Search the Community

Showing results for tags 'upload program from hmigxu35000'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 96 results

  1. A machine was bought at auction which included PLC-5/15 module.  It did not come with a backup of the program.  Our maintenance technician said the program would not load and turned the module over to me (IT).  I notice the battery was installed in '92 so am assuming the program is lost.  Is their any internal memory or last ditch effort i can attempt to recover the program from this module?
  2. Hi Guys! You can read my problem below, if anybody can help, please do it. Thank you. So, I have 4 knife. You can set the cutting width for each knife separately. The problem is, there is a lot of size. There is an example: No1 size:  #1: 20 mm, #2: 25mm, #3: 30mm, #4: 25mm   (#1=Knife1.......)                                       No2 size: #1: 22mm, #2:24mm, #3: 32mm, #4: 27mm What is make the problem more difficult is There are plenty of type code too. Like X1, X2, X3, Y1, Y2, Y3 ..... This is the main material code. and you can choose the belogging size. So you can select for X1 to No1 or No2 ... but you can select for X2 to No1 or No2 or any sizegroup you want. I can solve it with a lot programming, like deal every possible situation ... but there is a lot time .... :S  There is a touch panel where you can set the values.  Anybody have another idea for this problem ?    
  3. We have a QSeries PLC. Q25HCPU. We also have a PLC program. We found that the address registers (also known as device addresses) attain a z-value added next to it - automatically over time. We are not sure why this is the case. Nonetheless, when these values get added (by the PLC - not the engineering software), some of the functions in the PLC doesn't work. We found that by formatting the CPU, and reloading the program, allows for the system to work again (temporarily) for a few weeks, up until this problem occurs again. This problem occurs across various CPUs (eliminating the potential for hardware problems. These z values can be seen when a program comparison is done. (see attached file). The questions become; 1. What is the function of these values? (why does the PLC add them? 2. How can they be permanently removed?
  4. We have a QSeries PLC. Q25HCPU. We also have a PLC program. We found that the address registers (also known as device addresses) attain a z-value added next to it - automatically over time. We are not sure why this is the case. Nonetheless, when these values get added (by the PLC - not the engineering software), some of the functions in the PLC doesn't work. We found that by formatting the CPU, and reloading the program, allows for the system to work again (temporarily) for a few weeks, up until this problem occurs again. This problem occurs across various CPUs (eliminating the potential for hardware problems. These z values can be seen when a program comparison is done. (see attached file). The questions become; 1. What is the function of these values? (why does the PLC add them? 2. How can they be permanently removed?
  5. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.

  6. Upload an application

    Consme posted a topic in GE

    I want to upload an application from a QuickPanel  What software, decive or cable do i need? 
  7. when i try to upload a code to m340 it give me this message  "This isn't a valid PLC Address, or PLC is busy , or media is off." whatever i use usb or tcp/ip port, it don't always give me the message but most of the time it does and i have to unplug and replug the cable many time until it upload the code, i am sure it's not a cable problem what can it be?
  8. Looking for Socket TCP/IP communications program examples for Mitsubishi PLC iQ-R R04CPU using GX Works3, to compliment the Mitsubishi Ethernet manual Socket commands instructions. Unfortunately, the manual is missing real application ladder logic illustration examples of these commands. For example, the Socket Open Connection command, does not describe in what order or format to enter the IP Address.   For example, to enter IP Address 192.168.1.100, does the most significant octet 192 is entered or stored first in the lowest memory storage register (Big Endian format) or does the least significant octet 100 is entered or stored first in the lowest memory storage register (Little Endian format)? I am trying to write a simple Socket TCP/IP communications command that will write about four registers from an existing Mitsubishi PLC R04CPU (Socket Client) to an Allen Bradley PLC ControlLogix (Socket Server). .
  9. Hello everybody, I have network from : PC - 192.168.3.11 PLC - 192.168.3.250 I change this option in FX5U PLC in GX Works3 for Network Ethernet port --> Application Setting -> Security -Disable Direct connect with MELSOFT : Enable/disable -DO not respond CPU module search : Respond / not respond and I upload program to PLC. After upload program to PLC and restart it was impossible to connect again. I Have ping between PLC and PC, but could't write program. Always writes me Error <ES:0180840b> So to disable Security Option you should to do : 1. Open Works3 2. New Project (Choose your PLC - FX5U) 3. Online menu 4. Specify Destination Communication 5. Click twice in PLC module 6. Set Connect via hub (In my case i connect PC and PLC directly !) 7. Choose IP Address ( in my project : 192.168.3.250 , PC must be in same network 192.168.3.X) 8. Give OK 9. Connect Test. With steps I disable security options and it was enable to connect to PLC and Write data on it. I Hope that will help to other with same problem. Special thanks to : Piotr Tynor(Mitsubishi, Poland ) , Adam Syrek (Mitsubish, Poland ) , I. Ayvazova (Bulgaria) , K. Raykov (Bulgaria)
  10. I'm using Controllogix L61 redundancy system as a slave with DCS using ethernet tcp/ip socket programming. The communication between master and slave will fail after a switchover. Kindly give solution for this. Thanks and regards, Rasu

  11. FX-64MR

    shehoxs posted a topic in Mitsubishi

    Never Succes Upload from PLC to MEDOC v2.4, always brake on step 1302,always have massage invalid intruction found. Upload from PLC to PC ..never done,succes full.Please help me,,what happen?.

  12. CX-Thermo program

    viliux112 posted a topic in Other Omron Software

    Hello, I am working with e5cc-t programs, for heating application. I need to find a way, to start program, when temperature reaches set-point of first (no. 0) segment. I think that, there should be some kind of setting, but i cant found it.. I've done this with PLC, but this is not an solution for this application. in conclusion: After program starts, it has to reach set point temp, and then hold temperature for certain time.  

  13. Version 2.0.2

    812 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  14. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  15. it possible to get the program backup form plc fx2n 48mr and roster it in 3u-48mr
  16. So my company recently purchased a new Allen Bradley PLC Demo kit from Amatrol (CompactLogix L16ER) and I installed the Studio 5000 v24 onto our company computer and started going through the Amatrol Lesson Plans. But then I had a bit of a snag. The lessons required that I open the files from the From Upload option on the Studio 5000 start up screen. Only, it wasn't there! There is no From Upload option on the start up screen. Anyone have any ideas how or why it's not there, and most importantly, how to get it there? It's kind of important!   Thanks!
  17. I got a CJ1M CPU11 that I can connect to but I can just go to run mode but when I try to switch to program mode I'm tell that I can modify the mode

  18. Quick Panel (TCP model) Upload

    cajunconfigurator posted a topic in HMI & SCADA

    Hello All, I have an older Total Control Quick Panel QPI2D100L2P 10.4 inch Monochrome that I am trying to retrieve the program on. The original programmer is unknown and we do not have a copy of the program. The screen has gone out on this panel.I am using quickdesigner on an XP virtual machine. I have the correct programming cable the 8 pin DIN connector HMI-CAB-C49-JWhen I connect to the HMI, The software "sees" that the HMI is connected and says "waiting for the Display to be ready" then times out and tells me "the display is Hung" and another message "Turn display OFF" when I turn it off the software gives me the message "Turn Display ON" then when I turn it on, the software goes to "waiting for the Display device to be ready" and just sit there. Nothing more. I have waited for 20 mins for it to progress and nothing. At first I thought maybe the Panel that I am working on is just bad. However I get the same indications on another, same model, quick panel that IS working just fine. I know this is older stuff. And ProFace Support (who took over making the replacements from TCP) wont support using quick designer on anything other than a Win 2K machine or older. Anyone have experience with these panels?
  19. hi.  i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi.   can you bring me some example? i am sorry, my english is Bad
  20. I am unable to read FBD program in RSlogix 5000.It says editor not downloaded.I m able to see ladder logic programs.
  21. Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.

  22. Beckhoff PLC Counter

    DeadPool posted a topic in Other PLCs

    Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool

  23. ST program step count

    Nurlan_B posted a topic in Mitsubishi

    Hello everyone. I can't find my ST program step count in GX WORKS 2. Does anybody knows where is program step count in GX WORKS2 ?

  24. Example of a simple ladder logic program

    chinaplccenter posted a topic in Mitsubishi

     

  25. Brian B

    BrianBoisvert posted a topic in General Topics - The Lounge

    I need help with a program I wrote for school that didn't work quite right.  I have to make a chasing light program that will freeze the lights when a PB is engaged and reverse when PB is engaged on light 1.  The assignment has already been turned in but our instructor ( if you want to call him that) has told us a similar sequence will be on the final.  Can anyone help me out??