Search the Community
Showing results for tags 'mitsubishi servo drive'.
Found 465 results
-
Hi I'm quite new to plc but very new to mitsubishi. I have an input string eg G+002.7 which represents a weight. I wish to take in the input string then move/convert to int omitting first char, On other plc's i have been able to use a modifier like d200[2] then the no of chars. How do i achieve this in gx works3 Any feedback gratefully recieved Paul
-
hi good day, i have problem to reset my admin password in melsec GOT1000. it's because i didn't remember my old password. please help me to solve this problem
-
Hello Experts We have a machine with Mitsubishi Servo MR-JE-2008 With PLC Fx 5U & HMI GS2107 Yesterday we altered PLC by adding a row with input and timer & used this Input in next rung for weld start Although we did not find any linkage but found "'Screen error Ok"' on HMI and after pressing Ok, HMI screen getting blank. We restored original PLC backup - PLC in Run Mode still ""Screen error Ok"" on HMI Via GT designer 3, we have loaded HMI backup, now HMI screen is OK and normal Getting Ab on Mitsubishi drive - we feel it is not an error but due to this we are unable to rotate motor although other functions like door open/close etc Ok In PLC, online mode, we are finding Servo in ON but unable to understand Ab on Drive and may be due to this, unable to rotate motor Please refer to attached HMI, PLC & Servo Backup Request advice HMI BACK UP.GTX PLC BACKUP.gx3 Flange Welding_Tag Line Servo Backup.mrc2
-
Hi Everyone. I have been tasked with changing out an older Flex Drive servo drive to a more modern Micro Flex drive in a machine that has an Omron CQM1H-CPU51 PLC. I'm having a few issues but hope that i can gain some clarity around at least one of the hurdles Im facing from here. Biggest issue for me at this moment is My work hasn't yet purchased a programming lead for this PLC (or even the bits required to make one myself) but i have a feeling the control for the Servo is done via motion control in the PLC. Question here is, if changing from one servo drive to another type, will the motion control code need to be updated to work with the new servo drive? I have very limited experience with motion control itself at this stage so I'm a bit lost when it comes to these sort of details. Regards Kiwi_man82
-
Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked. I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code. The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
-
Hello everyone I need help to Convert FX 5U program to FX 3U Plc. Is there any way to do so???
-
Hello everyone I have Mitsubishi HMI GS2110 WTBD- N. It is connected with FX5U with Ethernet protocol. I want to run a printer directly from HMI with RS 232 without using RS232 adapter card. Can someone please help me what to do and how to do. Regards
-
is there is a function built in to convert chars like "XYZ.." to hex and vice versa ?? I am new to the iQ-R series and trying to figure it out, the GX-Works version that I am using is 1.038Q any help would be appreciated
-
Dear All , i Have FX3uc-64mt/d plc. i am getting confused about its wiring . In manual it is mentioned that plc can be run on both sink and source while when i connect only OV to any pin it indicates the input high. although no signal is given to common terminal . can anybody explain me this phenomenon. thanks in advance.
-
Hi. I am using PLC Q06UDV wit QD77GF to operate 11 servos, it is my first time using QD77GF and CC-Link IE Field. I've done the parameter setting. but the qd77gf error lamp started to blinking. i try to check it in cc link ie field diagnostic and didn't find anything except the error lamp blinking in monitor view. then i checked system diagnostic , no error showing up but, only historical error when i started the power of plc. it show D304 error. in manual book the solution are lengthen the operation cycle qd77gf, check the cable, and shorten plc scan time. where can i find this setting sir?
-
Hello everyone, i am making a weight batching system , my system consists of 9 tanks each tank have a specific raw material , the user should be able to add a formula through scada system so he will be able to specify each weight of each ingredient to add to the formula. i have managed a connection between my weight indicator (pt650d) and my plc (fx3g) through fx3g232bd module (RS232 communication) , the weight indicator send data in ASCII to plc that we can show on the scada system . so how can i change the ASCII numbers that come from the weight indicator to Decimal number without changing the value so i can control a barrel that will add raw material from the tank to the scale untill it reaches what the user specify in the scada ??
-
Hello all, I am new to using Mitsubishi and I am having issues communicating with my Cognex Camera. I have the camera configured in Datamn Setup Tool. I have the Ethernet card configured and validated. I am able to ping both devices and get a response on the network. However, I received an SLMP failure in Dataman and there's no communication between my camera and the controller. Please see the attached photos to view how I have the camera and PLC configured.
-
I am not a drive person (far from it...), but I am working on a project using a number of ACS800 drives. On one drive (only seeing this issue on one drive, as far as I can determine) - when I specify a target speed and also specify maximum acceleration - there is a (significant) difference in terms of the accel time whether I have the drive set to internal speed control vs. external (encoder) control. It takes almost exactly twice as long to get up to speed when set to external vs. internal. (And problem with keeping it set to internal is that we lose accuracy at higher speeds, and also at very low speeds...). The most obvious issue would be a bad or improperly set encoder module, but speed of motor is correct (as measured by tach) whether using internal or external. Encoder module was also swapped for new one, with no difference. The only parameter that I am changing is speed by external encoder vs. internal (I think that it is parameter 98.01). Would anyone have any idea as to what could be causing this? Thanks for any ideas!
-
Dear All i want to access a register of plc FX2N-16mr through modbus card FX2N-485-bd . can any body help me out. i dont know any idea. any help will be a life savior.
-
Hello all, I have 3 kinetix 5500 drives connected in series but some how the 3rd drive lost power. all the fuses in the cabinet look good. nothing else is tripped either. any advice is appreciated. thank you
-
Hi guys, I always wondering, what is reset when reset button is click? Does the setting from address D from HMI will be lost? Does internal memory of PLC is reset? Anything thats not reset? Or just reset sequence? Thanks.
-
Hi, I'm currently working as an intern, and my job is to transfer the program from a schneider twido twdlmda20rt to a mitsubishi fx5u-32mr/es. The thing is, i've been in trouble trying to understand and "translate" from one plc language to another certain things, like the %MW, %SW and blocks, so if any of You could give me some advisory I'd bee fully thankful (I can't upload all the pics, so theres's the link to the folder) https://inacapmailcl-my.sharepoint.com/personal/nicolas_gonzalez206_inacapmail_cl/_layouts/15/onedrive.aspx?id=%2Fpersonal%2Fnicolas%5Fgonzalez206%5Finacapmail%5Fcl%2FDocuments%2Fscript
-
Hello All, I'm a newbie to Omron programing I have a program where I want to control a stepper motor with 1 plc output "pulse output0" in my program I used PLS2 instruction but when I execute the instruction the motor won't rotate and the plc outputs are off, My wiring is fine, and my plc is CP1E-N40S1DR-A MY 1st output is pulse output 0 Q100.0 and also the driver wiring with the stepper motor is good ( I did a test with siemens plc the motor does work fine ) , what could be the problem? thanks, PLC OUPUT 0 SETTING
-
How can I check output to SERVO motors in ladder logic on GX developer.
Redviper posted a topic in Mitsubishi
Hi everyone, I am new to Mitsubishi PLC. I am trying to see from where Run or speed commands goes to Servo. I have MELSEC FX2M-32MT with FX2N-1PG cards for the Servo and I am using GX Developer 8.91v Also, I would like to mention that initially I found out that BATT V light was lit so here what I didi. >I replaced the battery within 20 second while powered ON. Before changing the battery I took upload of the program successfully. >I have cleared PLC memory and re downloaded the program. > Checked Memory addresses M8005 8006 both are Low. Now, when I am trying to run my machine it is not giving output to two Servos while a conveyor operates when started from the HMI so it means program is inside PLC, right ? Program is attached if someone wants to have a look. labeling mc 300322.rar -
Hello: Does anyone know the details explanation of the Homing Settings for the Axis? Set the homing operation. 0: Proximity reverse turn/home proximity input OFF 1: Proximity reverse turn/home proximity input ON 4: Home proximity input OFF 5: Home proximity input ON 8: Limit input OFF 9: Proximity reverse turn/home input mask distance 11: Limit inputs only 12: Proximity reverse turn/holding time 13: No home proximity input/holding home input Limit Input referring to Input (I/O) ? How about Proximity Input ? It is confusing with the terms. The manual has no explanation for each of the above selection. Any one? Simon
-
I would like to send ascii data to other devices using RS232 interface. and the example format is "0009" (it is product counter machine marking). how can I do this? I am using q03ude, I usually convert 1001 to ascii using BINDA and use the last data (01). but, when it double word data e.g. : 100009 the last data is 9 and null, not 09
-
Hello, since they redesigned the mitsubishi FA website I am unable to find software updates. Is it my fault or did they forget to put them in? Thanks
-
I have this setup: FX3G CPU connected to GT2103 through RS422 (CH1). GT2103's ethernet port connected to LAN and set up as modbus TCP slave (CH2). I want to read/write PLC word devices using a modbus TCP client, from a PC. The HMI is acting as a gateway between PLC and PC. I used the Device Data Transfer function to send PLC's D register values to GT's internal GD registers. D0....D9 ==> GD0....GD9 After some tries, I get valid response from the modbus slave. Reading the holding registers 0....9 (40001....40009), I get only zero values. Those registers can be written back with different values, correctly. I'm sure I didn't understand correctly the modbus address mapping to GT's internal memory. Can anybody help me? Thank you.
-
how to use device net in FX5U SERIES PLC WITH FANUC ROBOT DEVICE NET CARD A20B-8100-0490 /03B
-
Hello! I just recently started learning about PLC's at University. While using Gx Works 2, how do I turn on auto complete for existing variable names? With this I mean, after creating a variable, for example bSystem_Started, if I want to use it again, what setting do I need to change so that by just typing "bSy", a pop up appears saying the whole name "bSystem_Started", so by just pressing enter it auto completes. Thanks in advance, Greetings, Patrick.
