Search the Community
Showing results for tags 'omron modbus'.
Found 709 results
-
Hello Ladies and Gents, Im quite new to working with Omron. I am struggling very much to get online with an Omron CPM2C-S110C. It has a CIF01 card also. I hear this PLC is quite an old one. I have referenced the manual on 'connecting a computer running support software' and double checked I have the correct cables. The ones I am using and the way I am connecting is:- PLC Peripheral slot >> CS1W-CN118 >> XW2Z-200S-CV >> serial to USB >> Laptop Checking on Device Manager, I have all the drivers installed, the comms ports are correctly numbered yet I still cannot connect. There are 4 dip switches on the top right hand side of the CPU and all are swiched off. I have called Omron Tech Support and they said to ignore them in this instance. The RS232C port on the CIF01 is used by a barcode scanner so there is no means to connect through that (I have been told) I feel that I have been through setting and checked in CX-Programmer and nothing looks obscure. Please offer me any ideas you may have. I would greatly appreciate it. Thank you.
-
Hi Everyone, Sometimes I forget to cancel forced bits in omron CJ2M-CPU34 PLC. I want to cancel all forced bits automatically and found something about fins command. I'm now facing difficulty in activating the all cancel forced bits command. (2302) Is there anybody know how to use @CMND command for cancel forced bits? Thank you.
-
At this moment I was asked to change one CJ2M's program (in Ladder, and the PLC is the slave) in order to make a list of desired variables "readable" by the master (an host computer/ SCADA) wich is using the protocol MODBUS-RTU. I only have to work on the PLC' side and i only know the name of the variables and their corresponding address.I already read the "CS/CJ Serial Communication Unit Operation Manual" but i still have some doubts:- The only way to define my slave address is done by writing a code to put the value of the address on the corresponding bits of DM area? or can i define the address using some feature of CX-Programmer?- (A CJ1W-SCU41-V1 is already implemented in the field) on the slave'side i only have to make sure the variables are allocated on the right place, according to the master's commands and modbus' addresses, right?- I read something related to the frames sended by the slave as responses for each master's command, am I supposed to write some code to do this task or it is done automatically?- Imagine the master is using the "Read coils" command, in OMRON there are 4 memory area associated to this data model "Coil" by default it is associated to CIO area, can i switch in the slave to Holding area without problem?Sorry about my english and this extensive text. Thanks.
-
Hi.. I'm new into PLC programming so I dont really know much how to program.. So hopefully there is someone out there that can help me with this or give me some ideas.. Here is the problem; I got 2 inputs signal, A & B.. from this 2 input signal, there will be variable combination of 4 inputs and it will produce different output let say in condition; 1. AAAB - Output 1 2. AABA - Output 2 3. AABB - Output 3 4. ABAA - Output 4 . . . n. BBBB - Output n I'm open to any suggestion and ideas for this.. Btw I'm using OMRON CP1H for this one.. Thank you
-
Hi, I have R04CPU (iQ-R series) on one side and on the other side is QJ71MT91 (modbus tcp/ip module). Is it possible to make communication between them (QJ71MT91 is master and R04CPU is slave)? iQ-R series doesn't have Modbus TCP/IP module, but is it possible to set modbus tcp/ip on built-in ethernet port of R04CPU, and how? Best regards Luka
-
Can Mitsubishi FX3GA-60MT PLC be used as Modbus RS485 Slave? Any sample code or documentation would be very helpful. I am planning to communicate to Weintek HMI (Modbus RS485 master) to FX3GA-60MT PLC (Modbus RS485 Slave). Any other ideas would be nice. Thanks
-
how to connect omron vision camera fh l550 with Siemnes softPLC (IPC)
stmohobb posted a topic in Siemens
i want to connect omron vision controller fh l550 with Soft PLC (IPC) from Siemens through Ethernet or RS232c interfaces, should i use a unit for the communication or can i directly connect the Omron Controller with IPC ? the IPC is connected with other devices via profibus . -
Hi guys, I was programming my CP1L-E over ethernet with no issues at all. I did get an error when uploading my program regarding cycle time, so I went into PLC->Settings->Timings and changed both values to maximum (4000*10ms watch cycle time and 32000ms constant cycle time). Once I restarted the plc it just wouldn't connect. I've tried option cards CP1W-DAM01, CP1W-CIF41, CP1W-EIP21 and i just cannot get comms with the PLC. I can see the CP1W-EIP21 card on my computer, however,, in its own IP address. From what ive figured, the plc is getting stuck somewhere in its boot cycle as I am unable to ping it either. The POWER and RUN lights are both green, and the LNK/ACT light flashes when i connect an ethernet cable to the inbuilt ethernet port. Any help is appreciated, thank you! Any way to factory reset the whole plc or even just the settings? I've disconnected the battery for 30 minutes before plugging it back in aswell but that did not help me.
-
WireShark capture of PC <-> Omron NJ via CIP protocol
zbyszek54 posted a topic in NJ Series / Sysmac Studio
Hello Everyone, I am studying the overview of the CIP Message Communications in Omron's "NJ/NX-series CPU Unit Built-in EtehrNEt/IP Port User's Manual" but not all is clear for me. Could anyone suport me with the WireShark's capture of the PC <-> Omron NJ CIP communication session ? I'd like to see in 'real' world the CIP packets used to read/write of Omron's NJ Global variables. Thanks in advance Zbyszek -
Hello, my name is Danu. I have a project to print label to SATO printer with CP1E from my weighing scale. I can print weight data in label, and i think i dont have a problem with SATO and weighing scale. My question is, can CP1E input the name of user with keyboard or HMI (especially NB7W (because i just have NB7W)) and save it in memory in CP1E? because i want print a label with name of user, weight data, and name of goods. And my second question is, Does Omron PLC have a type that has 3 RS232 or 1 RS232 with 2 optional board for RS485 (CP1W-CIF11) and RS232 (CP1W-CIF01) ? Thank you.
-
Hallo, i want to connect Omron PLC CP1E use CP1W-CIF11 to AD4329A with RS485 communication. my wiring is CP1w-CIF11 AD4329A SDA- SDA & RDA SDB- SDB & RDB and until now, i cant get data from AD4329A. Do you have any clue for this project? Thank you Riandanu PLC to 4329A coba.cxp ad4329aex.pdf
-
I am using PLC Modicon M221, I want to make communication between PLC Modicon M221 to OPC Kepware by modbus tcp/ip ethernet. In PLC, I use software somachine basic, I set digital input and digital output. And in OPC Kepware my address 00001, but when I switch turn On/Off in PLC, value in OPC Kepware doesnt change. Could you please correct me? Thank you Bujang
-
Hello, Maybe somebody know why show this error number and that that mean, how solve this problem? I upload video to youtube https://www.youtube.com/watch?v=Leiya_YreeQ
-
Hello there, I'm having a problem with connecting my Omron CPM1 PLC with KEPServerEX5. The problem is that I can't find any drivers that support a serial connection with the CPM1. The only driver that comes close to what I'm looking for is the Omron FINS Serial driver, but that one only supports the following devices: Even if i choose the CVM1 (that has simular TAG-addresses as the CPM1) I can't get any connection because it requires an ID with the following format (UU.AAA.NNN.) and I have no idea where to get this. I also tried to using the U-CON (user-configurable) driver, but I can't figure out how to get this working. I'm running a program in the CPM1 with a Input(00.01) , Output(10.01) and Timer(T000). I used the Transaction Editor to import these tags in KEPWare: I checked the serial port settings and they are correct. The only thing I'm not sure about is the device ID, but I tried 0 until 5 and I don't think it could be any higher than that. I'm hoping any of you guys is experienced with making a serial connection to KEPWare and is able to help me with this problem. Jimmy
-
Hello! I am using S7-1200 PLC 1212C AC/DC with configured Modbus TCP Server. I can already read/write Inputs/Outputs (Coils) and Memory Words. However I'd like to read/write Memory BITS. Is it possible? If so, how? What addresses should I use in TIA portal? And which function codes on client side? Thanks in advance!
-
Hi,In a project I have four Progressive Pressing Machine. Each machine with different PLC like Mitsubishi 'Q00UCPU' with 'QJ71C24N-R4', 'FX-3U-16M', 'FX2N-128MR' and Omron 'CJ2M-CPU13' with 'SCU41-V1' module.Now my task is to connect all PLC with KEPWARE Server through OPC-UA.Note: There is no Ethernet Port available and existing RS232 port are all connected to all respective HMI'sIn this scenario, I would like to know, do all the PLC that i have mentioned above supports OPC-UA through Ethernet if i add a new Ethernet module to each PLC. So the data transmission will be faster or else should I buy RS232 serial communication module to communicate through OPC-UA.And also i would like to know, what kind of "Industrial Switch" will be perfect for this application.Kindly suggest a best way to prove myself.Thanks in advance
-
I am trying to communicate to a AB 1738-AENTR on a OMRON ethernet/ip network. I have configured the AENTR module through the web browser and have been using Omron's Network Configuration tool to set up the network. I can see the AENTR but cant seem to communicate to it. I think this has something to do with the input and output byte size? Does anyone out there have any experience in setting up a 1738-AENTR in a OMRON system? If so, how do I determine what the proper byte size is? Also, is there something else I should be doing to get the module working?
-
Hi, I would like to know if it is possible to send files (pictures, csv, etc) to the memory card (CF) of a Omron HMI (serie NS) from my computer using FINS Commands. I am not able to find a manual with the FINS commands for a NS HMI. But I think it should be possible. Thanks.
-
Are there any current recipe examples for omron na hmı?
CİHAN posted a topic in NJ Series / Sysmac Studio
Are there any current recipe examples for omron na hmı?Are there any current recipe examples for omron na hmı?Are there any current recipe examples for omron na hmı? -
Hey was just curious if anyone has come across the error message for Sysmac Studio posted. I have uploaded an image. Essentially what happened was I was using sysmac studio, went for lunch and it wouldn't open when I got back. I uninstalled v1.23, ran the remover (1901) and reinstalled it. Still could not open without the error. I uninstalled and tried installing V1.13 (oldest one I have) and again am getting the error. Any help would be much appreciated. Thanks, DJ
-
Omron NA VB : Access buttons from global subroutines
bamf posted a topic in NJ Series / Sysmac Studio
Hello, In sysmac studio, for a NA hmi, is there a way to access a button in Visual basic from a global subroutine ? I always get this when i compile : error BC30456: 'MyPage' is not a member of 'My_NA_HMI'. the code is : My_NA_HMI.MyPage.myButton.IsEnabled = True Regards, -
Allen Bradley Micro 830 with omron hmı
Mesut ŞEN posted a topic in Allen Bradley / Rockwell Automation
Hi everyone; I want to communication Omron NB series HMI with Allen Bradley Micro 830 PLC. I don't know is it possible. İf its that possible, help me please.. -
I have a NB7W HMI connected to a CPIH over RS232. I'm connected to the HMI over USB and when I try to download my project, it starts the downloading GUI process and fails at a random time and shows a popup that says "data reading error". The HMI is locked up at this point and needs to be restarted. This is a fresh HMI and has not previously had a program on it. I created a blank project to make sure I didn't do anything weird in my program, but got the same result when I tried to download. Has anyone experienced something like this before? Its made it as far as 50%, and has also failed almost immediately. Thanks in advance.
-
Two FX3U-485ADP-MB One Modbus Master and Other as General Purpose Serial Port
ritz2610 posted a topic in Mitsubishi
Is it possible to use FX3U-485ADP-MB as a serial port to send and receive user defined string/data to and from a computer? I have a FX3U-32M PLC and two FX3U-485ADP-MB adapters. I have been using PLC with one adapter as Modbus Master. Now i want to use both adapters, where one will be Modbus Master as usual and the other I want to use to send and receive data to and from computer terminal (Example - Realterm). I have a third party 232/485 converter which works really well. Lets me just describe my requirement straight forward. I want to display process parameters on a windows computer based user interface (UI) and also set some variables in PLC from the same UI. The UI has access to serial ports of computer. -
Sysmac Studio Data Edit Variable Declaration Error
Niruban posted a topic in NJ Series / Sysmac Studio
Hi, Now I am using Sysmac Studio - NA HMI. I am facing the problem of Data edit tool here I am unable to give Indirect address. Like this address HM15_Recipe_hmi(Index_No).SetPoint_1 But If I give direct Address its working HM15_Recipe_hmi(8).SetPoint_1 I Hope someone give the solution.
