Search the Community

Showing results for tags 'b&r swpic-3 prosys programming'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 42 results

  1. Looking for programmer help

    Hello, I am not sure if this is an appropriate place for this but we are a company that does electrical engineering for material handling systems in north Dallas, TX. We are looking for an experienced Siemens programmer to help train one of our engineers.He is writing a program from scratch and has not worked with Siemens before. We would need this person on-site for a few days to a week and they will be compensated as well as travel expenses paid. Our engineer will have very specific questions to ask as he is very experienced and has been doing this for many years- this is just a new system for him. If you are interested in this opportunity please contact me as soon as possible. 
  2. Hello, I got a new work job to design a cycle tester for a mechanism to make sure will work for at least 5000 cycles open - close. I never made a pls program I start researching few days ago and seams to be very complicate to make it. I have a TM221C16R PLC from Schneider. please help me with some instructions. the cycle tester will have a start pushbutton, stop pushbutton, door open switch, one air cylinder with solenoid to push and pull and a counter. Thank you, Romica
  3. Hello to all! Kindly provide me 1-Download link for RS logix 5000 v7.2 .i have a program which is designed in old version of Rs logix 5000 and i m unable to open it on v20.0 2- ControlLogix 5550 1756-L1 controller Serial Cable pinout [plc to pc]-Programming cable Thanks
  4. Hi, I am a beginner to PLC. I am currently working on a home project with Allen Bradley 1100 model. The project is to build a door open-shut cycle tester.  The motor I have purchased is a Bodine Brushless DC34B/FV INTEGRAmotor. My goal is to utilize the Allen Bradley to to control the motor and then the motor drive a shaft to open/shut the door. Through the LCD screen the of PLC, we can set and view the amount of cycles.  I have finished the initial stage of wiring. But not sure how should I start on the programming part. Could any of you give me any hints on the programming portion? Thank you so much. 
  5. hey!  I'm pretty new to PLC's, and I'm supposed to ''teach'' the people at my internship how this PLC works, but I have encountered a problem.  I've gotten pretty far with all the digital programming and understanding how everything works, but I just can't figure out how the analog inputs/outputs and programming works...... I've had a fair explaination on PID and how this works. I've searched the web as well to figure out what PLC instructions to use.    I hope you can answer my following questions.    1, what are the most used PLC instruction blocks which I can use for temperature control, and how am I supposed to use them? 2, Could you please give me an example on how to use PID and what numbers will I need for the calculations? 3, what are the most used PLC Instruction blocks (apart form the analog ones) that I should include in my tutorial?   this is my setup: Ethernet switch MOXA EDS-205 Plc voeding PA202 PLC CPU CJ1MCPU11-ETN Digital IN (16x) CJ1W-ID211 (SL) Digital IN (16x) CJ1W-ID211 (SL) Analog IN (8x) CJ1W-AD081 (SL) Analog IN (8x) CJ1W-AD081 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) TRANS OUT (16x) CJ1W-OD212 (SL) Analog OUT (4x) CJ1W-DA041 (SL)   thank you soo much for looking at my question and considering helping me! the OMRON helpdesk hasn't been very helpfull.    kind regards,    Deuslupos,
  6.  hello there ! all the variables are reals ... can anyone explain why i get a different result when i calculate c2 first ??? the two programs shown in the pictures are exactly the same ... the only difference is the posistion of c1 and c2 . please help me . It's not a logic  attitude in programming ..... Any ideas? Thank you
  7. I am used to programming a1s Plc using the old melsec medoc. Can I program from a Windows 10 laptop and if so what software would I need? Also cables? Thanks p
  8. PLC Programmer Job

    Hi there! I`m a PLC programmer from Romania and i work in automotive industry. I know to program in Step 7 and in Codesys. I`ve been working with S7-300 from Siemens and Wago 750-881. I am also designing the electrical drawing for my project in a software called WSCAD. I am trying to leave abroad because i have a low salary here and i am wasting my knowledge. Can anyone give me an advice or help me with finding a normal paying job in plc programming? Thank you very much in advance and have a really nice day!
  9. Hello! I have a PLC S7-1200 (1212C DC/DC/DC) and a few question about programming S7-1200 in TIA Portal v13. 1. I want to make "upload station", because I am not surre whichone project is the last. But, when I start upload data, the error hapens, and the decription of error is: The name of the station "S7-1200 Station_1" is already in use in the project. How and where can I change it? 2. And the last question: I try to connect my S7-1200 and Weintek simualtion. There is all time :"PLC not connected". I have chceck everything: PLC is OK, communication PC-PLC ok (ping ok), windows firewall off, administrator rights ok, configuration made with manuals, (CPU - Siemens S7-1200, IP:, port 102, tags import - ok.) I have read the manual many times, and check settings - nothing change. Maybe have someone problems like this, and found a solution? PLC: 6ES7212-1AE40-0XB0 WIndows: 7 Proffessional 32 bit Program: TIA Portal V13 Basics Weintek: EasyBuilder Pro V5.02.01 Best Regards! Andrzej.
  10. I am converting a PLC-5-40 processor that also has a SST side car for Profibus Dp communication to BK3100 modules on the equipment. To a Control Logix L-72 processsor using a Molex SST-PB3-CLX card to the Profibus modules. Everything went some what smooth until I got to the SSI transducers in the Profibus. The word arrangement is not coming in the same as with the PLC-5. Is there anybody else that has run into this problem and is there a solution. I have contacted Molex, Balluff and Beckhoff the first 2 got back to me I am still waiting on Beckhoff.
  11. Panasonic FP-X C30R

    I'm very much a novice to plc programming. I've dabbled in years past with Mitsubishi FX units with Medoc long before G X Developer became available. I also did a bit on Schneider using Zelio software. All very much simple stuff using ladder logic and internal relays But I've got me a Panasonic PLC that is surplus to requirements where I work and I would like to investigate the possibility of using it for practice purposes. Who knows, I might even get it to do something useful. I expect it is a few years old - its got a version No 2.4 and what seems like a date on it 080916. First query - is there software available for this item. Second query will it be compatible with a computer running on Windows 7. I've checked on the internet and see that there is documentation out there the plc. I decided ask for some informed opinion from before I go too far into what turns out to be a "cul de sac". Regards jaymac.
  12. FX3U Programming Manual.pdf

    The FX3U Programming manual is a 995 page secured pdf. You cannot copy-paste from a secured pdf. I reprinted the manual with Soda Pdf and OCR'ed it with Acrobat, using no downsampling. So now i have an unsecured searchable pdf. Cross-platform and free software used: Pdf Split and Merge Basic and Soda PDF: Combine pdf pages Dassault Draftsight: edit and print autocad dwg and dxf, with 3D and scripting support CloneZilla Live: Create and restore a server/ computer image
  13. Hello all, I am trying to download a new program to a AB 1746-BAS SLC 500 BASIC board via RS-232 connection through a Windows 98 laptop running Hyperterminal. While the BASIC board is connected I verify connection by waiting for the board to print out its information in the Hyperterminal program and then enter "CLEAR", "NEW" and finally, "LIST" in Hyperterminal to wipe any program from the board and verify the board is clean respectively. Then I load the new program via a .TXT file using the "Send Text File" option within the Hyperterminal program. After the program has finished loading I than type "LIST" to verify it has copied over correctly. I than switch the SLC over to "Program Mode" via the key. After doing so I type "RAM" to select the program i just uploaded to the BASIC board and then type "PROG" in the Hyperterminal program. I than receive the "Programming Sequence Failure". If anyone has any advice as to what I am doing wrong it would be greatly appreciated. Below is a list of everything I have set and researched. Thank you in advance, James -Laptop: Windows 98, Hyperterminal -BASIC board (programming): JW1 pin: 1-2 3-4 JW2 pin: 1-2 3-4 JW3 pin: 1-3 2-4 JW4 pin: 5-6 3-4 -RS-232 9-pin connector: Pin 2 connected to Tx Pin 3 connected to RX Pin 5 connected to ground Pins (4/6) crossed DSR/DTR Pins (7/8) crossed RTS/CTS -Hypterminal: Direct Com1 bits per second: 1200 parity: none stop bits: 1 Flow control: Xon/Xoff Settings/properties: -> Emulation VT100 -> ASCII line/character delay: 30 milliseconds check box: Append line check box: Wrap lines... -Manuals: 1746-rm001 1746-pm001
  14. Dear all, I need some help with programming time in concept 2.6 in FBD. I use momentum PLC 171 CCC 980 30-IEC I would like to program 24Hours Clock with day, week and year. Can someone help me with this please. Regards Sam
  15. Buy what PLC?

    Hi I want to buy a PLC and additional required stuff, to play with at home. Where do I find cheap PLCs? What software do I need to make this work with a Windows 8 PC? What other physical interface and software is needed/recommended?
  16. FX2N-232IF module programming

    Hi All, I want to connect 3 nos. Barcode scanner with FX-3U PLC, So I am using 232BD card, 232-ADP card and 232-IF card. I need help for FX2N-232IF card programming for Motorola Barcode scanner. I am already done programming with 232-BD & 232-APD card using RS Instruction. But in 232-IF card TO/FROM instruction required. Anyone have FX2N-232IF Card program sample so please send me. My mail id:-
  17. Texas Instruments TI 164

    Any one out there have a programmer for one of these old PLC's or can any one recommend some where I could send one and have the program printed off for trouble shooting ? Thanks !