Search the Community
Showing results for tags ' subnet and gateway. any remedies/advice is most welcome. please provide a guide on the communication/configuration setup. thanks'.
Found 242 results
-
Connecting to Sinamics G120 by Starter/Scout via CPU S300 gateway
Clear.Mind posted a topic in Siemens
Hello. I have CPU S319-3 PN/DP which connected with Sinamics G120 by profibus. I have connect with cpu by ethernet. I made setting as explained in help, but it doesn't work. I use Simotion Scout 4.4.0.2, Version of sinamics drive 4.6. Scout can found CPU in accsessble nodes cpu ip is 192.168.3.6. I also trying change slot 0,1,2, but it bring zero result. What additional setting need to do? Setting HW Setting connection to Sinamics Sinamics Version Accsessble nodes -
FactoryTalk View Alarm Setup Messages Deleting Itself
haylow_89 posted a topic in Allen Bradley / Rockwell Automation
I have entered the messages many times into the Alarm Setup but every time i re-open the alarm setup, every message that has the Trigger Value=1 will be deleted. Anyone have a similar issue? -
Hello, i have DOP-07s411 delta hmi and i want to interface it with microcontroller using modbus (RTU) protocol over RS485( 8 bit data,1 stop bit, parity none,19200 baud rate). i have good speed of communication if i do not use macros. But as i place background macro(background macro is only 4 lines ) it slow down and updates the display at every 3 seconds. i cant able to figure out what is the problem. I want to update display of HMI very fast.Please help me to troubleshoot the problem.
-
Hi, I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
-
Dear all, I have Mitsubishi FX1S Series PLC while i am downloading program , i am not able to do it and i am getting error. please find attached image and please help me to solve it.
-
Hello every one. can any one explane me maximum how many CC link card we can configure in one QJ61BT11N module. and whwt is difference between CC link and Input/Output card
-
Hello, I am a newbie to the Omron world. We have a new machine come in made on Omron PLC, we are trying to get it connected to our OPC server so that the server can read and write tags via ther Ethernet/IP protocol. We have given out ethernet card 10.14.9.187 IP and the NJ501-1300 controller is on 192.168.250.1. But still our OPC server cannot see the tags/variables. I dunno if we have to add the ethernet communication card to the network configurator and add the tag sets ? We are also getting a tag resolution error on sysmac studio while being online. Thanks Pratik
-
Hello, I am looking for examples on using serial communication with a WMS inside Studio 5000. Sample programs would be ideal. And I would like to get some information on what blocks need to be used. e.g. Send, and Receive Thanks!
-
Hello guys, I am using Fatek PLC's to communicate with each other as a Master & Slave through zigbee which is connected through RS485. And I succeed. But the issue is that I have to communicate each other at a distance of about 2km where zigbee out of range to each other. I am bit confused here; 1) whether I use RF booster? Does it work? 2) Should I introduce extra PLC as a repeater between master slave? But this(extra added) PLC repeater also become as a master(Master Repeater).or any idea? Most important I can using Fatek Protocol or Modbus RTU or Modbus ASCII prootcol.
-
Hi, Is there any way in order to monitor both PLC(GXworks2) and HMI(WinCCFlex) using only 1 port from the PLC(FX3U)? I have tried it but I'm not able to communicate the other application(one at a time only). Thanks!
-
Communication between Micrologix 1100 and Panelview 600 Plus
JCG79 posted a topic in Allen Bradley / Rockwell Automation
Hello, I am currently installing a PLC control panel and due to space constraints, we will need to install the Panelview 600 HMI separate from the Micrologix. We purchased a 50ft Allen Bradley communication cable, but 50ft will not be long enough. We have about 70 to 75ft of conduit between the panel and the HMI. I would like to know what options we have for this connection. I read that for serial connection, we shouldn't go past 50ft. I understand the Micrologix 1100 has an ethernet connection and the Panelview does as well, but I'm not sure what changes would be needed in order to communicate through the ethernet port, instead of the RS-232 port. Any suggestions will be greatly appreciated. Thanks, JCG -
The topic is based on "How to configure a PCM module in GE PLC". One new query in PCM. To configure this PCM Module some procedure is to be followed in CMD prompt. Initially once ''READY'' line displayed. Query to this topic is if ''READY'' line repeats below persistently in CMD prompt, then solution is ______????
-
Comunicacion RSLINX gateway in remote server and Visual basic
arturo_papito posted a topic in Allen Bradley / Rockwell Automation
My intention is create a visual basic program with access (or excel), if possible with a Cold link (so I wake up when I need data only). See if you can orientate me about the best way and solve my doubts. I am pretty new to all this. I have several Allan-bradley plc’s in the Ethernet network. Several PC’s with windows 8 and excel/acces in the latests versions I have a server in the net where I have installed RSLINX gateway version. I have created a topic and I can see the PLC variables in there OK. In rslinx commnications -> I have set the click “enable rslinx classic gateway” I have run the OPC test client and it works OK according to some test Ihave found in google 8so OPC/DDE server is active etc) I want to retrieve Data in My PC from the rslinx that is in that server called BCNA08. I have colleagues that know how to run the EDIT ->copyDDE/OPC link and create a HOT LINK in excel in the same computer for other versions of rslinx (lite I believe) that they had for tests purposes. So I try the same but of course it does not work for a PC that is nor running RSlinx. My Rslinx is in BCNA08. How can I set a hot link (excel continuos update) and cold link (visual basic open/close communication). Any help or suggestions will be welcomed. Any good link to learn more too. -
Hi again I browse through half a dozen mitsubishi manuals but turn up nothing for mitsubishi plc cross-communication. In this project there are about six L-06 plc:s. All are on the same ethernet network already, communicating nicely with the SCADA system. Per today information is (temporarily) exchanged via the SCADA system. Here is another hole in my knowledge. Namely how to correctly setup communication between these plc:s. I plan to continuosly exchange some 50 bytes of information. I would be grateful for some pointers and/or perhaps a reference to a manual. Cheers to all of you //
-
Dear sir, My problem is I connected with PLC with cable and uploaded the program and it's working nice, but when I removed my cable and connected the monitor panel it have communication error, I connect my PC again it won't see the PLC, the PLC functions I/O is work but I can't connect with PC or monitor panel. So if their any reset for communication port or the port is damage?
-
AB PanelView 600 Serial communication with ML1500 in FTView ME
kumbharamols83 posted a topic in Allen Bradley / Rockwell Automation
Hi All. I have AB PLC Micrologix 1500 and HMI PV600. In factoryTalkView ME I have installed RSLinx Enterprise and I have setup communication setting I have created one shortcut like PLC1 linked it to PLC ML1500 which I can see in right side of setting pan. I copied these settings to Runtime target. Now while giving animation in screen e.g. colour, I am trying to browse tag but it's not showing anything in online folder. I clicked show all server, refreshed all folders and restarted RSLinks Enterprise service also but still can not find tags. I ran runtime on PC using OPC created in RSLinx Classic, Its working fine, I can browse tags. But it's not working while I download it in HMI as I can see in HMI configuration network and comm setting there is only RSLinx Enterprise is available. Please suggest me solution on this issue. -
We are communicating FX3GE PLC with Vijeo Citect SCADA. We tried various protocols such as MelsecNET, MelsecFX2N, Melsec1, etc. If you know how please help.
-
Hi. I'm hoping someone can give me an answer on this problem I'm having with a FX3GE PLC. I am trying to get a FX3GE plc to communicate to a drive over RS485 using a FX3G-485-BD card. In GXworks2. But am having no luck. I have tried changing the PLC communication settings in PLC parameters between CH1 and CH2, But am unable to get any communication working on the front port. I have also tested with a FX3G-232-BD RS232 card and have the same problems. There is no activity on the SD RD led's and no data being sent. If I put the FX3G-485-BD card in a FX3G or FX3S PLC I have running the same code it works fine. So the problem I'm having is with the FX3GE PLC Please can someone tell me what the difference is with the front Communication port on the FX3G and the FX3GE. And how I can get the FX3G-485-BD card working on the FX3GE PLC. Thanks
-
Hello, I am working in microprocessor industries, now I am doing reverse engineering for PPC SECS communication program in Visual C++ 6.0 for Mitsubishi PLC(Model Q50UDEHCPU). Did anyone from you have worked with this program PPC? I need to find out the what are doing each function from this program? Like hostproc, data, mainproc, otherproc, plcproc, qbproc queue, offline, send_c, QBFFunc32.
-
Hi ALL, Am trying to configure a PCM 301 (LM 90 30 Communication Co Processor Module) What software do I use,is it TERMF or PCOP? And where can I buy this software Thanks
-
Hi, I can't add this CP1W AD041 analog module to mi PLC CP1H
-
How do I read a Mitsubishi PLC program through a QJ71E71 Ethernet card mounted on the same rack?
-
I am having trouble loading the configuration into a Micro984-230. I lost an old M84-002 PLC. I have the program. I purchased a Micro994-230 replacement. I lost my cable, so I made a new one. The only software that I have still running is Updoc 4.30b. I tested out my cable and Updoc by connecting to a 984-381. Everything worked fine online and offline. The error I get during the configuration loading is communication error 13. I have no idea what that is. Perhaps I can't do configuration loading with Updoc. I have Modsoft Lite working but I do not think that it works with this controller. It is for MIcro and Compact controllers. I may have modsoft and taylor kicking around but I do not know if they are installable or not. I hope I can find out if my config is improper, I have used the wrong controller setup file (used Micro984), or where iI can have the config loaded for me? I also do not know if this used controller is functioning correctly.
-
How to communicate Machine Edition ( in Remote PC, 150 meters) to GE Fanuc 90-70 PLCs 15-pin programming port over ethernet ? Any converter for RS-485 to Ethernet ?
