Search the Community

Showing results for tags 'serial ports cp1l-em'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 156 results

  1. CP1L connected with scanner symbol DS-4308 reading 2D data matrix,  with RS-232 on board CP1W-CIF01 Hi all, need some help because I can't read the information. Let me explain, I have a PLC, " CP1L-L14DR-D " with a RS-232 option borad " CP1W-CIF01 " , a scanner Symbol DS-4308, and I'm trying to read a data matrix 2d barcode (I don't know if that matters). so I build a cable with the next configuration, (one side male and the other female) PORT CONFIG PIN OUT SCANNER CABLE RJ-50 TO RS-232 PINOUT Maybe I'm missing a connection? a bridge? power supply ? ground?   in the program, I only have this to check the communication,       When my reception flag complete (A392.06), my instruction RXD is going to execcute, reading in D1500 the data. if is any error in communication (A392.04) or overflow (A392.07), my port is going to restart (A526.00) (ignore w0.03) with the followign config: (9600, 7,2,E, RS-232C, End code: Received Bytes 3       and I'm reading only, data on D1500 and D1501, and the data makes no sense.   with the configuration of End Code: CR, LF,          can't make it work, I read nothing. and if I change the END CODE: Received bytes to 4,      don't work. and my flag A392.04 go to ON.   PLC HAS 4 PIN SWITCH, ALL ARE OFF The configuration on the scanner is setting to default and then config to RS-232 Standard.   So, what I'm missing?  bad connections? plc don't support? scanner config? program?      

  2. A Series PLC and Data extraction

    inpras posted a topic in Mitsubishi

    Hello All, What are the methods to get the monitoring data from A series PLC? I know its not supported any more, interface modules are not available...,    So the basically,   If I want to write customer software (may be embedded) what is the protocol I need to follow? I am connected to CPU unit by the way, there is no other modules except few digital and analog interfaces on PLC. Thank you in advance for your direction, direction in any way would help!

  3. SUPERVISION OF A CHAIN

    trabelsi posted a topic in Omron

    I have 6 PLCs CPM2A and 4 PLCs CP1LM I'm going to network them to do the supervision and data acquisition from each PLC and connects them to a pc via an ethernet port So what are the hardware and software used?
  4.  Hello    I need to sent data between PLC CP1L-M30 and  Hyberterminal with serial port (RS232C port 1) ,but there isn't data show up . something is wrong? Could you advise me? my ladder as below  

  5. mitsubhishi serial drivers

    minal pai posted a topic in Mitsubishi

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  

  6. mitsubhishi serial drivers

    minal pai posted a topic in Mitsubishi

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  

  7. PLC TO HMI

    Sprudle posted a topic in CX-Programmer

    Hi I am a beginner within PLC, I have attended high school and will attend an oral and practical test in January. To become a "licensed" automatician. Total 4.5 years of school and practice. (NORWAY) I have programmed a little omron before, but not with HMI I'm having trouble getting plc to communicate with HMI. I get CX-Designer to communicate with both PLC and HMI.   Hardware: CP1L-EL20DT1-D     NS5-SQ11B-V2     W4S1-03B     Omron 3-port basic ethernet switch 3x Ethernet Cat.6 patch cable   Thanks for reply
  8. Hi, In the attachment there is my code.  Setup is set correctly, because when I send data from PC to PLC everything works (data is read and LED Comm blinks), The problem is with TXD. After startup A392.05 is ON when I execute rung no LED blink either no data comes to PC and  A392.05 become OFF until f.e A526.00 set to ON Any idea why data is not send from PLC?  HMM  
  9. Morning Guys, For my latest project I need to read a gas sensor via 485 from a Momentum PLC. I've been through the help files, but they seem to only raise more questions than they answer, they only seem to reference PLC -> PLC comms. I've had a play with the 'MBP_MSTR' & 'OUT_IN_MBUS' function blocks, but i can't seem to get anywhere, Has anyone got any examples of reading in data via 485, or can anyone lead me in the right direction?
  10. So, hello all. I'm new in Omron PLC. Using: CP1L-EM controll + CP1W-TS102 (x3) Problem: I need to regulate the valve with motor drive. You can meet the same in heating system for control the temperature of water. Logic is simple,  - low temperature? - open valve step-by-step - high temperature? - close the value step-by-step I always use PWM regulation, but in Omron PWM only for encoder (srsly, i don't need 10k impulses during short period of time, i need just several impulses during the time) So, i decided to use TPO. The input calue for TPO is output value from PIDAT. (W451 manual, description of TPO function, example) What's the problem?  1. I need to make difference time between impulses.  Look here: I have 55 C temperature of the water, but i need 80 C, so i need impules for 8-10 sec duration, but when the temper close to 75-79 degress i need the impuls 1-2 sec duration. And, as i read, TPO cant do this, right? Just constant duration in 1 TPO instruction, or use several TPO instruction. Other situation, i have 80 degree Celsius, but i need 50 C, so i need to close the valve.  But i have only 1 TPO! So i need to check the difference beetwen SP (set point of temperature) and PV (process value) and if it hegative - go to PIDAT #1, which connected with TPO #1 and close the valve (SP-PV need to be around 0) If i have positive value (SP-PV) i need to go to PIDAT #2 wich connected with TPO #2.....  Srsly? I cant make the measure between -100 .... 100 for 1 TPO function and use 2 digital output?  I know that 0...10v regulation is better, but i have that i have =)   Sincerely, p001p

  11. How can I simulate CP1L-E & NB HMI?

    strantor_ posted a topic in Omron

    Sorry for polluting the internet; I already posted this on plctalk. Then I remembered there are more Omron experts over here, including @Jay Anthony who I've worked with before. Anyway, here goes... I am trying to write a program in CX-programmer and a UI in NB-designer, and simulate both in communication with each other. My previous Omron HMI experience has been in CX-designer, which interfaces seamlessly into CX-programmer and I can simulate both at once easily. This NB application has me confounded. I tried using the CX-simulator and was able to connect CX-programmer to it, but not NB designer.Is this even possible?  

  12. RS485 Async

    ndutrastocktn posted a topic in Computer Help and Networking

    Hey guys I don't have much experience in PLC serial communication and I'm tasked to integrate 6 OP-905 scales with our EATON based control system. The scales are rs485 asynchronous serial communication, my concern is that if the device is not designed to be an RTU then I cannot use modbus. And if that is the case how do I talk to multiple scales using the async protocol. Has anyone done this in a similar platform? 
  13. Hello, is there a way, to edit E5CC-T temperature controller internal program, using CP1L-EM PLC, connected to temperature controller via rs-485 communication? I can't find any information about doing it. I know that i cat change these programs, using CX-Thermo, but that is not an option. I need to do that, using only PLC..
  14. Hello,             I need to communicate Power meters ( GE Multilin EPM 5500P) to  GE Multilin EnerVista Software. The present communication system uses Ethernet for communication from LAN Switch to Computer. There are a few existing Power Meters which need to be connected to the  Network. The Meters having output ports as RS485. I need to use a convertor for that right. So when I contacted GE they told me to use GE Multilinet Serial to Ethernet Convertor. But due to the price and unavailability of the material I am thinking to use a universal convertor. Is that compatible for Multilin Devices?? and In Case of using a universal Convertor does we need any other drivers for that. Please Help Me.. Thanks In Advance  mnetman-a3.pdf multinet (1).pdf PM-GE.pdf
  15. Hello everyone, I have difficulty to setting up the GSM configuration or the serial RTU configuration so that I allow you with another RTU. I use Schneider CPU Modicon M340 in conjunction with RTU communication NOR0200H and a Modem Schneider SR02 MOD02. This is the first time I'm working on this kind of project, want to help me, I'm stuck and I need a solution, thank you for your time.  
  16. Hi to everyone,    I have done an intense search on the web and this form, also went on to the download section here to try out a simple RS232 program, so far I can't get it work. Long story short, I am working on a PLC CP1E( w/ built in RS232) to communicate with the PC hyper-terminal . PC will send a string of messages to the PLC, then the PLC will convert the message to a pulse parameter, eg. computer will send ( 90, 40) to PLC, then the PLC will take the string 90 to pulses parameter( PLS2) and 40 will be the duration period. I am willing to learn and try out your sample program, let me know! THank you in advance.  
  17. hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC.  there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email: jeremietang531@gmail.com      
  18. Hi all. Firstly, I am not a programmer, I just need advice. We have HMI's using NS-Runtime and we keep getting this message. Now, this is why I am contacting you all. This has happened over 20 times on 20 different HMI's which we have replaced over the last 3 years. We have been told by our software supplier that the com port is "on it's way out". There is NO WAY over 20 hmi's over that period will deveop com port faults. So my question guys, can someone give me a few tips on what to try before I change HMI's over ervery dang mponth please? I am really at the end of my tether here. We connect our HMI's to the Omron PLC's via a standard serial. If we change to another HMI the machine communicates after obviously a long period of downtime. Should we reset the plc? I will take ANY advise please guys.
  19. Hi,  I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
  20. Dear All   Sorry for my English I have Siemens CM1241 (picture attach) and need to communicate with Intellisys XE 90 via Modbus RTU, period. The problem is, form XE 90 the connector is Phoenix Contact 2-Position Screw Plug Connectors MC 1,5/ 2-ST-3,81 1803578,or in other word, only 2 contacts form P9 COM1 = L1 , L2 (picture attach). How we connect it to DB9 Female in CM1241? What signal go to what Pin? How about the Ground? Do I need Resistor?   Thanks for all your supports   Best Regards

  21. CP1E RS232 Setup

    MrEngineer posted a topic in CX-Programmer

    Hi everyone, I am fairly new here, I have a CP1E-N40DR-A And i need to send a string of data to a printer over rs232 from the built in port on the PLC, I have had a look online and canot find any information on what I need to do. all the tutorials are for CJ2 cpus ect and the instructions that I would normally use on a CJ2 dont work on CP1E PLC's. Any help or light shed would be great,  Thanks in advance
  22. Hello,   I am looking for examples on using serial communication with a WMS inside Studio 5000.  Sample programs would be ideal. And I would like to get some information on what blocks need to be used. e.g. Send, and Receive   Thanks!

  23. FX3U For GXworks2 and WinCC Flex

    markyspicer posted a topic in Mitsubishi

    Hi, Is there any way in order to monitor both PLC(GXworks2) and HMI(WinCCFlex) using only 1 port from the PLC(FX3U)? I have tried it but I'm not able to communicate the other application(one at a time only).   Thanks!
  24. Hi dear I want control micromaster440 siemens with cp1l omron via rs485 Is there any one help me?
  25. Hello all, I'm using MC Protocol Format 4 to communicate with a VB6 application on a PC. I want to make some slight modifications, and I am getting a sum check error being returned by the module to my application. I believe (haha) I am calculating the sum check code correctly for Format 4 as most commands do work (reading for example). I was wondering if anyone knew of the buffer memory location on the QJ71C24N card that stores what the card is calculating for the sum check? This way I can have a troubleshooting tool to see what I am calculating wrong. I have looked through the manuals (application/basic) for the C24 already as well as the Melsec Reference Protocol manual.  I have attached the error code for reference, again, I am only looking for what the C24 calculates as the sum check code. Thanks