Search the Community

Hi, I am trying to connect a CP1L-E to a NB7W-TW01B via a 5 port Ethernet switch. I have communication from the laptop to the PLC and from the Laptop to the HMI. but it seems like the HMI and PLC aren't communicating with each other. The HMI will not control the PLC. I've tried everything I know to do with the communication settings and it still will not work. If anyone has any suggestions they would be much appreciated! thanks

Hello, I am using R88D-KN08H-ML2 servo drive with R88M-K75030T-S motor. PLC is CJ2M-CPU35, with NCF71 position control unit. There are total of 6 axis and the one in question with above combination is giving me trouble, rest 5 work OK. I get Overload trip error even at 200% of torque. The motor doesn't move at all. After disconnecting motor power cable, it is possible to move the assembly by hand so nothing sems to be jammed or binding. Tried Auto-Tune, ended with successful completion (at least no errors etc). But scenario didn't change. Motor doesn't have brake, as per model number as well as physically no brake cable on motor. Since all other axes are moving, with similar setting, not sure what is going on here! Any parameters I can change? Any other way to check?

Hello: I am new to Connected Component Workbench and Ladder Logic. I am using a ladder with 2 direct contacts on the first rung in series - the first is a N/O switch and the second is a N/C switch how do I make the second direct contact represent a N/C switch. So that someone else looking at my program would know right off the second switch is a N/C switch. Thanks My program functions as it should but the ladder diagram looks like two N/O switches in series.

Dear experts, I used this forum for help analyzing our PLC setup in the warehouse in 2013 and feedback from the experts here was very helpful. I would like to offer an engagement as freelancer on our project since we need to cut-out a system which runs out of maintenance in Dec 2016. Please see attachment for details and very happy to receive any questions. I hope this is not against the forum rules as I couldn't find a suitable forum "job offers". Kind regards, Gunter Senior PLC Engineer Japan.pdf

Hi all and nice to meet you here! I hope that someone with experience helps me and I hope in future to offer also my help to someone. I am having problem with a Mitsubishi plc with A2N (S1) cpu installed on a machinery. The machinery stayed 20 days switched off and with battery empty as I realised when switched on and the problems come out. I changed the battery but the problem didnt resolved. The plc gave error with stable error led and flashing run led on the cpu. Also an error led stable on a (double role) module of printer and ram. I have to say that I have never used GX developer environment before and it is my first contact with Mitsubishi plcs. Reading some manuals (found on the internet) and by using GX developer I read from plc the faults. Register D9008 was set at 12 error meaning MISSING END INS. I Followed the described flow charts from a2n manual for reseting faults but the situation was the same always as described above. I tried to read the program from plc and succeded to read it. It is a lader with about 6000 lines. Anyway I have no previous experience of the GX development environment but I tried to put the missing END in the program as sugested also by the flow chart in the manual. At this point I have to say that it was automatically added from gx developer as I can remeber from an appeared message. I verified also many times the program on gx developer with the plc and the only difference was that missing END at the last line of ladder program. Anyway I tried to write back to plc the program with correct end but it was not possible. I tried several times. The error mesages took with Gx developer was the following : "THE SAME T/C COIL EXISTS IN PROGRAM (MAIN) AND/OR PROGRAM (MAIN-SFC). THE VALUES ARE SET TO BE THE SAME AS IN THE FIRST FOUND T/C COILFROM THE TOP OF PROGRAM" "THERE IS A DEVICE IN THE PROGRAM (MAIN) THAT IS OUTSIDE OF THE RANGE. CHECK THE PROGRAM AND CORRECT THE DEVICE THAT IS OUTSIDE THE RANGE." Anyway I decided to delete the plc memory. After that the run was stop blinking and the error led went off. Only the error on the printer-ram module was on (This module was changed with a know functioning one witout any variation on behaviour). I thought that problem has gone now that the cpu is empty. I tried again to write the program to the plc but again i take the above mentioned messages. Now I have an empty plc and a program on the Gx developer that cannot be written to plc!!!!!!!!!!!!!!!!!!!!!!!!! I am desperate!!! I do not know how to proceed. I am not knowing the mitsubishi development environment. Other than Gx developer I tried to install the GX simulation but it not works to my computer. At this point I dont know even if the ladder program is somehow corrupted after the described above messages. I can sent the code (GX developer project) and any other information to someone expert, if necessary, to have an opinion. Please help!!! Let me know how to proceed!! I have to write back the code to plc !!!!! Thank you all in advance!! Now i realised that there is SFC that is my problem. Could someone help please? Big part of ladder is in yellow color. How can i proceed?

Hi, I am looking at options for integrating MATLAB/Simulink with Q-series PLC (Q04UDE) for hardware-in-the-loop simulations. I would like to have a Simulink model send speed/torque setpoints to the PLC and have measured values feedback from the PLC to the model. I know this can be done via OPC but I think the update rate may too slow for our purposes (I would ideally like to have <100ms update rate). Also, I saw Simulink have a toolbox for converting their models to PLC code, but they don't seem to support Mitsubishi PLCs. Anyone have any ideas on how this can be done? Thanks, Darren

Hiya Guys, New here (first post!) - and I'm fairly new to Connected Components Workbench, so apologies for the mammoth post! I am currently developing a System using one Micro850 PLC and one PanelView C600 HMI. I am able to update the current HMI time by sending Unsigned-Integers to Global Connection Tags: System Clock – Hour ($SysClockHour);System Clock – Minute ($SysClockMinute);System Clock – Second ($SysClockSecond);However, if using the same “update time” more than once, this method does not work as the HMI is looking for a “change” in a Tag before an update occurs (Tag-specific). For example, we require to be able to receive a “synchronisation signal” on a digital-input on the PLC each day at 15:00:00. This will only work once as, even though the HMI’s current time updates every second, I will still be sending the values “15”, “0”, and “0” to the above Tags (which will therefore not force an update – as they haven’t changed). I cannot reset these Tags without updating the current Time – as any number “out of range” causes an error (incidentally the errors are shown on the HMI to occur on Tags “SysClockSecondTimed”, “SysClockMinuteTimed”, and “SysClockHour” – note the omission of the word “Timed” on the Hours error…). There appears to be no reference to these “Timed” Tags anywhere in CCW, and I have no idea why the “Hour” update errors on a different (the correct?!) Tag. It’s a pretty confusing problem and difficult to explain… it took me a while to get my head around it – and I can see what the code is doing! J I've looked for documentation on how these Global Connection Tags work, but I can't find anything. Everything I (think I) know so far is from extensive testing... so if anyone knows of any documentation, or has any suggestions as to how I can achieve the required result - that would be massively helpful! Thanks for taking the time to read all this! Cheers, Steve.

Dear Experts; I have already install a 10 slot chassis in a system. Now for the further process i need to add 5 slot expansion chassis for further I/O modules. I have now 5 slot expansion chassis part number IC693CHS398. But when i configure the hardware by using LM90 software i have not seen the option of expansion chassis. Image are attached. Please guide me how i install or cofigure the expansion chassis ? Regards

Hello Experts, Good day to you all. I just can’t figure how I will integrate five S7-300 PLC. CPU 315-2dp. (1.Blow moulding-> 2. filler-> 3. labeller-> 4. packer-> 5. Palletizer) I just want to get the speed of its machine, the output rate and the alarm, this is purely monitoring, archiving, no need to control anything here. I planning about SCADA system. I’m thinking if I could do the same way in my previous project, which I’ve done in profibus master/slave for two s7-300. But this time the five PLC’s already set the profibus as master to the danfoss drive, sew drives, ET200s and many more profibus slave. I plan to buy 1 PLC as master and I will set all as slave, but how since all the five existing PLC, its profibus already configured as master. Thank you very much. All your inputs is really appreciated.

Hello all, I am experiencing an unusual (and what appears to be an unheard of) behavior in my CompactLogix L18ER controller. I am setting the date/time of the controller from my work station, however when I GSV WallClockTime, it is reporting 4 hours different. I have asked our local resources as well as done some forum and knowledgebase searching without result. Has anyone encountered this before? Attached is a screenshot of the controller time vs. the wall clock time. This isn't mission critical since it can be manually adjusted however I would like to understand what is taking place that would cause this behavior. Thanks!

I need to replace existing encoder with quadrature output which is failing. We need to have minimum measuring distance of 60 inches. The encoder installed by manufacturer is Temposonics R-series RHS0650UMSO1Q1AC10 The resolution can be lower than the current encoder, probably 500 counts/inch or higher would be OK. Do you have any product that can be used? I was thinking about string encoder but I am open to suggestions.

Hello! I need to count the number of pulses SM410. Use instructions Counter_M has no effect. How to count the number of pulses(100 mc)? My soft:GX Works2. My plc is L-series(L02SCPU). In FX series It works well.

Hi I have a scenario where I need to setup communication between a Mitsubishi L-series PLC to Schneider Modicon M580. I need to use the onboard ethernet port of the L-series PLC. The protocol I need to use, is Ethernet IP. (socket communication). Can someone please assist?

Hi everyone, I want to develop a logic for security alert system. I have to generate an alarm at irregular time intervals. No one should know the time interval. PLC has to give a digital output at any time. How to create this logic? Regards Joshua

Hi, I have a problem with my BC9020 and hope that someone can help me. I managed to set the IP adress of my PLC in the 10.2.5... add a root, run a program and make the PLC working for a while. I then tried another program, a new one... and now that I want to re-read the first program, Twincat System Manager doesn't allow me to enter in the "run mode" and stays in "config mode". It also has lost the IP address I set (10.2.5.....) and came back to the 172.16.22... (manufacturer settings) I cannot determine if the problem is in the PLC Control or In System Manager... This is my method to change the IP *** IP config *** 1) Reset the PLC First I place the end terminal next to the PLC. I set the DIP switches 1,6,7 to ON, power on the PLC and power off. I set the DIP switches 2,6,7 to ON, power on the PLC and power off. I set the DIP switches 1,2,6,7 to ON, power on the PLC and power off. 2) Set my PLC on the same AMS than my own IP (172.16.22...1.1) 3) In System Manager, add a new route 4) change the setting in I/O Configuration -> I/O Device -> Device 2(BX9000) -> clic on BX9000 define "set IP Address" to Manual define " IP Address" to 10.2.5...., the AMS change automatically. Press the configuration button and then Ctrl+F4 (run mode) This method worked but seems not to be the best... If you have any Ideas ? or questions? Thank you in advance Gregi

I currently have a NT21HMI that does not have the system software loaded. I do not have any system programs with the *.21 extension. Where can I find the NT21 system software?