Search the Community

Showing results for tags 'rs485 connection'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 75 results

  1. Hmi temperature delta

    I have connected 2 temperature devices with him delta with plc delta by rs485. When I run plc I can see the temperature change on pc but the problem in hmi  it's give errors. Com 2 errors  I need someone help me to connect these devices please 
  2. TCP connection

    I need to connect a A/B 5370 or 1756 to a PC and communicate over TCP/IP and be able to read and write input/outputs. What features does A/B provide? I would prefer to write in C/C++ but can also consider Structured Text - if it supports the standard socket type functions.
  3. UNABLE TO MAKE CONNECTION

    TRENDS ARE NOT SHOWING ON MY FTVIEW SE V8 . AS DATALOG MODEL STARTS IT SHOWS UNABLE TO MAKE CONNECTION IN DIAGNOSTIC VIEWER .  YOU CAN CHECK THE SCREENSHOT FOR THE SAME . I THINK DATALOG MODEL IS NOT ABLE TO CONNECT TO SQL DATABASE . WHAT MIGHT BE THE PROBLEM ? Please Help Guys .....
  4. modbus_fb_11.pdfHello to everybody. I'm new I download from Omron France the FB to read form one or more instrument some register by Mod Bus RTU Every things is working well, but some register from the Instrument are on REAL. How i can get a REAL word with the FB on the attachment? Thank you   Modbus_03_Read_Holding_Regs.cxf
  5. Omron rs485 communication

    I am using OMRON CJ2M-CPU15 with SCU41-V1 communication module I want to establish communication (rs485 modbus) between omron and Schneider device for reading out electrical parameters. How I can do this? I could not find any manuals and this is becoming very hard for me. I want simply to read few registers from Schneider. Where do I set unit number, starting register, ending register, number of data? I was recently using Siemens and Unitronix and started working with Omron recenlty. Do you have any examples or manuals for this? Thanks in advance
  6. HI all,   I was trying to connect my compass with PLC via SCU32 RS485 (2 wire ) in protocol macros.[ Unit 1 port2]  My send command is   " 01 03 00 01 00 03 54 0B'  &  Expected reply is '01 03 06 XX XX YY YY ZZ ZZ ZZ ZZ" I created a new protocol using CX protocol and created  a send message & a receive message command  and added to sequence 000. (refer pics) Also added PMCR instrcution in cx programmer (refer pic). I can transmit the data , but i cant see any recieve data in D2000. I am not sure what had done wrong, or am i missing something?   Any help is much appreciated!! compass_macro2.psw Compass_TEST.cxp
  7. Please could you assist with the software required to download data tables from 4 off DIRIS A10 Multifunction Meters into TM221CE40R Logic Controller via TMC2SL1 Comms Cartridge using Modbus Protocol over RS485. I have downloaded the Modbus tables from Socomec but not sure how to get these into the PLC. I would really appreciate your help in achieving this. I am using EcoStruxure Machine Expert - Basic to program the PLC & DAQ Factory Developer Release for my Touchscreen. Link to Socomec Modbus tables: https://www.socomec.com/files/live/sites/systemsite/files/SCP/6_gestion_energie/diris/diris_a10/DIRIS-A-10_COMMUNICATION-TABLE_2018-01_DCG01013_MULTI.html#General
  8. hi all,  I am using SCU32 ( unit1, port2, 2wire and termination OFF)  to get the RS485 data strings from the compass with setting 19200bps, 8 databit, 1 stop bit &  No parity. I can send the TX string ( 01 03 00 01 00 03 54 0B)  from D100 memory and  write the Rx data to D2000 (01 03 06 xx xx yy yy zz zz CC CC). But the whenever the there is no RX data, The TXdata bounce back to RX. (refer to video, d100 is TX, D2000 is RX). I also tried wth SCU32 termination resistance ON. Same thing. I am not sure what is missing. Should i use different logical Port for TX and RX ?    EDITED: Just tried another scenarios  1) removed the connector and tried , D2000 - was written the TX values  2) Disable the RX  changing  LD from P_On to P_Off. D2000 - was written to #0000 0000 0000 0000  I am not sure what is  happening., Open connection also TX data bounce back to RX   Appreciate all help Thanks a lot  video1.mp4
  9. Hello All,  Am a bit new to practical PLC applications. I was trying to configure a Phoenix Contact I/O module (1452916) on a MicroLogix 1100 PLC but it kept faulting out with the fault light RED. It would say "Major Error Halt S:1/13". The error description says I/O mismatch. The error code is 187h (see attachment). The Phoenix module has a cable with 19 pin positions for the 8 input. I connected the pin 17 and 18 to 24 volts and  0 volts respectively. Then because I was using input 5 I connected the pink wire to PLC input (I/1) 24volts and the White/Yellow wire to the PLC common.  On the I/O configuration on RSLogix 500, I used "Other" ( See attachment) but did not know the vendor details. Could anyone help me with the steps on how to communicate with the module? I have also attached the PLC program I was running. Thanks        
  10. Hello, I have been so many days trying to comunicate the multiway software trought a serial usb converter with the SCU31 device, using a omron function block to read a holding register, but I can't achieved it. Now Im receiving some frames on multiway, but there is always some errors. I was wondering if somebody in here that have worked previously with modbus and omron can be able to help me in how to configure everything corectly to be able to read the value from multiway, on the plc, and where is this value saved.  I'll upload some captures to show what I have done till now.    
  11. RS232 converter to RS485

    Hi dears i have one cp340 (340-1AH02) that is modbus RS232 RTU master and one RS485 RTU slave. i want to use RS232 to RS485 converter is it ok? can i do this without any problem?
  12. Hi dears i have one client and 21 servers i want to eatablish a connection between this client and servers is there limitation for access servers? i read that one client can access to 12 servers only is it true? what is the best way to connect this client to 21 servers? best regards
  13. Genst,   Could You please advise how can I connect to CJ1M CPU12 - shown in attached picture. DB9 port is used for communication with remote input/outpus rack. There is this small portabove DB9, but first I don't know what cable should I use and seconde I don't know if it is possible to usi this port when PLC talks on DB9 with remote input/output rack. I want to connect to CX-programmer to be able to online troubleshoot PLc program.   thanks in advance. tomasz  
  14. RS485 to Scale

    Hi guys, I'm trying to communicate with a scale controller (Rice Lake ACT20-AN) to read gross weight. Scale controller: RS485, ASCII bidirectional protocol, Baud 9600, Address 1, Delay 0, Parity None, Stop 1 PLC: Channel 1, Data Bit 7 (unclear if it should be 7/8), Parity None, Stop 1, Sum check code Exist, 9600bps, Non procedural protocol (should this be bidirectional?), Station number 2 (should this be different than scale?) I am using $Movp "$01t75CR" D6050, Movp K1 D6000, Movp K4 D6002, G.Output U8 D6000 D6050 M7000 which seems to work okay since M7001 does not turn on? I do not get any data, however, when running Movp K1 D6100, Movp k7 D6102, G.Input U8 D6100 D6150 M7100 at the same time as the G.Output instruction. I have attached the PLC program. Also, for wiring I wired the RS485+ to SDB and RDB, then RS485- to SDA and RDA as suggested by the scale controller manual. I then grounded the cable shielding along with SG and both FG connections.   Any help would be appreciated in figuring this out, thank you!  Scale_111219.gxw
  15. Hi,  I have a problem with modbus communication. I set everything as shown in the pictures and I get a error 04. What is wrong ? program.bmp ustawienia.bmp
  16. Janitza UMG96RM RS485 Bus

    Dear All.     i'm a new user for Janitza. and i have issue related to RS485 actually, not to Janitza itself. i have one device (UMG 96RM), where there is only RS485 (2 pin only), no RS232, no USB, No Ethernet port. i'm trying simply to connect the device to the PC, via (USB to RS485) convertor, but i'm not able to do it. for me, this is the first time i'm see (RS485 2 Pins), usually there is Ground signal also. anyway, could you please somebody help how to connect? shall i add a pull up & pull down resistors at the device? and what is the power supply i must use? noting that, i tried many things, but still nothing happened.   Appreciate if somebody can help   Best regards.  
  17. Hi I'm trying to figure out how to use the OP320-A to control the relays on the FX1N-20MR. I have mastered the OP edit tool, but I havn't learnt how to use GX Developer. The FX3U and op320 by 485 setting youtube is a good start. Does anyone have a GX Developer project file available. Is there an OP320 and FX1N or similar that comes together, pre-programmed, ready to use. I know how to write C++ programs to send RS485 commands, but this GX developer looks complicated. many thanks Tim
  18. Cannot get Online - CPM2C

    Hello Ladies and Gents, Im quite new to working with Omron. I am struggling very much to get online with an Omron CPM2C-S110C. It has a CIF01 card also. I hear this PLC is quite an old one. I have referenced the manual on 'connecting a computer running support software' and double checked I have the correct cables. The ones I am using and the way I am connecting is:-   PLC Peripheral slot >> CS1W-CN118 >> XW2Z-200S-CV >> serial to USB >> Laptop Checking on Device Manager, I have all the drivers installed, the comms ports are correctly numbered yet I still cannot connect. There are 4 dip switches on the top right hand side of the CPU and all are swiched off. I have called Omron Tech Support and they said to ignore them in this instance. The RS232C port on the CIF01 is used by a barcode scanner so there is no means to connect through that (I have been told) I feel that I have been through setting and checked in CX-Programmer and nothing looks obscure. Please offer me any ideas you may have. I would greatly appreciate it. Thank you.
  19. FX3GA-60MT Modbus RS485 as Slave

    Can Mitsubishi FX3GA-60MT PLC be used as Modbus RS485 Slave? Any sample code or documentation would be very helpful. I am planning to communicate to Weintek HMI (Modbus RS485 master) to FX3GA-60MT PLC (Modbus RS485 Slave). Any other ideas would be nice. Thanks
  20. Good Evening, using the Ethernet Built-in LAN I need to program 4 power supply. I'm tryng to program the firstone but even if I can send the correct command to the power supply I always recive a 2006 error on SKTTCPRCP function Is there someone that can help me in order to not receive the 2006 error code? Have I to respect a procedure? It seems that at the second connection time the socket remain closed. Thank you!
  21. So I need to find a way for a Mitsubishi PLC to communicate with a PC - ideally sending a binary number through ethernet to a PC program that reads it and tells the PC which files to open. I think I can create the PC program with C++ or Visual Basic without too much struggle. But I am unsure of how to get that binary ID from the PLC and into the PC program. I have done a little bit of research on MX Component and MX Sheet, and also MC Protocol but all seem a bit outdated and/or just over my head and I need some better explanation - I'm pretty new to PLC and programming. I feel like it shouldn't be terribly difficult to get 1 external binary number into a PC program. I'm sure someone has done essentially the same transfer and I just want some ideas. -What kind of connection support do I need to transfer data (Likely just a D-bit) from a PLC to PC? -How would that/those bit(s) be accessed in Visual Basic or C++? I'm assuming some type of library function that will call the value
  22. Hallo, i want to connect Omron PLC CP1E use CP1W-CIF11 to AD4329A with RS485 communication.  my wiring is CP1w-CIF11     AD4329A SDA-                  SDA & RDA SDB-                 SDB & RDB and until now, i cant get data from AD4329A. Do you have any clue for this project?   Thank you Riandanu PLC to 4329A coba.cxp ad4329aex.pdf
  23. Hi Friends, In My new project I have used two Delta PLC'S (DVP-60ES2 and DVP 14SS2) I want to communicate both through RS 485 Communication protocol.We have  tried communication trough manual help.But Master Slave device not communicating.We have checked for any error code in D1130 but it always showning "K0" value.here with I have attached screen shots and complete program for yours kind reference.Kindly help and guide us to communicate.   Master.pdf RS485 master trail 1.dvp Rs485 trail 1 slave.dvp Slave.pdf
  24. Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
  25. Modbus Addressing in Weintek HMI

    Modbus addressing in Weintek HMI to poll data from Temperature sensor through RS485. In my system i have connected Temperature sensor to I/O Scanner has output in terms of RS-485 which directly connected to COM3 Port pin. No. 6 (as Negative) & 9 (as Positive) of HMI (Model No: MT8071iE) and HMI connected to PC via ETHERNET. I want to read temp on HMI screen via MODBUS protocol. So, can you please provide me instruction about addressing of MODBUS register in Easy-Builder Software so can read data of corresponding register. Because when i do compile i got an error like " Device no Response". I hope i will get reply from your side as Fast as possible to overcome this problem. Thank you.