Search the Community

Showing results for tags 'laptop controller'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 39 results

  1. Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale   Condition is Used   This is a Siemens Field PG for PLC Programming.   Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :-   The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics)    Has Step 7 and Step 5 installed   Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much)   In very good overall condition, a few light marks but that's about it, still looks very good.   Comes with the original branded rucksack    This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine   Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately   I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.
  2. Hello Engineers, I  am Will from Levetop semiconductor. Our main product is LCD/TFT graphic controller. Support 8/16-bits MCU parallel interfaces, and SPI, I2C serial interfaces Built-in Ggeometric Drawing Engine: provide Point Drawing, Line Drawing, Curve Drawing, Ellipse, Triangle, Rectangle, Rounded Rectangle Drawing Built-in 2D Graphics Processing Unit: provide Magic Rotation, Reflect, PIP (Picture in Picture), Hybrid Graphics and Transparent Display Built-in 128Mbit Display Memory Support 16/18bits RGB type TFT Panel from 320*240  QVGA to 1280*1024 SXGA Built-in Standard ISO/IEC 8859 Fonts Built-in Two 16-bits PWM Timer Support SPI and I2C Master Interface Three Power Saving Modes: Standby,Suspend and Sleep mode Package: 128pin LQFP We have STM32/ST51C demo code open for developers, function libarary and Arduino Library available, too. Our product P/N as follow: LT7681   640*480   8/16bits/SPI/I2C LT7683+  1024*600    8/16bits/SPI/I2C LT7686   1280*1024  8/16bits/SPI/I2C LT7680A  640*480   SPI/I2C LT7680B  800*600   SPI/I2C LT7680+  1280*1024  SPI/I2C any questions, feel free to contact us
  3. Please could you assist with the software required to download data tables from 4 off DIRIS A10 Multifunction Meters into TM221CE40R Logic Controller via TMC2SL1 Comms Cartridge using Modbus Protocol over RS485. I have downloaded the Modbus tables from Socomec but not sure how to get these into the PLC. I would really appreciate your help in achieving this. I am using EcoStruxure Machine Expert - Basic to program the PLC & DAQ Factory Developer Release for my Touchscreen. Link to Socomec Modbus tables:
  4. Omron_control

    Version 1.0.0


    New app developed - Omron_control for connection Android smartphone and OMRON controllers.
  5. View File Omron_control New app developed - Omron_control for connection Android smartphone and OMRON controllers. Submitter sasha Submitted 08/17/19 Category Utilities
  6. Please help find a controller. We require a controller for 8 nema 23 stepper motors. Must have pulse direction and at least 8 axis or more (16 would be nice). Must have kinematics for linear and circular motion. Must be able to use gcode such as G01 X10 Y10 Z10 A10 B10 C10 U10 V10. Must have axis parameters for all 8 axis eg velocity, rotations, etc. We also need the drivers. Must be reasonably priced under $1000 or so. We found Dynomotion KFLOP which can do 6 axis and we kind of made it work for 8 axis. It is super cheap at around $250 plus KStep drivers so under $1000 total with free software, unfortunately, it can not do kinematics for 8 axis. 
  7. Hi everybody I have a elau c400 controller trying to connect it to a mc-4 pacdrive. But I realized that the wd led on my c400 is on and it can be a fetal error. Anybody has this experience? Regards.
  8. i want to connect omron vision controller fh l550 with Soft PLC (IPC) from Siemens  through Ethernet or  RS232c interfaces, should i use a unit for the communication or can i directly connect the Omron Controller with IPC ?  the IPC is connected with other devices via profibus .
  9. Mitsubishi PID controller design help

    Dear all, I need help in design of PID controller in Mitsubishi PLC fx3u, I what should be parameters for initial, and how to start and stop auto tuning.
  10. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?
  11. Hello everyone, Working in Automation for the first time as a Co-op student so i'm fairly new to PLC's and the Automation field in general. I've recently been tasked with converting a RSlogix 5 program from an old PLC 5 project into a Studio5000 project. I referenced the manual (I'll attach link below), and had no issues using the RSlogix Project Migrator tool that I downloaded off the Rockwell website. My problem is that once I convert the program, my I/O tags that were originally sequenced in octets(0-7, 10-17, 20-27, ...) from the RSlogix 5 program, are switched into a sequential scheme in Studio5000 that just increments them in order (1, 2, 3, 4, ...). I hope this make sense, but basically the first seven tags match between the projects, but then I:010 in rslogix 5 is equivalent to I[8] in 5000, I:011 is I[9], and so on and so forth. Has anyone had this issue before and found a way to have Studio5000 keep the original octet scheme? I don't see this normally being an issue, but the customer has specifically asked that the I/O tag names be kept the same as the original program. Thanks for any help. - Ben   Converting PLC-5 reference manual link:
  12. Pls help set up QD75P4N

    Good day sirs,  i am a newbie at this motion controller setting. I would kindly like to ask for an assistance from all of you. i copied all the necessary data that i have on this project. I installed the wiring correctly i am able to Jog the servo motor. But when i try to Jog the motor Using GXWorks 2 i wasn't able to do so because its not showing any movement on the Mr J4 and the motor it self. is there any settings that i should have change? thank you for the time if you will need any information i am willing to give it thank you   I have also attached the GXworks program and the servo conifiguration   Please help me thank you project 1.gxw Servo 1.mrc2
  13. 1756-L55/A Controller

    Respected Friends, Good day. I face a serious issue please help me to fix the problem.  We have a 1756-L55/A controller with 1756/M13 A memory card. after 2 or 3 months the program washout and the LED status on the controller are following 1. RUN --- SOLID GREEN 2. I/O--- OFF 3. RS232 --- SOILD RED 4. OK --- SOLID RED 5. BAT-- OFF 6. FORCE-- OFF  At that time CONTROL NET MODULES OK Light for Chanel A and Chanel B are also blinking and communication not established via control net and serial port AB-DF1. I switched off the power supply and after 10 second again power up the controller then OK LED becomes solid green.  i download the program and its run fine. But the problem is still there. In the controller properties the major fault shows  TYPE 01 [ POWER UP FAULT] CODE 60 [NON RECOVERABLE FAULT] what are the possible reason for wash out the program from the memory?  At that time version 16.03 firmware installed and the rslogix program convert from version 10 to version 16.03.  Is 1756 L555/A with 1756/M13 A support the version 10 firmware? i ask because the original program is in version 10 if its supported then i update the firm ware and download the original program.   Hope you will help me in this issue. Regards
  14. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.
  15. All, I am using Keyence CV-X422A vision controller for my application. It is interfaced with Siemens S7-1500 PLC on PROFINET. I am able to communicate with Vision controller through PLC logic command and status IOs. There is some communication issue in updating the o/p values from Camera Controller. I have tried with & w/o Handshake Mode with these settings. The camera display shows the reject but camera never turns ON the NG Status o/p. I tried different things told by Keyence Tech support but none of them worked.  He told me to have you enable the “Result ACK Flag” in the bit allocation area and send  a signal to it. Then trigger it again with a no good part and see if that fixes the issue. I tried setting the “Result ACK Flag” to 1 after I get the “Command Complete Flag” for the trigger signal that I sent. Sometimes this works but still it is not reliable. Do I need to send only a pulse to “Result ACK Flag”? Anyone here has ever faced similar issue?  Thanks for your help. AP
  16.   Hello, I want to regulate the temperature by a thermocouple type T with an OMRON control module TC001 / 2/3 and a CJ2M CPU14 series PLC using CX-Programmer as a programming environment. Could you provide me with an example project? Thank you for your help.
  17. Hello, is there a way, to edit E5CC-T temperature controller internal program, using CP1L-EM PLC, connected to temperature controller via rs-485 communication? I can't find any information about doing it. I know that i cat change these programs, using CX-Thermo, but that is not an option. I need to do that, using only PLC..
  18. I'm making this thread, continuing from my previous one (Newbie Screwed Up) where I received tremendous help from those on this forum.    I now have the AB 5/04 working, but the Panel Mate 1700 doesn't seem to communicate with the 504.  The HMI connected to this brick is a Cutler Hammer Panel Mate Pro 1700.  It lights up,  the touch-screen buttons somewhat react to touching (might take a few strokes to react), but the functions do not react with the 5/04.  I called the equipment manufacturer, and they basically said it is all obsolete equipment, no longer supported, etc. and we are SOL. But, for a mere $100K, we can send the unit back, and they'll install all "modern" control units !! Not an option.   I get it that the unit is 10+ years old, but has very low cycle times on it.  (maybe 400 hrs)   It's my understanding that the  HMIs are just that....a means of the operators telling the PLC what you want it to do. So, my question .... is there an off the shelf software package that would emulate the Panel Mate 1700?  All I need to "control"  is to advance or retard two sets of heat seal rollers (via PacSci stepper motors), actuate two separate hole punch solenoids, and an air solenoid for a's basically a packaging machine.  I do have a program called PMConfig , but I don't see any communications buttons or icons in that software, just screen shots of what shows up on the HMI, icon selection, change fonts / colors, etc.  So, I'm looking for a resolution to make new(er) HMI (or even just a cheap a$$ laptop)  with affordable software, and easy interface to communicate with the now functioning 5/04.  Thanks for the input.
  19. Trouble Wiring a Simple LED with a Micro820 Controller

    Hi everyone, Recently, I started working with the Micro820 Controller Embedded I/O. My project is simple : when the output _IO_EM_DO_00 is set to true, an LED light turns on. But, even though it's super simple, I can't make it work. Here's my setup. If you need more information, feel free to ask anything !
  20. controller is not coming online with rslogix 5000, but i can ping the ip from the pc. getting the error message says "controller failed to come online - error 701-8004250B" appreciate ur help.
  21. Hi Here's a question I'm about to ask Omron.. as soon as I can figure out who to ask.. It's complicated asking support.. their web email form doesn't make complex questions easy. Here's the question: Can the NJ CPU program a LinMot linear motor to make the "Random Sea"? The NJ has a mixed protocol.. Ethernet/IP and EtherCAT (CoE),  and claims to be a "Motion Controller".    I doubt Motion Control is available on it's Ethernet/IP line.. but the EtherCAT might be another story.   Certainly The Omron NJ is a Motion Controller for Omron NJ series drives.. However, how well does it work with LinMot? Here's the curve.  Imagine a LinMot Linear motor continuously moving, never really stopping, following a real-time, mathematically generated curve, moving positive then negative, at random frequencies and random amplitudes. Almost never repeating a motion sequence. looks something like this: Yet, after a while the motion history fully represents the spectral distribution of energy on the surface of the ocean. Spectrum analyzers can display it, and mathematics can define it..  I just have to make that sea in a model scale…    (Time scales by the square root of the scale factor) And keep the water in the tank: The big question is: Can the Omron NJ get a LinMot Linear Motor to do this? … LinMot thinks YES.. but, isn’t sure. Yes there are ways to “connect" LinMot to The NJ.. EtherCAT (CoE), Ethernert/IP but… there is nothing in the LinMot drive that can create or store a predesigned Random Sea .. Only a Motion Controller, generating real time motion commands, by running  mathematical equations, "on the fly” can do that.   If the NJ is a true “Motion Controller”, and the LinMot C1250-DS-XC is implemented as an “axis” by Symac Studio, which it is…       Then, there may be hope. Closed loop, PID feedback remains with the LinMot drive, with special settings in LinMot Talk … Homing might have to be done with the NJ .. or by Digital I/O’s What do the Omron experts out there think?  Can this be done? Thanks much, Regards, Michael
  22. Socket communication with Micro820

    Hi everyone ! I have a little project wich involves communication between two Micro820 controllers via TCP/IP. To do that, I started to work with TCP/IP socket. Within CCW (Connected Components Workbench), I tried to create a new socket instance using the instruction SOCKET_CREATE and set the socket address to Basically, my computer through the FTP port. The problem was that it couldn't create a new socket instance (error variable is set to TRUE and status is set to 4, wich I don't know the meaning) because I didn't have a server-side application that listens to TCP/IP socket requests. That said, I found an open source application called SocketTest that listens for TCP/IP socket requests on a specified IP address and port. So, I started a listener on the following address :, but the error variable is still set to TRUE and status is still set to 4. So, my questions are : Is my IP address OK ? Is my port number OK ? What means the status code 4 ? Is SocketTest doing what I think it does ? Do I need to do something else before using the SOCKET_CREATE instruction ? Thank you in advance for your help !
  23. Can't connect to Micro820 controller via CCW

    Hi everybody, Recently, I started working on a project. I want to develop a program for a Micro820 controller (2080-LC20-20AWB) using CCW (Connected Components Workbench). I built a little motor circuit for testing purpose. However, after building the program and downloading it to the controller, I tried to connect to my controller via CCW, but I can't. When I click the button "Connect", CWW crashes OR a window saying : "The controller has unnacepted changes" appears and asks me if I want to "Download current project to the controller" (wich I already did) or "Upload the project in the controller to overwrite current project content" (wich is grayed out). When I choose to "Download current project to the controller", CCW starts downloading the resource, but fails. In the "Output" window, there's a line saying : "Download failed for Device:Micro820: An error occured while reading from GETACTIVERESOURCELIST.". The problem is that there's no documentation at all concerning this error. I even tried to reinstall CCW, but it didn't fix the problem. I joined some images so you guys can see what I'm talking about. Don't mind asking for more details !
  24. TCP_IP_connection

    I. Developed new application   TCP_IP_Connection 1. App TCP_IP_Connection     applies the technology of IoT, Smart Home, Remote control.    It allows to carry out: - remote control and monitoring of control systems; - remote diagnostics of  the object; - turn on/off sensors and devices, including electrical circuits,   hydraulics, pneumatics, etc.; - transfer  information, files and images between smartphones and computers   implemented the application. For communication between the respective devices (smartphones or computers) are required only stable connection to the Internet  !!! The application is developed according to the technology MQTT and use free  Internet broker. As a broker use the HiveMQ broker. The application consists of   3 parts : - TCP_IP_connection.apk - works on the smartphone and is intended for control and      monitoring of equipments; - Server_Send_Receive.exe - the management server located  on the computer and   execution  action on the transfer of  information from the smartphone to the   controller and   back; - Server_controller.exe - located on the  same computer and execution tasks   of  controller. Communication is linked directly with the controller via Ethernet or     Ethernet/IP. As the controller for management purposesused controller family   OMRON (CS1,CJ1,CJ2,CP1H,CP1L...). Note. As a controller you can use the other type of controllers, for example, Yaskawa, Siemens, ABB and  other. They require rework program Server_controller.exe only to  interface of exchange with controller. So for Yaskawa controller family 2300Siec this interface already developed and used in industrial conditions. 2. The application includes the following controls: A. Smartphone – computer - controller. - modes  read/write of memory cells and  bits of the controller OMRON      (DM,W,EM,CIO,HR); - continuous cyclic polling of the memory areas; - the formation of Alarms in the event of errors of control system; - Display Gauges for 6 variables in real time; - Display Scopes for 6 variables in real time; - formation of statistical data on the operation of the equipment. B. Smartphone - computer. - sending  and receiving text  messages; - sending and receiving  picture image; - transfer photos from a smartphone;  - transfer images from built-in Web camera of the laptop; - reading the contents of a directory on the computer or laptop; - reading contents of a text file. С. Smartphone -smartphone / computer - computer. - sending and receiving text messages; - sending and receiving of picture image; - transfer photos from smartphone to smartphone (from computer to computer); - send the image with the built in webcam of a laptop to another laptop; - reading the contents of a directory on the computer or laptop; - reading contents of a text file. 3. Work application Server_Send_Receive.exe and Server_Controller.exe tested on computers running the Windows 7 operating system. Work application TCP_IP_Connection.apk was tested on smartphones Samsung, Phillips  running the operating system Android 5.0, Android 6.0. It requires the use of a smartphone with a display diagonal of 5 inches and more. 4. App TCP_IP_Connection.the apk  paid, the cost per user is $ 5 USA. Distributed through Google Play. The Internet address for downloading of  programs Server_Send_Receive.exe and Server_Controller.exe is on screen Help  application TCP_IP_Connection.apk.  OMRON_Communication has the manual in Russian and  English languages. The Internet address for downloading the full manual Looking for partners for the execution of similar works.      
  25. Version BA KR C4 NA UL V2


    KUKA: KRC4 NA UL Operating Instructions