Search the Community

Showing results for tags 'advanced interface converter (aic +)'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 18 results

  1. Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out.       iQ-F Customer News regarding FW Update 08-2018.pdf
  2. Hello all. I have been working with an SLC 5/04 system, which houses various Digital and Analog INs and OUTs, up to Slot 29. I am currently mainly working with Slot 25, an Analog Input: 1746-NI16I. This is a system which has already been set up and has been running for the best part of 8-10 years. This particular card has had some spare inputs, one of which I am trying to connect to. In the Advanced Configuration, only a few Channels are actually "Enabled", and each channel is pretty much slightly different from another in terms of Input Type, Filter Frequency and Data Format. I am trying to set up Input 14, which is Channel 15, to "Enable" it, 4-20mA Input Type, Filter Frequency of 6 Hz and Data Format of either Raw/Proportional or Engineering Units. Now, after I have made my choices, I click apply, and then OK. I am then confronted by a pop-up which states: "Configuration Rung and Data Integer Data File Number: 25 Integer Data Element: 100 Rung to be inserted: XIC S2:1/15 COP #N25:100 #O0:25.0 24 At Program File Number: 4 82" I have the options of OK or Cancel. If I click OK, I now have LAD 4, Rung 82 Highlighted. This First Scan Bit and COP function were already here, but does that mean I have now altered what is being written to "#O:25.0"? I now Download the Changes. However, after all this, I am not getting any Analog input reading coming in from the Live PLC. What is this COP function? What does it do? How do I properly set up this Analog Card?   Thanks for your time, -Jame
  3. Communication

    good evening. Someone can give tips on how to configure and physical the application with the following items: Advanced Interface Converters (AIC +), PanelView800 2711R-T7T A and MicroLogix 1500 Programmable Controllers My doubts are about the configuration of the communication, and I have doubts about the physical environment and protocol to be used.  
  4. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  5. My client is a pharmaceutical company and they want to interface their Blood Gas Analyzer (which is a RAPIDPoint 500) to a Controllogix PLC via EtherNet. I have attached a Spec that I found, which gives the initial information you would need to do this. It says that the BGA can transmit data in ASCII. However, it doesn't list what bits I need to send to the device in order for it to send the PLC the data. I've tried contacting Siemen's (who makes the BGA) and they were useless. I also tried searching the RA knowledgebase.  Does anyone have any insight on how to communicate with a device in this way? Thank you Tyler RP500_LIS_5_20_13_-_Rev_C_.pdf
  6. Actuator Sensor Interface

    I first saw AS-i at a factory this week and am trying to figure out what Allen Bradley modules can interface it. I am not finding anything, does AS-I go under some different name?
  7. CX Supervisor Modbus RTU

    Can CX Supervisor be used as modbus RTU master using RS232/RS485 or USB/RS485 converter to connect it to PLC or panelmeter or other modbus slave units and how? Any example? Thanks in advance Goran
  8. Hello Guys, I Need some information about conncting method between cx-programmer and cx-supervisor? Anyone can explain? Please help me! thank you.
  9. I'm trying to connect a 2711-K5A8L1 FRN 3.13 PanelView 550 (DH+ three wire connector) to a 1747-L553 SER C REV C (RS232 and ENET). I read that I may need FRN 3.3 on the PanelView 550 to do a passthrough. This will be a dedicated connection with no other devices. The PanelView 550 has only the three wire DH+ connector and an RS232 printer port. I was trying to connect PanelBuilder 32 to the RS232 port and may only have PRINT and DOWNLOAD capability on this port. Is there an inexpensive way to connect the PanelView 550 and the PLC CPU? Something like the 1761-NET-AIC would be fine, but I did not see an option for DH+  .
  10. Problem with Ethernet module CMM321

    Hi, I am new in the group and also a new user of PLC series 90-30 an we have a communication issue. I want to know how to go to baseplate configuration window through Cimplicity machine edition?
  11. Beckhoff and AS-Interface

    Hi, I’m trying to control 10 Safety switchgear using AS interface, and since I’m using Beckhoff as a PLC I want to use "KL6211 | AS-Interface master terminal" as a Gateway but since this is the first time I’m using Beckhoff I’m a bit lost, So my questions are: -          Is it a good idea to use a Beckhoff ASI terminal? -          How to configure it? -          Is there a possibility to configure it using embedded PC ( I’m using CX2030)? Excuse my English.
  12. Analog module configurations

    hai everyone im new to this forum, i hope this forum will clear all my doubts about plc Ok Guys my doubt is How  to connect two, three, four wire sensors to S7 PLC's? Please help me guys im new to PLC Controlling Thank you.
  13. Programming a HMI to revert to Home Screen

    Hello everyone, I was wondering if anyone here could explain to me how I can program my human-machine interface (HMI) to revert to a Home Screen after a period of inactivity. If the user has to leave at any time, and leaves the HMI on the last screen he/she was working on, I want the HMI to revert back to my Home Screen after 60 seconds inactivity. Has anyone here done anything similar to this before? Do you think it's worth the trouble of having such a function built into the HMI? Thank you for your time and for reading.
  14. Hi guys, I'm in the middle of a little university project, I'm attempting to implement a control system purely based on artificial intelligence. A neural network will be used to map the characteristics of a power plant. A fuzzy logic controller will be used instead of the conventional PID and finally a genetic algorithm will be used to tune the controller while the system is online. This is all simulated of course. Each of those AI's will be developed in Matlab. Only problem with that is, is it outputs the code in C or C++ (From memory). I would have to convert this to structured text (Based on Pascal). So to circumvent this problem I thought I would just directly interface matlab to the PLC (Schneiders M340).  My idea being, all the calculations are done in matlab which are then sent back to the PLC. However this presents me with a new problem of how I would be able to interface matlab to the PLC. If anyone has experience with this sort of connectivity, any advice would be greatly appreciated. Thank you in advance, Luchek
  15. How to configure the connections between the PLC and HMI in the draft TIA Portal WinCC Flexible depending on the type of network we are connecting the touch screen. Read more and have a look to this... http://www.tecnoplc.com/conexiones-wincc-flexible-comunicacion-plc-y-hmi/   -------------------------------------------------------------------------------------- www.tecnoplc.com
  16. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  17. Motoman Support

    I have a project that currently has a PC using C++ to send commands over to a Motoman Robot for palletizing. My customer wants to get rid of the PC since no one on the plant floor can troubleshoot if the PC goes down. They're asking that I put a PLC in in lieu of the PC, and control from there. The PLC and respective code is no problem, where I'm stuck is gathering info on what protocol I can use on the Motoman. My goal is to make the Motoman as "dumb" as possible and control everything from the PLC. Can anyone tell me what protocol I can use with the Motoman, details below: Robot Type: EPL80Controller Type: NX100Software Version: NS4.02 A(JP/US)-00
  18. frequency converter

    Hi guys I Have Question of Propo variator converter that there kind of drives her PHASE IN (230v) AND Nature / OUTPUT TO THE ENGINE 3 PHASE (UVW)? -or if required entry 3 phase (RST) and output TO MOTOR 3 phase (UVW)? I would be happy to answer :)