Search the Community

Showing results for tags ' etc. all the mb public%2Fnative function codes are supported. 32-bit integers%2Ffloats as single entity are supported with byte and word level swapping. a separate utility automates the data mapping to your plc logic. features -serial master %28basic requ'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 325 results

  1. Hello, I have been so many days trying to comunicate the multiway software trought a serial usb converter with the SCU31 device, using a omron function block to read a holding register, but I can't achieved it. Now Im receiving some frames on multiway, but there is always some errors. I was wondering if somebody in here that have worked previously with modbus and omron can be able to help me in how to configure everything corectly to be able to read the value from multiway, on the plc, and where is this value saved.  I'll upload some captures to show what I have done till now.    
  2. Does anyone have any tips or tricks for generating UDT Templates from an excel spreadsheet? It says in the help files you can copy/paste from excel into the UDT Template, but it seems to only allow that cell by cell, instead of the whole table of data. This is painfully tedious when building larger interfaces. I've tried saving the spreadsheet in various formats (CSV, PRN, tab delimted txt) and I've tried various versions of RSLogix from 23 to 31. I can't seem to find any detailed info on how to do this. I've seen some other forum posts regarding using scripting to generate the XML to import the UDT, but I don't understand why I can't simply copy and paste the info in. Is this really that difficult? Any help would be greatly appreciated. Thanks Otto

  3. NS15 - Data Log Graph Decimals

    AndrejP posted a topic in CX-Designer

    Hello.I'm having variable Voltage expressed as UNSIGNED DOUBLE INT.For example: Val = 23423For displaying the right value I have to divide value by 100 ... Val/100 = 234.23V.For showing the value I can set the decimal place to 2 and Unit&Scale to 1002.The problem is:THE GRAPH IS SHOWING Val=23423. I WOULD LIKE TO SHOW Val=234.23.HOW CAN I USE THE DECIMAL PLACES IN GRAPH?WHERE CAN I SET THIS SETTING?Thanks.BR, Andrej.

  4. Control Panel

    cjcygan posted a topic in CX-Programmer

    Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software?  I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously.  Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
  5. Hello At first - sorry for my bad english. I have a FX2N-48MR with a FX2N-232IF and i only want to watch the X and set the Y over RS232 with a Crestron Contolunit. I use GX Developer 8 on a XP Laptop and figure slowly out how it works. I read the manuals i found, managed to send from the PLC to the Serial Program on my Laptop (Program named HTerm) But i do not figured out the sending. Can you give me some hint?   Greetings FT

  6. CJ1M serial communication

    raber posted a topic in CX-Programmer

    Hi! I would like to know how I could send information throw serial RS232 communication. I mean, I have CJ1M-CPU11 connected with ID232 and OC201 modules, and I have an optic sensor (digital input). When the sensor turn on, I would like to be able to read the information (on/off) with an application like Putty (I have the PLC connected by RS232) to develop an application and show the information on another framework. I don't know if I have explained very well. Thank you!

  7. Read/Write data to PLC

    CarloM posted a topic in Mitsubishi

    Goodmorning a question... I builded a simple monitor of plc. I need to read the data of the Mitsubishi FX3GE PLC. In example I should read: D14  FLOAT 32bit D16  FLOAT 32bit alarms from M100 to M119 and a bit of state M450 How can I do this? The PLC is connected via ethernet and the port il 5002.  I'm working with PHP and normally use modbus, opc-ua, etc. But here? Thanks in advance Carlo
  8. HI ,  Thanks a lot for the reply & help on previous topic. Now i setting up a new system with 2x CJ2M CPU13  and 2x SCU32 and the connection via 1000M RS485 cable. May i know the best communication to use for the serial communications?   Regards, TJ SHARON.

  9. FX3U Stop Reading Channel Data

    Sohail Riaz posted a topic in Mitsubishi

    Hello Everyone,  Need help with reading channel data of FX2N-4AD with FX3U Cpu. I have added all the logic and it works also. Problem is that, FROM function stop reading/fetching data from FX2N-4AD after some time i.e couple of hours and value just hang. Like 502 or something, untill you reset the whole PLC. What could be the problem. For the further info, -I have connected the FX2N-4AD on the right of fX3U-64M. -There are two extension blocks FX2N-16EX and FX2N-16EYR also added to the right of FX3U-64M -Order of mounting....FX3U-64M > FX2N-16EX > FX2N-16EYR > FX2N-4AD > FX2N-4AD   I have tried using the 2nd special module connected at the end, but It showed similar problem after few hours of running. THis shows that both Special blocks fx2n-4ad are okay. There is something wrong with PLC maybe? Please help

  10. Q03UDVCPU

    Raalen posted a topic in Mitsubishi

    I am new with PLC's and I am learning how to work with GX Works 2. I have two questions, 1st Question: Using a Q series PLC (Q03UDVCPU) Is it possible to convert the language of a project from ladder logic to structured text? 2nd Question: If I read a project from a PLC why is it always ladder logic? Is there any way to read out structured text?
  11. Hi I'm looking for Ladder Logic code that I could use for a plastic injection molding machine.  I am willing to purchase and/or modify existing code to meet our specifications.  We have lost the Ladder Logic out of the TI/Siemens Controller on our Newbury 100 Plastic Machine so we're looking at replacing both the PLC and the HMI interface with an Automation Direct Controller.  We have the HMI Basic Code for the Newbury but not the ladder.  I've pasted the manual below for our machine.  Any assistance would be much appreicated.  The manual was too large for me to post but I've posted a document with information about how we intend to upgrade which has a little information about the machine also. Newbury 100 upgrade logging.docx
  12. Hi everyone, Using Cicode programming ... I'm try to make a function empressed Button's input command that still running forever until the user press the Button again .. so if i press the Button at first the function inside Button will be running , But i wonder to terminate that function by press same button second time or don't mind if you suppose other Button for stop running the function ... plz help to make a code or something else to stop running of my function.
  13. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf

  14. OMRON PLC

    karthiknd7 posted a topic in Omron

    Is it possible converting Omron and Keyence plc's serial communication into Ethernet using serial to RJ45 converter?I need to connect these plcs with MOXA 5600 terminal service for communicating it to the Server.Thanks in Advance....!

  15. Pointer Device memory

    jbondie posted a topic in Mitsubishi

    To those who don't know the GX Works2 compiler treats any function block referenced used in your code as a place to copy the entire set of code data into your program. Function block calls are not handled like pointers even though the should be. [You'll consume all your pointer space by thinking function blocks are great.]

  16. 90 30 CPU350 serial connection

    Htguru posted a topic in GE

    ok running into a issue here, so we were able to communicate with the processor to download a program. transfer went fine. upon cycling power, we can no longer connect to processor. we used LM90 for the software. i've tried removing the battery and shorting out the "mem clear" points on the board, however we can no longer communicate with the CPU. we have a POWER and OK light solid on the power supply. kinda stumped here if anyone has any insight.
  17. Hello people, I hope someone can help me with this. The system is connected with 8 PLC's. I want to transfer the data memory of a PLC to another like this: D850 from PLC2 to D900 PLC1 D850 from PLC3 to D901 PLC1 D850 from PLC4 to D902 PLC1 D850 from PLC5 to D903 PLC1 D850 from PLC6 to D904 PLC1 D850 from PLC7 to D905 PLC1 D850 from PLC8 to D906 PLC1 The data memory is an integer.
  18. Hey, I recently started trying my hand at creating function blocks. At the moment I'm trying to create a PID function block, however I keep getting this error: "ERROR: Variable does not have enough size." No idea why it does this. Can anyone help?  
  19. Hello, Completely new to Mitsubishi PLCs and I need to use a date and time stamp for data collection purposes. We have a Siemens PLC as well and this has the data type "Date_And_Time" which is what I need to replicate. I have been attempting to write my own data type but am struggling with how to go about this as it is not straightforward and I cannot find anything about how the Siemens Date_And_Time is made up so I have nothing to go off. Does anyone have an example of a data type they have made that is the same? Or is there a data type which does this already in GX Works 2 that I just can't seem to find?  Please help!
  20. Hi Everyone, I would like to know  if two S7-300 CPU can exchange data via MPI protocol using X_Put and X_Get blocks. is it possible to test the data exchange via PLCSIM to verify. CPU1 = 313C-2DP CPU2 = 312 Please advise. Thank you.
  21. Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance!
  22. Hello! I have a project where I need to use Allen Bradley PLC, it might be one of CompactLogic series. In scope of the project I need to transfer few real values to DirectLogic PLC that installed on customer side. DirectLogic PLC has installed ethernet card that support Modbus TCP, TCP/IP and UDP/IP protocols as it says on automationdirect website. I start looking for Allen Bradley PLC that support Modbus TCP or TCP/UDP protocol and did find clear information. Could you help me to find out a way how I can pass the data to directlogic PLC from CompactLogic?   Thank you in advance!   Regards, Scotty
  23. Is it possible to use FX3U-485ADP-MB as a serial port to send and receive user defined string/data to and from a computer? I have a FX3U-32M PLC and two FX3U-485ADP-MB adapters. I have been using PLC with one adapter as Modbus Master. Now i want to use both adapters, where one will be Modbus Master as usual and the other I want to use to send and receive data to and from computer terminal (Example - Realterm). I have a third party 232/485 converter which works really well. Lets me just describe my requirement straight forward. I want to display process parameters on a windows computer based user interface (UI) and also set some variables in PLC from the same UI. The UI has access to serial ports of computer.

  24. Internal function block variables

    Geo1000 posted a topic in CX-One

    I have a function block where the first internal variable is showing as address H1420 in the Global Symbol table. When I add another retained variable to the function block then save and compile the code, the variable address in the global symbol table shifts from H1420 to H1488.  I need to retain the address as I will be downloading code and I need to ensure the address if H1420 stays with that variable.    Can anyone help with this?
  25. Hello Everyone, We made a video about the simple explanation of the settings of the abb acq580 driver in the stage of water level control in multi-motor dirty and clean water cycle systems using the automatic commissioning feature of the ABB ACQ580 driver. Your comments and feedbacks are very important for us.  Video: Youtube            https://www.youtube.com/watch?v=JANGnykYYyw (For those who can't see the link) The video in our language(Turkish) but we put english subtitles. If you got any question, feel free to ask.  Thank you.