Search the Community

Showing results for tags 'studio'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 162 results

  1. Hi everyone! I am attempting to read EIP tags from an Allen-Bradley ControlLogix from an Omron NX1P2 using the Sysmac Studio function block "CIPUCMMRead." I have been successful in reading arrays and single variables no problem. However, when I want to read arrays from a structure in the Allen-Bradley PLC, I always get an error code in the CIPUCMMRead ErrorID of either 0400 or 1C00 for ErrorID and ErrorIDEx is FF00 2105 depending on what I enter in for Size on the function block (attaching screenshots with both error codes).   The errors show on multiple "read" function blocks at once but it only affects data coming out of the function block where I try to read in a BOOL array from a structure in the ControlLogix PLC. If I enter a UINT#1 for the Size, I get ErrorID 0400. If I enter UINT#2, 3, or 4, I get ErrorID 1C00 with ErrorIDEx being FF00 2105. I've been digging for a while and can't find that specific combo of codes, but it looks like it's a size issue. From what I can tell, the Size is in Bytes. So if I have 32 Bools it should be a Size of UINT#4 max, right? Any help would be greatly appreciated! The function block having issues is setup the exact same as the other two that read from the same structure; I even copied and pasted them from each other and just changed the FB name and the postfix in the SrcDat string (from MyBools to MyDints/MyReals). Here are the screenshot: 1. Allen-Bradley Structure 2. CIPUCMMRead Function Block with size 4 3. CIPUCMMRead Function Block with size 1
  2. Hello,   I'm seeking some guidance and assistance regarding an issue I've encountered while configuring a Proline Promag W 400 flow meter module in Logix Designer. I'm experiencing the following error:   Error Code: 16#0009 Fault Additional Code: 16#0000 Fault Description: Module Configuration Rejected: Parameter Error   I've carefully reviewed the module documentation, verified the wiring connections, and ensured compatibility between the flow meter module (Serial Number: T711F49000) and Studio 5000 Logix Designer (Version 33.00.00 Full Edition). However, I'm still facing this parameter error during the configuration process.   I've also attempted to access the web service provided by the flow meter module to view its configuration and parameter settings, but I haven't been able to identify the specific cause of the error.   I would greatly appreciate any insights or suggestions from the forum members who might have encountered a similar issue or have expertise with the Proline Promag W 400 flow meter module and Logix Designer. Specifically, I'm interested in any troubleshooting steps or guidance that could help resolve the parameter error and successfully configure the module.   https://files.fm/u/brm2ebkry
  3. Hi everyone,  I recently started in the automation industry and am currently working on an Omron project.    So I have two programs, one on Sysmac Studio (which has the HMI) and the other on CX-Programmer. I am trying to simulate both simultaneously using the Sysmac Studio HMI. Is there any way I can do that where for example I can toggle stuff on and off from the Sysmac HMI and get feedback from the CX-Programmer ladder?    Thank you in advance. 
  4. Hi there! This is my first time using Rockwell automation software and I have some questions I can't answer. When I'm running the FactoryTalk runtime application with a simulated controller, I get disconnected from Logix Designer, so I can't online watch the program. If I try to simulate using 'Test Application' in FactoryTalk View Studio, it appears to communicate, but buttons don't make any effect when pressed.   Hope you can throw some light on it! Thanks in advance!  
  5. I have 2 vm’s, 1 with FactoryTalk and 1 with Studio 5000 and Studio 5000 emulate and I need the Factorytalk to communicate with the emulated plc on another vm and wondered if this is possible.
  6. Hello, I am working on a project currently that uses a windows application on a PC to communicate with an NX1P2 controller to read and write variables data. I found a course on Udemy which has a Visual Studio project with OMRON DLLs that are used for these communications. I confirmed with OMRON that they do have official DLLs for this, but the technical support guy has told me he is trying to find them himself.   I have attached a screenshot of the DLL references.  I am really looking for the DLL libraries, aswell as the documentation on their functionality to I can use them to communicate. Any help would be greatly appreciated!  
  7. Hi, I'm Jovel, I'm new to learning how to program PLC. Just want to learn how to use Omron Sysmac Studio . I have a question about the Data Type Data Type - Structure ( Offset Type - Offset Byte )  / Union   I Don't Understand this 2 Data types and how going to use them, can anyone teach me and have a sample program? Thank you
  8. Hi, currently I'm facing a problem between  NB10W-TW01B and NX102-1200 PLC. The problem is after I assign the area/variable using W/H/D and Download it to HMI, The HMI will Pop up PLC Response Error, anyone knows how to fix it ?? I have experience using NB HMI with NX1P2 and NJ PLC, didn't have this error before  
  9.   Replacing dead powerflex 700 with 753 talking via ethernet. Any good instructions on how to update the file from 700 to 753 on rslogix 5000?                                    
  10. Is there any one-shot instruction in sysmac studio? I am running a simulator to test the program but I can not work with LD and LDN instructions.
  11. I have a new PC that is running Windows 10, I have RSLogix 500 loaded and working no problem, along with RSLinx, Factory Talk Activation... etc. I also loaded the Studio 5000 package and it loaded without a problem however will not run. It starts and allows you to pick a project to work on, then will display the Logix 5000 splash window for a second, then just close. No error message, crash or idea of what it is doing, just closes. So far no help from AB, perhaps someone here is running this on Windows 10 or has an idea how to figure out why it is closing. Thanks
  12. I am trying to display the time from an Accumulation timer. Using a data display object I am able to see the time in the following format 00:00:00.0000000. Is there a way to format the time without the decimal seconds I just want to see 00:00:00 (hours:minutes:seconds)
  13. Hi, Does anybody know if its possible to access the "Inhibit Module" tick box within the Hardware Device Connection tab from the PLC code? I'm hoping to turn this on / off depending on whether certain modules of machine are physically installed.  e.g. A Kinetix Drive / Point IO etc. Thanks
  14. Does anyone know how to change the reading on Omron servo motor reading from negative to positive? The encoder is reading negative values when it is moving in the forward direction.  I am using 1S servo on NX1P2 controller on Sysmac studio software.  Please suggest. 
  15. Just added a Keyence IV3 vision sensor to my NX1P2 system and have a little issue with the Tag Set / data structure. The Input and Output assemblies imported with the .eds file are an Input assembly of 101 with 394 byte size and an Output assembly of 242 with a 12 byte size. The problem I have is that the 101 Input assy size of 394 bytes does not allow me the OK/NG status of the vision tools from 17 to 64. I need an additional 6 bytes to access these bits in my data allocation table. My question is, Is it possible to modify this Input assy  to a larger size that is acceptable to the NX1 data structure. I tried just altering the size in my Ethernet IP connections tab and creating the corresponding tags in the data structure and it resolved and transferred OK but then would not allow my IV3 sensor to go online and communicate via Ethernet IP. How can I resolve this?
  16. Hi  I am working on a project in Studio 5000 with 5069-L310ERS2 controller.  How can i simulate the program with RSLogix Emulate 5000?  and When i try to add a new module in RSLogix Emulate 5000 it is only possible to choose version 20. When working in Studio 5000 v32 should I not be able to choose version 32?  Thanks  
  17. Hi there,  I'm downscaling my business in Western Canada and have some legit software licenses I'm going to sell. This was my first thought as to where I might explore selling/transferring licenses, but I'm also open to polite suggestions.  I have: one Studio 5000 Full Edition ESD Software (9324-RLD600ENE) (software & valid license) two Siemens TIA portal software packages & licenses with Step7 v14sp1 and WinCC Comfort Advanced V14sp1 (software & USB dongles) an unused Simatic WinCC SmartServer license (software & USB dongle) one Progea Movicon 11 Scada/HMI developer license (software & USB dongle) one Progea Movicon NExT DEV3-FL (developer license) (software & USB dongle) an unused Progea Movicon NExT Scada license (RTCS3-F-1K+WB3-1K) for site install (software & USB *unused) one package of Schneider Movicon with license (Vijeo Designer, Unity Pro S, and SoMachine) (software & USB keys) Thanks! Mark
  18. HI everyone, I'm new in Sysmac Studio and I entered recently in the IAG creation, I have a question, is it possible to edit directly in the main project (not the IAG project) a label into a IAG? My IAG project is composed by a rectangle and a label on this and i want to see the string that i write when i edit the label directly in the Sysmac.
  19. Hello, everyone! I am following this YouTube tutorial where it teaches you how to add a block of Modbus server within Studio 5000 for communication with plc ControlLogix. The video: https://youtu.be/qcF4m7rPjkw However, according to a comment from the author of the video himself in my comment I can make such a connection through a Modbus device. How do I do this within ur5 and how can i access UR5 inside Studio 5000?
  20. Hi and thanks for youre time  I am a newbie trying to connect to a 1769-L30ERMS using an Ethernet cable. I am using Studio 5000 and RSLinx Classic lite for programming and communication. However Studio 5000 and RSLinx Classic lite are installed on av virtual machine using VMware.  So my problem is two fold. Connect the VM so that it reads from the real computers ethernet port Find and communicate with the PLC from the VM There are guides on how these problems are addressed seperatly. For example https://www.youtube.com/watch?v=JdArYVceO1I and https://www.youtube.com/watch?v=ERLTvcBBK_w however I have not been able to get them to work together. So I was wondering if you, the sages of PLC programming might have some tips or trix that I could test or perhaps even a guide for how to do? Mvh Eric
  21. Hi All,Cx-Supervisor, NJ501-1340, Sysmac Gateway.I have been writing an update for a project and converting to this new controller.It's a pretty big project.Using a combination of Ladder and ST.Using Cx-Supervisor 3.5.I created some new Variables in Studio and made them Publish only.Started to create Points in Supervisor and made them I/O connected to the variables in Studio. No problems everything was connecting and working just fine.Then one of the points would not update. I could change it in the PLC and it would not change On the HMI.I deleted it and recreated it and it did the same thing. (sometimes points in Supervisor just stop working and recreating them fixes it).I then copied the control and pasted the old point into it and it did the same. Then other started to fail. Showing no reaction.I stopped the gateway and restarted, no help, I rebuilt the HMI, nope.The can check the tags in Sysmac gateway and they always change when the PLC changes but not the HMI.I checked the point maintenance in Supervisor and it would not change.I dumped all the affected variable in the PLC and in the HMI and recreated them. Then it got stranger.I could change some on the HMI and it would show in the PLC but not the other way.This is on Bools and UINTS.Stopped CX-server, tried using it with Win8 compatibility. nope.Pulling my hair out now. I should be coding but I'm trying to get the apps to work.Any ideas will be used with thanks.Peter
  22. Hello, I guess everyone knows the current availability situation with electronic parts. Due to this reason I'am looking for alternatives for the Omron NA-Panel series. I'am curious if you guys already made some good or bad experiences with third party HMIs in combination with NJ/NX PLCs. It would be a pleasure if you could indicate some brands that will work.   Thank you in advance.
  23. I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas?

  24. Unable to delete a screen

    lqu@edgeautomation.ca posted a topic in Allen Bradley / Rockwell Automation

    Hello AB professionals, I am using FactoryTalk View Studio v11. I am basing on an old project to build my application. I restored the project from a .mer file. I deleted or renamed some old screens, saved and closed the project. But when I open the project next time the screens I deleted still show up. When I click on it it will show an error message "Component does not exist".  In the FactoryTalk ME application, I right click a screen name on the left tree under the Graphics, and then click "Delete" or "Remove", the display would disappear at that time. But it persists on coming back next time I open the project. If you know the solution to resolve please reply. It is much appreciated.   Thank you. Lei
  25. I'm working on a program where I manipulate REAL numbers in Sysmac studio using an NX1029020 PLC. My problem is I am new to automation and I don´t know how to display those numbers when connecting to an NB HMI. I´m trying to send the data to a bar picture and a number display. My question is which AT Specification Attribute should I assign to my variables in Sysmac Studio and their corresponding Area in NB-Designer? I tried using the DM area but it didn't show numbers on the displays, only shows *****. Should I convert my real variables in Sysmac first? Or how can I keep decimal numbers and then display them? My current configuration in Sysmac: Name Data type AT Network publish ST1 REAL %D5 Publish Only ST2 REAL %D3 Publish Only My current configuration in NB-Designer Bar Picture Addr. Type D Address 3 Code type BIN Number Display Addr. Type D Address 3 Code type BIN Data type Float Integer 4 Decimal 2