Search the Community

Showing results for tags 'cj2m cp1w-cif02 no-protocol rs232'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 209 results

  1. Hi,  I have a CP2E PLC (CP2E-N30DRD) with an Analog In/Out board CP1W-MAB221. I can't find a method to setup it correctly (the ERR LED is fixed in ON state). The "W516 (Section10) CP1L-EL_EM ANALOG OPTION Boards" manual says to "set the baud rate of the relative option port at 115200bps in Toolbus mode.", however in CX-Programmer , under "Settings" and "Serial 1" tab there is not such protocol. In w614 (cp2e software manual) and w613 (cp2e hardware manual) I haven't found any other tips. Can you help me please? Thank you.

  2. CJ2M - FC280 Danfoss Ethernet IP

    David_123456 posted a topic in Omron

    Hello!!! Can somebody explain me how to communicate by ethernet IP between a CJ2M and a FC280? Thank you in advance!!!

  3. Reading inputs using FINS/TCP from a PC

    franckcl posted a topic in Omron

    Hello, I'm trying to read data from a PLC using TCP/FINS protocol. I am able to read the data in the memory area from a supervisor PC (using command 01 01) but I do not know how to read the information specific to this machine. Extract from the machine manufacturer's document: Name Data type Address/Value Usage comment Loc_in1 BOOL 1.00 In Local Input 1 Loc_in2 BOOL 1.01 In Local Input 2 Loc_in3 BOOL 1.02 In Local Input 3 UPS BOOL 3.00 Work UPS Input Int1 BOOL 3.01 Work Interlock 1 Int2 BOOL 3.02 Work Interlock 2 T1_LSB CHANNEL D20 Work UPS Hold time LSB T1_MSB CHANNEL D21 Work UPS Hold time MSB REM_1 BOOL H0.00 Work Remote input 1 REM_2 BOOL H0.01 Work Remote input 2 REM_3 BOOL H0.02 Work Remote input 3   This is the document I've written to understand the protocol: 1st frame to send: 46,49,4E,53 : ‘FINS’ 00,00,00,1A : Length(8 de l’entête + 18 de la chaine qui suit) 00,00,00,02 : Cmd (2) 00,00,00,00 : Error code (0)   Second frame to send 80,00,02,00 : ICF + RSV + GCT + DNA 0F : DA1-FINS node address of Ethernet unit (Server node=15) 00 : DA2-Destination machine address (0=PLC Main unit-CPU) 00 : SNA-Source FINS network address (0) FB : SA1-FINS node address on the PC side (Client node=251) 00 : SA2-Source FINS network address 01 : SID-any data from the source process identifier 01,01 : MRC,SRC-FINS command code 0101: Read memory areas 82 : Memeory area=Variable type: DM (Dxxxxx) 00,14,00 : Read start address (20) 00,01 : count (1) This shoud send the UPS hold time but everything is at  zero. Who could help me ? What is wrong ? Thanks  
  4. Hello, everyone I have to query a SICK distance sensor from an L26CPU via the onboard Ethernet interface. I have created a simple protocol which I start with the function block SP_ECPRTCL. Unfortunately it takes at least 25ms until the next telegram is started. The sensor responds within approx. 1.5ms. Does anyone know whether that works faster or is that a limitation when using the predefined protocols? Sensor manual:  OD5000, 8021391 (sick.com)  (Chapter 7.4) I am grateful for all the hints. Thanks and regards Dave SICK_Protocol.tpc Messaufbau_vTest.gxw
  5. I have successfully downloaded the HMI program into NB7W-TW00B, but there is no display on the HMI because the communication indicator which is connected by the RS232 cable doesn't light up.  I have verified the wiring and pinout of the RS232 communication cable. What else can be done to troubleshoot this issue?
  6. I am working on project where I need to program delta PLC to receive ASCII code from scanner. I anyone know how to program it helpls me alot.
  7. Hi there, I am fairly new to programming serial communications, especially with Mitsubishi PLCs. Can someone walk me through in ladder logic how to bring in ASCII to the PLC, store the data in the data registers. Then send the data out to another PC once an 'X' input is satisfied? ASCII code would go like the following: C2,0,1,123,2,ABC,3,456,CR

  8. OMRON CQM1-CIF02

    Attila posted a topic in Omron

    Hi! Does someone has a pinout and/or wiring diagram for an old  CQM1-CIF02 cable? Thanks!

  9. OMRON CQM1H-CPU21 Serial Connection

    SillyBoy posted a topic in Omron

    Hello Sir / Ma'am,   How to connect Omron CQM1H-CPU21 (Image Attached) to the software for Configuration. I have tried it many times but I think I am missing something from the wiring side. Above mentioned Controller has a built-in Peripheral Port and an RS232 Port, We don't have that particular cable that connects the Controller to the Software via Peripheral Port. Kindly help me to connect the controller using the RS232 Convertor.   I am using ATC-810 RS232 to USB converter. (Image with all Pin Details attached) Software - Syswin or cx-programmer. (Upload failed, please use the below link of wetransfer.com to see images) https://we.tl/t-XmuqtUCYOk  

  10. Can a CJ2M communicate to a C200H??

    TigerLily posted a topic in CX-One

    Hello! I just got an interesting request from a customer, we have a product line that uses C200H PLCs.  The cabinets can operate independently or they can be connected to work in a Master/Slave configuration, the C200 PLCs communicate to each other over RS-232 using LR registers. Back in 2015 we redesigned to use CJ2M PLCs and changed the communication to EthernetIP. Now we have a customer who wants to buy a new slave for an old C200H system, so my question is what are my options for communicating to a C200 with a CJ PLC, I don't have much experience with the C200, that was programmed before my time here, in 2000 I think. Thank you!!!      
  11. I have an SLC 5/03 that Im trying to get the program from. I have a 1747-uic. Im not getting anything to show up in rslinx and I suspect the channel 0 is configured for ASCII because theres an HMI plugged into it. Also the rj45 connection is broken because someone used a crossover ethernet cable...lol. is my best bet to try and fix/replace the 1747-uic? I have an offline copy of a program from a different machine that uses a 'similar' setup and the CH.0 -System is configured for DF1 full duplex,19200,CRC and CH.0 - user is ASCII 19200 baud. Any Ideas? I was using the 3 wire db9 connector running from the HMI to the PLC. I unplugged it from the HMI and used it with the 1747, Should I use a standard DB9 cable with a null modem adapter?
  12. Hello. Is it possible to hard reset (power cycle) the CP1L-E cpu unit using software? I'm having difficulties, because when you configure IO MAD42 card via CIO registers, you have to power cycle the PLC. The problem is, that I remotely configure the PLC. If I put PLC to program then to run mode, the configuration fails to update. Is there some kind of BIT to do "virtual" power cycle? Thanks.

  13. modbus rs232 communication error

    gaith_sharabati posted a topic in Mitsubishi

    hi I am traying to connect 10 plc's FX3U to a scada system, on the plc's there are a rs232db and FX3U-232ADP-MB cards. i have devices transmit the rs232 by lan or any thing I need (rut955) my problem is when i download the program on plc same times the communication go right , but if i powering pls off then on the communication fail down. I initialized the plc  like photo https://drive.google.com/file/d/1Tr367wfVCRG6vvKcsOFyTKG_FExAsnVy/view can any one help me? sorry for my English
  14. Hello All,   Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q.  Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site.   Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network?   Thank you.
  15. Hello All,    I have had no luck sorting through Pilz datasheets on this CPU to find cable / software to connect/upload the program. Any insight?   We are upgrading this to the CPU 4000 series - it will use DeviceNet. Will this node number / memory allocation be setup within the 'PSS 4000 Firmware' software? Where do I find a guide for this?   Thank you.
  16. Hi, I am doing a project to extract analog data from Kashiyama pump through RS422 port. I am using QJ71C24N to establish the connection. But it encounter error code 7D00. Can someone help to take a look what go wrong?

  17. Modbus with CJ1W SCU31-V1

    locleabc98 posted a topic in CX-One

    Hi every one, I want communication Inverter mitsubishi D700 with module CJ1W SCU31-V1,  any one give me a correct solution and send any sample program. Thanks
  18. Good day everyone!   I have some question relate with above subject. While i try make protocol for the CJ2M PLC.  i found out "Primary Expression (yN+x)" function but i cannt understand what`s this for. even i tried to find in the reference manual. i can not.  you can find it "Message Editor" -> "Message Variable" -> "Variable" sorry i tried to upload picture many times but it kept showing failed to upload.    hope so i could find the answer. thank you!

  19. CJ2m Time as millis()

    AndrejP posted a topic in CX-Programmer

    Hello. I'm using CX-Programer and CJ2M CPU. Is it possible to get current time in ms like in arduinos millis()? Thanks. BR.
  20. Has anyone interfaced an SR1000 (or similar keyence barcode reader) with a (Automation Direct) Click PLC?  I am looking to read/write rs232 so I can get the string back from the barcode reader, instead of actually teaching it or using banking (banking is a bit cumbersome with the keyence, plus it'd take me a long time to actually get the labels I need to teach the camera all).  I had started messing around with the application, but I have no way of seeing if the camera or plc is actually reading/writing the data.    Data is all ascii.   Thanks,
  21. Hey all, Further to my other post I need to read an analog input flowmeter signal (4-20mA) and scale it to litres per minute flow-rate. Then display on HMI...... Then use a PID control block to control a output water control valve (4-20mA) to a calculated set point (litres per minute) The flowmeter is measuring water flow in a pipe & The control valve is controlling the flow rate in the pipe. The water is then sprayed onto a conveyor belt - measured at a percentage SP depending on the amount of powder product on the conveyor belt (in KG) 1. So inputs to PID is the SP (litres per sec) calculated every few seconds from product weights (kg) in bins. 2. And the PV is the flowmeter reading. 3. Output is the control valve (4-20mA)  Does anyone have any tips to do this or some good flow PID and flowmeter example. Your help would be much appreciated. Thanks Richard                           
  22. Hey, I have a project which one part involves using a RTD PT100 (0-100 Deg.C 4-20mA) connected to a CJ1W AD041 (ATD input card), the PLC is a CJ2M Basically the PLC needs to read the RTD and display the temperature on a Omron HMI (NS10), via Ethernet, Could someone please help me out with a basic example program - to read and convert the RTD - ATD value to store in memory. Your help would be most appreciated. Thanks  Richard       

  23. CPU to Advaced HMI slow response

    T J SHARON posted a topic in CX-Programmer

    HI all,  I have connected my CJ2M-CPU13 to Advanced HMI software via Hostlink (19200,7,2,E ) .  I connected to the serial port in CPU and just used ( didnt write any code or formating).   The HMI response is very slow ( almost 2+seconds).  I am not sure whats is wrong, Is it because i am using more words?  Anybody had this encountered this problem? Appreciate all suggestions and advices.    
  24. Greetings everyone. I'm new here. Hoping to get help to operate the Omron V400-R2 barcode to the Mitsubishi QJ71C24N so that they can communicate the two devices with the correct method. PLC: Mitsubishi: Q03UDVCPU; barcode: Omron V400-R2; serial communication module: QJ71C24N. I use RS 232 communication cable, I have tried using predefined protocol and non protocol procedures but still can't communicate the two devices. I really appreciate your help.
  25. I need a Red Lion HMI to communicate with an IO module (8) IO's ... I don't really need a PLC.  Because the control of a certain LinMot drive for a linear motor can be activated by IO's.  This LinMot drive can store up to 100 curves... which can simply be called into operation by a single binary number between 0 & 255,  defined by eight IO's ..  you input the number on the HMI, the HMI converts to binary and set the (8) IO's in the module which sends the binary number to the LinMot drive..   Yes, there are some other IO's for starting and stopping ... and it may be unrealistic for me to not use a PLC.   I'm trying to get the cost way down...    If a "stand-alone" IO module does not exist... then is there a simple, low budget PLC out there, with 8 or 16 IO's available..?    Thanks much, Michael