Search the Community

Showing results for tags 'problem remote communication %28input which is not displayed%29 via devicenet'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 283 results

  1. I am trying to POST API to a meter in Maximo using a socket in a 5069-L320 controller. I am able to successfully create and open the socket. The write and read instructions get the DN bit but I do not see the meter updating in Maximo. I was able POST successfully using Postman, so I know I am sending the correct information. Do I need to be formatting the POST differently? I'm not getting errors so don't have a direction to go from here. (I will fix the obvious username and password vulnerability, one step at a time) Thanks
  2. Hello Everyone I am new on this forum. As an electrician in Denmark, I have just gotten a fountain to maintain. The control cabinet and pumps are all underground in a couple of wells.   There are a lot of monitoring and time is spend / wasted lifting the heavy manhole covers and driving to and from the wells. I would like to install a plc to monitor the few settings I really need. Are there some with experience of how and what type of equipment?  I am considering a siemens LOGO with a communications module and just buy a sim card.  Is it better to use prepaid 2G, 3G or 4G or only data sim card?  Also with or without pin code? It is not possible to establish a wired communication connection but the wells have of course 230 V mains and is very close to a phone tower. Yours faithfully Morten Lund

  3. CP1E won't connect or run program

    Robror posted a topic in Omron

    Hi there! Today a CP1E-E10DR-D suddenly stopped working. RUN led was off and I couldn't connect to it via USB getting this error: "Selected port does not exist. Select proper port number from Change PLC dialog and press OK button", and automatic online function didn't work as well(it's not a cable/driver problem since I successfully connected to a CJ2 CPU using same cable and PC). Since I also tried to connect with the CPU outside the control cabinet with no success, I asume there is something wrong at hardware level.  My question is, have you ever faced something like this? My plan is to try to revive it somehow (maybe trying to locate any defective component in the PCBs or something). So I was just wondering if you have any advice in order to achieve it.  Thanks in advance!

  4. Hmi modbus TCP/IP device communication

    mustafa.celik posted a topic in HMI & SCADA

    Hi all; I have Delta DOP110 IS hmi and i have a modbus tcp device. I want to communicate hmi and device with modbus tcp/ip but i didnt understand device's register address. For example, input bytes 0,1 analogue control word, What is the register address? 40.000 or 40.001 can you help me ?  
  5. Hello! I am working on a quote for a new project that will use EtherCAT but also requires DeviceNet for some legacy components.  Has anyone successfully used the Beckhoff EtherCAT coupler (EK1100) with the DeviceNet Master Terminal (EL6752) and an Omron PLC as the EtherCAT master? My concern is that the coupler will only communicate with the Beckhoff EtherCAT master, but since it is so much more expensive to get the new Omron parts to communicate DeviceNET i am hoping this could be an option.  The equipment is extremely simple and price is a major consideration.   Thank you!!!

  6. HOSTLink read multiple DMs

    tingxing posted a topic in Omron

      Hello,    I am using Hostlink protocol to read data from PLC units. for example @00RD22220001..., will return DM2222's value. But I want to know, if I could read multiple DM values at the same time. for example: DM2222, DM3000, DM4000, reading these DMs with one communication. Please note that these are not continuous DM areas. I know a sequence of DMs can be read by specifying starting address and count.   Many thanks in advance.   Ting              

  7. Samsung n700 plus

    Samsung2 posted a topic in Other PLCs

    Hi everyone,after initializing  cpu in Samsung n700 plus ,I can't  enter variable value in hmi and all parameters is zero. Again I load program to cpu but not success. please help me.and I need manual for n700 plus plc .
  8. Here is a post that we recently completed on the Automation Direct USB to RS485 Adapter.  The USB-485M is a 2-wire USB to RS-485 serial communication adapter for RS485 use. It does not require an external power supply or complicated configuration. It has a Type A (plug) USB connector for the computer side and a universal female RJ45/RJ12 modular connector. This will accept RJ12 and RJ45 plugs.  The USB-485M supports multiple baud rates and is USB V2.0 Compliant. Read the rest of the post... YouTube Video on the installation and communication to a Solo Process Temperature Controller via Modbus RTU. https://www.youtube.com/watch?v=aWE05ZNZNXw Let me know what you think, Garry www.accautomation.ca  

  9. RS485 COmmunication

    zubair136 posted a topic in Mitsubishi

    Hi all, i am looking for a solution to connect 7 plc with a single scada. is it possible according to my topology diagram ?   Kindly make me suggestion and if you have any information regarding the solution then share .   Thanks in advance. 
  10. Good Morning,   My name is Joseph Rhodes, I work as an electronic technician for the City of Tuscaloosa at the wastewater treatment plant. I work to keep the plant up and running as well as 64 lift stations spread out around Tuscaloosa, Alabama. A majority of our lift stations utilize Verizon Cell Modems, RV50s to be exact. It's rather easy connecting remotely to these lift stations as I can configure a driver as an ethernet / ip driver then associate an IP of that lift station (ex. 10.181.3.104 is lift station 104, 10.181.3.105 is lift station 105, etc). However, for the lift stations that do not utilize cell modems. We use GE MDS 9710 and 9810 radios. It is these lift stations that I have yet to figure out a way to connect remotely to the LS RTU PLC. All of our lift stations use Allen Bradley MicroLogix 1200s or 1400s. These lift stations that use the MDS radios communicate information to water tanks then that information is sent back through other channels. I was wondering is there a way to associate these lift stations on RSLinx that use GE MDS radios ?   
  11. Hi all, I am trying to communicate KEPServerEX with FX3GE vis UDP protocol. I have tried but unable to get data on Kepserver. While configuring communication properties in PLC we have configured PLC IP, PLC Port, Destination IP, but unable to find correct Destination Port. Although we tried various port nos like 49320, 57412, 57512, 56233, 1025, 32402, 57212, 57012, 57612, 57812 but there was bad quality data using UDP For same PLC using TCP/IP we were able to read all tags properly. This change in communication protocol is required as there are some PLCs whose communication port drops after few days of connection establishment (no error logged; can be re established with just restart). Someone from Mitsubishi said to try communication via UDP as it continuously fetch data regardless of kind of response received. If anybody has tried or have any solution, please do share.   Thanks
  12. Hello, I would like to know the best option for adding remote I/O stations to either the R32CPU or R32ENCPU. I like the look of the Mitsubishi NZ2FT / Weidmuller u-remote slice I/O. I believe they are the same product. There are CC-Link IE TSN network couplers for these systems. Would either of these be a good choice? I see the R32CPU has a port supporting CC-Link IE Field Basic. Can I communicate with CC-Link IE TSN devices using this port? The R32ENCPU add a couple of ports which can support regular TCP/IP communications, CC-Link IE Field and CC-Link IE Control. Do these ports also support communications with CC-Link IE TSN devices? Is there a difference between CC-Link IE Field Basic and CC-Link IE Field? Thanks,
  13. Hi, I managed to communicate a Kinco HMI with a Xinje PLC (XC3-48R) using RS-232. Also, I've established connections between the both equipment and my personal PC, for programming purposes. Currently the uploading and downloading, PLC bits reading and writing happens normally. But, when I disconnect any of the equipment from the PC, (HMI or PLC), the communication is lost between the PLC and HMI.  How can I solve this and, remove my PC from the network by making the HMI master and PLC slave ?    The software I use for programming is, (XCP Pro, Kinco HMIware)  

  14. FX3GE Communication issue

    vikrantragit05 posted a topic in Mitsubishi

    Hi all, There's an issue I am facing for multiple FX3GE PLCs in a plant. Communication breaks between a PLC and OPC server. PLCs after few days (4-10) does not respond over ethernet. No ping response is received over network as well as when checked one to one direct connection. If I restart the PLC the connection is resumed and again after some days it goes down. Error LED on ethernet port does not glow red (no indication for error). If anybody has faced similar issue and has resolved, please share.

  15. NS Runtime 1.30 v 8.1

    pszczepan posted a topic in Other Omron Software

    Hi  I prepared test application (attachment) and all the time when I start Runtime I get error: "Failed to initialize communication processing. Exit the application except Run and re-start the system." I think I did everything correct. Below my specs. CX Designer 3.730 NS Runtime 1.30 NS Runtime is on PC WIN7 64 bit  res. 1024x768 Maybe you can help to find the problem     test3.7z

  16. Serial communication with KINCO PLC

    Francisco1998 posted a topic in Other PLCs

    Hello to everyone. Nice to meet you all. I am programming a KINCO PLC model HP043-20DT using ladder on KINCO BUILDER. I need to establish a serial communication with my PC. The PLC has a RS485 port which I adapted it to USB to connect with my PC. The PLC allows, at least, two ways to establish serial communication: MODBUS or free-protocol. I've read the software manual and tried to reproduce the examples it provides using the instruction blocks for MODBUS (MBUSR and MBUSW) and free-protocol (XMT and RCV) communications. However, I could not receive the data on the PLC. I could effectively transmit data with XMT from the PLC to the PC and I could verify through a tool called Access Port. In relation to MODBUS, I am using a simulation tool called Multiway from OMRON, however, I get no response from the PLC. If any of you have some experience with this software or this device, I would like to ask you how could I solve the problem. Thank you for your attention. Kind regards.

  17. Memory registers on KINCO PLC

    Francisco1998 posted a topic in Other PLCs

    Hello to everyone. I hope you are doing well. I have a KINCO PLC HP043-20DT. I'm communicating through free-protocol instructions XMT and RCV. The manual states that memory registers SMB86, SMB186 and SMB286 contain information about the state of the reception instruction. I would like to ask if any of you know of the existence of an analog register but with respect to the transmission instruction, instead of the reception. The manual does not indicate it and I could not find any information online. I've sended an email to the manufacturer but, until now, I have not receive any answer. Otherwise, how could I search for this information? I tried through the manual providede by the manufacturer, but maybe there is other way. I would appreciate any information. Thank you so much. Kind regards.
  18. I have a devicenet network with a compactlogix L35E and  a 1769 scanner in the main cabinet and a 1769 adn/b module in another cabinet that originally got burned, it was replaced with another adn module with same revision as the original but can't connect on the network, I can see the scanner but nothing else when I scan the devicenet network with both rslinx and rsnetworx. I'm also seeing fault 79 on the scanner. Any suggestions on how to approach this? I read that most issues relate to hardware, as in wiring, terminator resistors and power supply grounding but I already checked all that.  Any help is very much appreciated.  

  19. Remote Omron and Yaskawa control

    sasha posted a topic in Omron

    Information : On the websites - https://abrysshost.web.app (and https://abrysshost .firebaseapp.com ) detailed information about the construction of remote diagnostics and control (Iot) systems for control systems of objects based on OMRON and Yaskawa controllers. The information is presented in Russian and English.
  20. Hi Guys, I need to send temperature data from PLC to LED Display through RS-485 communication, so How can I proceed further in this. Please guide me Thanks in advance

  21. Fatek PLC Communication Problem

    zubair136 posted a topic in Other PLCs

    hy all. i am having an error while communicating with fatek plc. when i communicate it gives an error. " Com port open fail, plz check if this port is used by other programme when we online the PLC (Fatek/ WinProLadder). kindly Guide me   as it looks like port is already used by another program . and i dont know how to kill that program ..       

  22. Reading inputs using FINS/TCP from a PC

    franckcl posted a topic in Omron

    Hello, I'm trying to read data from a PLC using TCP/FINS protocol. I am able to read the data in the memory area from a supervisor PC (using command 01 01) but I do not know how to read the information specific to this machine. Extract from the machine manufacturer's document: Name Data type Address/Value Usage comment Loc_in1 BOOL 1.00 In Local Input 1 Loc_in2 BOOL 1.01 In Local Input 2 Loc_in3 BOOL 1.02 In Local Input 3 UPS BOOL 3.00 Work UPS Input Int1 BOOL 3.01 Work Interlock 1 Int2 BOOL 3.02 Work Interlock 2 T1_LSB CHANNEL D20 Work UPS Hold time LSB T1_MSB CHANNEL D21 Work UPS Hold time MSB REM_1 BOOL H0.00 Work Remote input 1 REM_2 BOOL H0.01 Work Remote input 2 REM_3 BOOL H0.02 Work Remote input 3   This is the document I've written to understand the protocol: 1st frame to send: 46,49,4E,53 : ‘FINS’ 00,00,00,1A : Length(8 de l’entête + 18 de la chaine qui suit) 00,00,00,02 : Cmd (2) 00,00,00,00 : Error code (0)   Second frame to send 80,00,02,00 : ICF + RSV + GCT + DNA 0F : DA1-FINS node address of Ethernet unit (Server node=15) 00 : DA2-Destination machine address (0=PLC Main unit-CPU) 00 : SNA-Source FINS network address (0) FB : SA1-FINS node address on the PC side (Client node=251) 00 : SA2-Source FINS network address 01 : SID-any data from the source process identifier 01,01 : MRC,SRC-FINS command code 0101: Read memory areas 82 : Memeory area=Variable type: DM (Dxxxxx) 00,14,00 : Read start address (20) 00,01 : count (1) This shoud send the UPS hold time but everything is at  zero. Who could help me ? What is wrong ? Thanks  

  23. Delta plc AS228R

    sarel posted a topic in Other PLCs

    hi i have a as228r delta plc and i want to connect it to two endress & hauser D400 flow meters over ethernet can anyone please give me sample code for ispsoft. the flow meters do have ethernet connections.  i want to read flow rate and flow total on the flow meters  please thanks
  24. Hi, I am using IQ-R Series "R16ENCPU" With Inbuild CC-LINK IE FIELD "RJ71EN71" and attached CC-LINK "RJ61BT11". Problem is, Even though my remote IO cards are in Online connected with masters, I cannot able to On/OFF Remote Device station IOs in CC-Link IE FIELD network. But CC-Link Normal is working fine. Refresh settings and Network Config Settings are done, Below attached the pics for reference. I cannot able to find the problem, Can anyone help me in this.  
  25. Are you working with networks for automation – and operational technology? Are you involved in planning, commissioning or maintaining industrial networks? We are looking for experts for operational technology networks like you for an online interview. We want to understand, how you work, what steps you take while working with your network/s and what you need to work well. The remote interview is going to take around 120 minutes and should take place between 09/14 and 09/30. For your time expenditure you will get a compensation of 200€. The interview will take place online via Zoom or Teams. We are counting on your support as an expert. If you are interested I am looking forward to your response, either via this forum or via eMail to j.walter@custom-interactions.com Let me know if you have any further questions! :)