave communication ?   Thanks in advance    
  22. Lets say I worked in a factory that made multiple models of parts. I need to run data tracing on the off shift due to certain models only running on 2nd and 3rd shift. I want one data trace to capture one group of bits at Model 1, Then reset the Data Points and run again for Model 2, Model 3 and so on. So the Bits that I am mapping with the trace need to change.  I can change the trigger easy enough with my program. I see in the manual the CPU has a "separate memory area" for trace settings. Can this area be accessed from the Program so I can set my bit addresses to monitor to a word or E_?   See attached pic for clarification of what I aim to change through the program.   
  23. Insert existing attachment A lot of automation cells we get done are made outside of shop so we don't typically have any current acd files for the plc. I am trying to make changes to the program but uploading seems to be giving me some problems. The initial upload seems to work fine I can select a file to save to and I begin to see the file being upload, the problem comes after about two minutes near the end of the upload. Attached is the error I see after the upload stops. Has anyone seen this problem before and know of a solution? Any help would be appreciated. Current controller Studio 5000 Logix Designer 28.03.00 1756-L71S
  24. Hello everyone, I'm currently trying to communicate  via ethernet with a Parker drive IPA15-HC. I'm using a 5069-L306ER CompactLogix 5380, revision 30.011. There are add-on instructions that allow you to control the drive, but since they're really basic I'm trying to use message instructions to get more data out of it.  The knowledge base provides a zip named IPA_AOI_Rev4, that includes the add-on instructions and the program you should download to the drive to use them, this is the current file downloaded in the drive. Now, I've tried different msg configurations: CIP Data table read, CIP Data table write, CIP Generic copying the values in the examples and I always get the same:  Error Code: 16#0001 Extended Error Code: 16#0000_0125 That extended error code is nowhere to be found, not in the Logix designer online help and not in rockwell's knowledge base. Any idea?

  25. Gt designer2

    choi posted a topic in Mitsubishi

    Good day everyone, i would like to ask for help in GT designer 2, i have an error of "font manager Error" when i run the program and i am using it to access F940GOT an old model of HMI, if there is another program that i can access F940GOT then can you kindly give me a link. thank you in advance