Search the Community

Showing results for tags 'slow as a wet week on windows 10 - problem solved'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 67 results

  1. CP1E-N40 + CP1W-TS102

    Hi ! I have a question regarding the handling of the signal from the TS102 connected to my PLC.   I downloaded a .pdf  LINKED from "my omron", read it and put together a small program just to test the expansion unit and sensors. But I cant get any readings from the sensors and can't figure out why. I have never used a TS102 expansion unit before and would be glad if someone have an idea of what I'm doing wrong. Everything is brand new, so I'm quite sure I am the problem here..... If someone have an answer and maybe even an programming example to upload I would really appreciate it. Best Regards!  PT100 sensor test 3.cxp
  2. Looking for ideas on connectivity issues with RSLinx/RSlogix when using an EWON Cosy 131 running on Windows 10. So here's whats up: Was running windows 7, could connect to the EWON VPN and use the ethernet driver in RSLinx to get to the PLC(compact logix). Also used Automation Direct C-more software with no problem as well. Now on Windows 10, the Automation Direct software still works fine, i can ping the PLC and get to its webserver but rslinx/logix will not pick up the plc. I have tried setting up a new ethernet driver to no avail. I also connected a cable directly to the plc from the pc, bypassing the ewon, and rslinx/logix will then see the plc, so rslinx does seem to "work" in windows 10. Any ideas on how to get connectivity back over the EWON VPN? I have these in customer plants and really dont want to revert back to win 7.   Thanks    
  3. Popup windows on the FT View SE v8

    Dear Experts, I want to pop up a window automatically when a tag value becomes high. Please tell me how can i do it??? Eagerly waiting.
  4. Factroy talk SE v8.0 screen problem

    Dear Experts!!! I am facing one problem in FT View SE v8.0 : I have 15 screens : 5 "are replaceable" with full resolution and other 10 are popup displays with half the resolution of that of Monitor and are "on the top" type. I have a buttons to go to those pop up screens. Whenever I press any button to open any pop up screen the background screen (Replacable type, full screen) becomes shorten and pop up displays works like they should. i.e. whenever a pop up display opens, full background screen display suppresses automatically. Then i go to another full screen and then come to the main working full screen then it becomes ok. This phenomenon occurs whenever a pop up display open (not VBA controlled). Its a simple display open button ( not VBA controlled) As you can see in the picture the back image is suppressed :- http://postimg.org/image/c5um49c5h/ Normally it comes to full screen , its like :- http://postimg.org/image/vtli1bd7f/ when I go to some other replaceable type screen and come back again to this screen, it becomes OK. Here in this pic below, you can see the properties of the screen which is giving problem :- http://postimg.org/image/gcqpkfb65/
  5. PIDE autotune problem

    Dear Experts!!!! Can you tell me the complete clear cut procedure of  PIDE autotune functioin And plz tell me when i shoukd do it ??? I.e. when the set point near the actual or when its far away and reaching to the SP. Can't i do it in FBD in Auto mode :  If yes then how??? Have to put FBD Block in manual mode always???? Any other way to autotune it???  
  6. OMRON CJ1M CPU 21

    Hello to all Since a certain time I've noticed that the parameters values sent to the plc via IHM are not anymore recognized by the plc I'm obliged to re-enter other parameter values to see the machine working fine again. The plc reference is: CJ1M CP 21 The IHM reference is NS10 What would be the problem,? Best regards.
  7. CS1G-H CPU42 with CS1W-PRM21 problem

    Hello everybody, I have a problem connecting CS1G-H CPU42 with CS1W-PRM21. Prm21 is inserted in slot 9, and i have previously made connection to prm21. After downloading configuration to prm21 i cant connect to prm21 anymore (connection to plc is working fine). The cx-configurator says CS1W-PRM21 PROFIBUS DP-V1 Master Communication Failure with UnitERH is on (red), BF is flashing red, RUN is on (green), PRM is on (green) and BST is flashing green. How can i restore comunication with the cs1w-prm21 to diagnose the problem? After some examination the problem is (probably) that i have configured prm21 to write in the adresses of CIO3000 to CIO3400. That is interfiering with other address. Is there any way to force the output of the prm21 off, or make device go in offline mode.At the power on of the prm21, i can test the connection via cx-configurator and is working and after 2 seconds the prm21 goes to stop mode and begin writing to address of the sysmac bus area. I am thinking if i can stop prm21 from writing to that area i will be able to connect and load default configuration.is that any way to stop the prm21 from automatic start? or is there a way to reset prm21 to factory settings? best regards
  8. I have a PVPlus 600 model with 5.10.03.09 firmware. This version does NOT have an Exit [F8] button to allow access to the Windows CE underneath. What, if any, firmware will allow this? Can I use a keyboard to force the FT Configuration to quit into Windows CE?
  9. Good day, I´m helping with small project and currently i am stuck because of this problem. And I hope you can help me out. I´m using PowerFlex 525 connected with AB CompactLogix 1769-33ER PLC via EtherNet/IP. Connection is working, I can read and write values from/to 525. To configure both devices i´m using RSLogix 5000. 1) First problem occurs after I loaded configuration to 525 and it´s, that 525 keeps overwriting values of Accel and Decel Time 1. It happens when i directly change parameters in Module Properties (online) or after I upload configuration to device. It happens even if i set parameters directly to 525 with its HMI panel. - I kinda get around this problem when i use Accel/Decel Time 2 for Step logic, but if i send direct reference value motor still jump to it and that is not good, especially when changing direction of rotation. 2) Second problem is that I cant get Speed Sources and Start References right. Usually Is working only option 1 and others are not, or they are doing something else that they should. For better imagination this is what i want to do: I have 3-state switch (left = 1 ON(DigIn TrmBlk 02), 2 OFF; center = 1 OFF, 2 OFF; right = 1 OFF, 2 ON(DigIn TrmBlk 03)), In center position I want to control 525 with EtherNet (already working when: Start 1 AND Speed 1 = EtherNet/IP). In left position I want to control motor directly with Drive Pot and In left position a want to start Step Logic (which i have already set) - Funny thing, If I set Start 1 = Ethernet, Speed 1 = Step, Start 2,3 = DigIn, Speed 2,3 = Drive Pot then in all three position motor goes in Step logic.. Or when i get left and right position working then Ethernet is blocked.. and this kind of things.. I Attach print-screen of my current settings, if you need something more just, tell me. Thank you for your time, and I hope someone will be able to help me.
  10. Hi guys, I have a problem with GX IEC Developer 7.04, i hope some of you can help me. When i try to connect with the PLC type - Melsec FX1s- 30MR-DC, there is an error: I check all COM port settings, and everything is ok. Com_port parameters: FX Parameters: Transfer setup: PLC Type in the program is the same like physical one (FX1s). I try to change all of this stuffs but there is no result. The cable I use for comunnication is this type: Thank you very much in advance. Have a nice day! eng R. Bukov
  11. CPU 314IFM adress

    Hi, I have a CPU 314IFM order number 6ES7 314-5AE10-0AB0 when i select it in hardware config it show I/Q adress 124 -155 while it should be to 129 only (the manual mention that and it covers all inputs and outputs and the special funaction also) I try (offline) to change the order number only (another 314IFM) found it give different address range for each CPU while it all have 20 DI/16DO 4AI and 1AO
  12. Hello all, I'm new to this forum, hope I will be able to get some answers on this forum. I'm wotking on maintanance for machines under productiona and I would like to conect one machine to my work PC. But when I try to setup conection with RSLinx, RSLinx don't see my PLC. Problem is that my PC is on network with IP addresses 192.168.8.XXX and machine is on 192.168.0.1 IP address and between is cisco RV180 routher which is set to have LAN address 192.168.8.168 (company network), and WAN is set as 192.168.0.200 (subnet 255.255.255.0, gateway 192.168.0.201, dns 192.168.0.202). When I conect directly 1756 ENBT/A card to my laptop (laptop is set to same range of IP addresses) I can see PLC and everything is working but this way is not practical for me. Is there any way to conect my office PC to PLC, some settings in RSLinx Clasic? Any idea would be helpful. I attached simplified network drawing for easyer understanding. network.pdf Thank you for your time and help, best regards, baric1007
  13. Keyenece , read PLC KV40

    Anyone know how to read a program of KV 40 with protection MEMSW $ 8,000. It's an old ladder diagram I want to retrieve. I've seen this link which talks Pseudo reading it. Link http://forums.mrplc.com/index.php?showtopic=6782 Thanks, Ágora
  14. OMRON PLC's and CITECT Comunication

    Hi All; I am struggeling to get my CITECT to talk with my CJ1MCPU12 with ETN21 module. I can ping the IP address from the citect PC and also connect CXONE using ethernet with supplied IP Address. I do not have FINSGATEAY installed as the PC is Windows 8 with CITECT 7.4. Any Ideas would be most welcome as I am drawing a blank. My settings are OMRON ETN21 IP: 192.168.0.3 Unit number: 0 Citect SCADA Primary Server IP: 192.168.0.24 Citect.INI [OMFINS] Source = 1/3/0 (not too sure what this should be...) COMMUNICATION settings: [bOARD] Name: BOARD1 Board Type: TCPIP Address: 0 [PORTS] Name: PORT1_BOARD1 Board name: BOARD1 Special Opt: -I192.168.0.3 -P9600 -U [i/O DEVICES] Name: Internal Number: 1 Address: 1/3/0/S Protocol: OMFINS3 Port Name: PORT1_BOARD1 Startup Mode: Primary Prioirity: 1 Memory: True
  15. wich plc to chose?

    Hello all! I have one problem and i need an advice. I search for fast plc, that could have minimum plc cycle. I got 2 inductive sensors 0-10V (0.5 - 2mm). I connect this sensor with plc. On plc is connected shaft encoder which is 360ppr. My task is protech a stamping tool betwen stamping and if inside tool is some bad stamping pease we muss stop stamping. i control heigh of the stamping tool with inductive sensor. Right moment for measurement i get from incremental encoder. For example: I want to measure highof the tool at 90° - 180°, so when the tool if fully pressed. Now i have Unitronic plc with plc cycle cca. 2.5 mS and only one interrupt at 1.25mS and HSC interrupt at 359° (for reset at 0). But this plc is to slow for this application. Machine run at 200 rotations per munute, so i need interrupt less then 1mS (for one degree accurity). SO i need fast plc that can do those things fast. Most importanten is Analog to Digital conversion speed. Unitronics need cca 60mS for two analog conversion, this is too much. SO i need to do those things fast: 1. interrupt for hsc for set counter on 0 2. set interupt for hsc at 90° (at rising edge) (for high measurment 3. interrupt for analog input? I need fast AD conversion so that i can check for high of the tool every one degree. so which plc shuld i use?
  16. I am trying to setup communication between an EIP21 and a AB Compactlogix processor. Setup both units with Network configurator and Logix5000. In Logix5000 I used the Generic Ethernet Module with the correct consumer and producer tags and instances. When I go online Logix can see the EIP and bring up the module information but the connection itself is in Error 16#0114 Electronic keying Error. Unfortunately cannot find a way to disable keying like possible on the Controllogix Ethernet module. Can Anyone help. An application example or some tips how to resolve it would be great. Kind Regards Rolf
  17. I am planning on buying a new laptop computer and I need to be able to run RSLogix Micro Starter Lite and RSLinx Lite (the free download version). The release notes for RSLogix Micro Starter Lite list which operating systems are supported. Windows 8.1 is not on the list, but that is the operating system that will be on the new computer that I am looking at. Does anyone know if it will run on Win 8.1? I would sure appreciate any information I could get on this. Thanks Mark